Message ID | 20220913084023.2451929-1-yaliang.wang@windriver.com |
---|---|
State | Changes Requested |
Delegated to: | Ambarus Tudor |
Headers | show |
Series | mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with gd25q256_post_bfpt | expand |
In case the mail list can't receive the email, I'd like to send the email again. Sorry, I didn't make it clear. I'm doing this because the flash info member parse_sfdp is initialized to "true" by PARSE_SFDP macro, as you can see below { "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512) PARSE_SFDP FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6) FIXUP_FLAGS(SPI_NOR_4B_OPCODES) .fixups = &gd25q256_fixups }, And when parse_sfdp is true, the function spi_nor_init_params() will call spi_nor_parse_sfdp() to initialize the parameters, and I can't see any other place to call the original default_init() hook in the fixups other than in spi_nor_init_params_deprecated() -> spi_nor_manufacturer_init_params(). After checking the history of why we are adding this, that is to say the commit 48e4d973aefe ("mtd: spi-nor: Add a default_init() fixup hook for gd25q256") and the corresponding disscusions, I believe it was added for some reason, and we need to add back this function. On 9/13/22 18:46, Vanessa Page wrote: > **[Please note: This e-mail is from an EXTERNAL e-mail address] > > Why are you doing this? > ------------------------------------------------------------------------ > *From:* linux-mtd <linux-mtd-bounces@lists.infradead.org> on behalf of > yaliang.wang@windriver.com <yaliang.wang@windriver.com> > *Sent:* Tuesday, September 13, 2022 4:40 AM > *To:* tudor.ambarus@microchip.com <tudor.ambarus@microchip.com>; > pratyush@kernel.org <pratyush@kernel.org>; michael@walle.cc > <michael@walle.cc>; miquel.raynal@bootlin.com > <miquel.raynal@bootlin.com>; richard@nod.at <richard@nod.at>; > vigneshr@ti.com <vigneshr@ti.com> > *Cc:* linux-mtd@lists.infradead.org <linux-mtd@lists.infradead.org>; > linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> > *Subject:* [PATCH] mtd: spi-nor: gigadevice: gd25q256: replace > gd25q256_default_init with gd25q256_post_bfpt > From: Yaliang Wang <Yaliang.Wang@windriver.com> > > When utilizing PARSE_SFDP to initialize the flash parameter, the > deprecated initializing method spi_nor_init_params_deprecated() and the > function spi_nor_manufacturer_init_params() within it will never be > executed, which results in the default_init hook function will also never > be executed. As we do have quad enable function defined in BFPT, the > post_bfpt hook will be the right place to tweak the function. > > Cc: stable@vger.kernel.org > Fixes: 047275f7de18 ("mtd: spi-nor: gigadevice: gd25q256: Init flash > based on SFDP") > Reported-by: kernel test robot <lkp@intel.com> > Signed-off-by: Yaliang Wang <Yaliang.Wang@windriver.com> > --- > drivers/mtd/spi-nor/gigadevice.c | 11 ++++++++--- > 1 file changed, 8 insertions(+), 3 deletions(-) > > diff --git a/drivers/mtd/spi-nor/gigadevice.c > b/drivers/mtd/spi-nor/gigadevice.c > index 119b38e6fc2a..bdc4d73424af 100644 > --- a/drivers/mtd/spi-nor/gigadevice.c > +++ b/drivers/mtd/spi-nor/gigadevice.c > @@ -8,19 +8,24 @@ > > #include "core.h" > > -static void gd25q256_default_init(struct spi_nor *nor) > +static int > +gd25q256_post_bfpt(struct spi_nor *nor, > + const struct sfdp_parameter_header *bfpt_header, > + const struct sfdp_bfpt *bfpt) > { > /* > * Some manufacturer like GigaDevice may use different > * bit to set QE on different memories, so the MFR can't > * indicate the quad_enable method for this case, we need > - * to set it in the default_init fixup hook. > + * to set it in the post_bfpt fixup hook. > */ > nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable; > + > + return 0; > } > > static const struct spi_nor_fixups gd25q256_fixups = { > - .default_init = gd25q256_default_init, > + .post_bfpt = gd25q256_post_bfpt, > }; > > static const struct flash_info gigadevice_nor_parts[] = { > -- > 2.34.1 > > > ______________________________________________________ > Linux MTD discussion mailing list > http://lists.infradead.org/mailman/listinfo/linux-mtd/ > <https://urldefense.com/v3/__http://lists.infradead.org/mailman/listinfo/linux-mtd/__;!!AjveYdw8EvQ!cFcIju_6rdasA67JAVB5Ww727YTj7uzWhJ8HjkRjEJmn-BFGWsga9mPTqCo_m8WFT4Jcu8Uj0iME34B3OOc$>
Am 2022-09-14 05:05, schrieb Yaliang Wang: > In case the mail list can't receive the email, I'd like to send the > email again. > > Sorry, I didn't make it clear. > I'm doing this because the flash info member parse_sfdp is initialized > to "true" by PARSE_SFDP macro, as you can see below > { "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512) > PARSE_SFDP > FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | > SPI_NOR_TB_SR_BIT6) > FIXUP_FLAGS(SPI_NOR_4B_OPCODES) > .fixups = &gd25q256_fixups }, > > And when parse_sfdp is true, the function spi_nor_init_params() will > call spi_nor_parse_sfdp() to initialize the parameters, and I can't > see any other place to call the original default_init() hook in the > fixups other than in spi_nor_init_params_deprecated() -> > spi_nor_manufacturer_init_params(). > > After checking the history of why we are adding this, that is to say > the commit 48e4d973aefe ("mtd: spi-nor: Add a default_init() fixup > hook for gd25q256") and the corresponding disscusions, I believe it > was added for some reason, and we need to add back this function. > > On 9/13/22 18:46, Vanessa Page wrote: >> **[Please note: This e-mail is from an EXTERNAL e-mail address] >> >> Why are you doing this? Vanessa Page is a bot/troll. -michael
On 9/13/22 11:40, yaliang.wang@windriver.com wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > From: Yaliang Wang <Yaliang.Wang@windriver.com> > > When utilizing PARSE_SFDP to initialize the flash parameter, the > deprecated initializing method spi_nor_init_params_deprecated() and the > function spi_nor_manufacturer_init_params() within it will never be > executed, which results in the default_init hook function will also never > be executed. As we do have quad enable function defined in BFPT, the > post_bfpt hook will be the right place to tweak the function. > > Cc: stable@vger.kernel.org > Fixes: 047275f7de18 ("mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP") > Reported-by: kernel test robot <lkp@intel.com> > Signed-off-by: Yaliang Wang <Yaliang.Wang@windriver.com> > --- > drivers/mtd/spi-nor/gigadevice.c | 11 ++++++++--- > 1 file changed, 8 insertions(+), 3 deletions(-) > > diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c > index 119b38e6fc2a..bdc4d73424af 100644 > --- a/drivers/mtd/spi-nor/gigadevice.c > +++ b/drivers/mtd/spi-nor/gigadevice.c > @@ -8,19 +8,24 @@ > > #include "core.h" > > -static void gd25q256_default_init(struct spi_nor *nor) > +static int > +gd25q256_post_bfpt(struct spi_nor *nor, > + const struct sfdp_parameter_header *bfpt_header, > + const struct sfdp_bfpt *bfpt) > { > /* > * Some manufacturer like GigaDevice may use different > * bit to set QE on different memories, so the MFR can't > * indicate the quad_enable method for this case, we need > - * to set it in the default_init fixup hook. > + * to set it in the post_bfpt fixup hook. > */ > nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable; > + > + return 0; > } Maybe we can get rid of this fixup hook entirely. If it was a default_init(), then it was set before the SFDP was parsed, so the quad_enable method was overwritten anyway. Would you please check why this method was introduced? What Quad Enable method do you get from SFDP? I expect that spi_nor_sr1_bit6_quad_enable, and the fixup hook to be in vain. > > static const struct spi_nor_fixups gd25q256_fixups = { > - .default_init = gd25q256_default_init, > + .post_bfpt = gd25q256_post_bfpt, > }; > > static const struct flash_info gigadevice_nor_parts[] = { > -- > 2.34.1 >
On 10/3/22 13:35, Tudor.Ambarus@microchip.com wrote: > [Please note: This e-mail is from an EXTERNAL e-mail address] > > On 9/13/22 11:40, yaliang.wang@windriver.com wrote: >> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe >> >> From: Yaliang Wang <Yaliang.Wang@windriver.com> >> >> When utilizing PARSE_SFDP to initialize the flash parameter, the >> deprecated initializing method spi_nor_init_params_deprecated() and the >> function spi_nor_manufacturer_init_params() within it will never be >> executed, which results in the default_init hook function will also never >> be executed. As we do have quad enable function defined in BFPT, the >> post_bfpt hook will be the right place to tweak the function. >> >> Cc: stable@vger.kernel.org >> Fixes: 047275f7de18 ("mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP") >> Reported-by: kernel test robot <lkp@intel.com> >> Signed-off-by: Yaliang Wang <Yaliang.Wang@windriver.com> >> --- >> drivers/mtd/spi-nor/gigadevice.c | 11 ++++++++--- >> 1 file changed, 8 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c >> index 119b38e6fc2a..bdc4d73424af 100644 >> --- a/drivers/mtd/spi-nor/gigadevice.c >> +++ b/drivers/mtd/spi-nor/gigadevice.c >> @@ -8,19 +8,24 @@ >> >> #include "core.h" >> >> -static void gd25q256_default_init(struct spi_nor *nor) >> +static int >> +gd25q256_post_bfpt(struct spi_nor *nor, >> + const struct sfdp_parameter_header *bfpt_header, >> + const struct sfdp_bfpt *bfpt) >> { >> /* >> * Some manufacturer like GigaDevice may use different >> * bit to set QE on different memories, so the MFR can't >> * indicate the quad_enable method for this case, we need >> - * to set it in the default_init fixup hook. >> + * to set it in the post_bfpt fixup hook. >> */ >> nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable; >> + >> + return 0; >> } > > Maybe we can get rid of this fixup hook entirely. If it was a default_init(), then it > was set before the SFDP was parsed, so the quad_enable method was overwritten anyway. > Would you please check why this method was introduced? I googled the gd25q256 datasheet, and found 'C' generation datasheet(GD25Q256C[1]) implements the JESD216 standards, it doesn't have the QER(Quad Enable Requirements) field in BFPT, but it does have the QE bit in SR1 bit6, this may be the reason why the method was introduced. [1]https://datasheetspdf.com/pdf-file/1295936/GigaDevice/GD25Q256C/1 > > What Quad Enable method do you get from SFDP? I expect that spi_nor_sr1_bit6_quad_enable, > and the fixup hook to be in vain. As above mentioned, 'C' generation doesn't have the QER field in BFPT, so no corresponding quad_enable method can be found in SFDP. Regrading to 'D' generation [2], it implements the JESD216B standards, the corresponding quad_enable method is spi_nor_sr2_bit1_quad_enable, parsing the BFPT can get the right method. As for 'E' generation[3], it also implements the JESD216B standards and has the same status registers as defined in 'D' generation, but its datasheet doesn't contain SFDP and BFPT definations, so there may be some uncertain. So, in summary, I think 'C' generation devices still need the post_bfpt to add the correct quad_enable method, this can do some benefits to the outdated devices. For sure, the post_bfpt method should distinguish the JESD216 standards the first and then apply the correct quad_enable method, I can cook another patch to do this. [2]https://www.gigadevice.com/datasheet/gd25q256d/ [3]https://www.gigadevice.com/datasheet/gd25q256e/ > >> >> static const struct spi_nor_fixups gd25q256_fixups = { >> - .default_init = gd25q256_default_init, >> + .post_bfpt = gd25q256_post_bfpt, >> }; >> >> static const struct flash_info gigadevice_nor_parts[] = { >> -- >> 2.34.1 >> > > > -- > Cheers, > ta
diff --git a/drivers/mtd/spi-nor/gigadevice.c b/drivers/mtd/spi-nor/gigadevice.c index 119b38e6fc2a..bdc4d73424af 100644 --- a/drivers/mtd/spi-nor/gigadevice.c +++ b/drivers/mtd/spi-nor/gigadevice.c @@ -8,19 +8,24 @@ #include "core.h" -static void gd25q256_default_init(struct spi_nor *nor) +static int +gd25q256_post_bfpt(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt) { /* * Some manufacturer like GigaDevice may use different * bit to set QE on different memories, so the MFR can't * indicate the quad_enable method for this case, we need - * to set it in the default_init fixup hook. + * to set it in the post_bfpt fixup hook. */ nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable; + + return 0; } static const struct spi_nor_fixups gd25q256_fixups = { - .default_init = gd25q256_default_init, + .post_bfpt = gd25q256_post_bfpt, }; static const struct flash_info gigadevice_nor_parts[] = {