diff mbox series

[v4,2/2] ARM: dts: bcm5301x: Add SEAMA compatibles

Message ID 20230713-seama-partitions-v4-2-69e577453d40@linaro.org
State New
Headers show
Series (no cover subject) | expand

Commit Message

Linus Walleij July 12, 2023, 10:16 p.m. UTC 
This adds SEAMA compatibles to the firmware partition of these
two D-Link devices.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 1 +
 arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 1 +
 2 files changed, 2 insertions(+)

Comments

Florian Fainelli July 21, 2023, 5:06 p.m. UTC | #1 
On 7/12/2023 3:16 PM, Linus Walleij wrote:
> This adds SEAMA compatibles to the firmware partition of these
> two D-Link devices.
> 
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Applied by adjusting the patch after 6.5-rc1 moved the various DTS files 
to vendor directories. Thanks Linus!
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 555fbe41dd8f..cf3000b07eea 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -33,6 +33,7 @@  partitions {
 				#size-cells = <1>;
 
 				partition@0 {
+					compatible = "seama";
 					label = "firmware";
 					reg = <0x00000000 0x08000000>;
 				};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
index d945a20b06e0..3551f855ff20 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
@@ -149,6 +149,7 @@  partitions {
 		 * partitions: this device uses SEAMA.
 		 */
 		firmware@0 {
+			compatible = "seama";
 			label = "firmware";
 			reg = <0x00000000 0x08000000>;
 		};