diff mbox series

[v3,1/2] dt-bindings: mtd: spi-nor: Add reset-gpios property

Message ID 20220908064428.2962-2-sai.krishna.potthuri@amd.com
State Accepted
Delegated to: Ambarus Tudor
Headers show
Series mtd: spi-nor: Add flash device reset support | expand

Commit Message

Sai Krishna Potthuri Sept. 8, 2022, 6:44 a.m. UTC 
SPI-NOR flashes have RESET pin which can be toggled using GPIO
controller, for those platforms reset-gpios property can be used to
reset the flash device.

Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
---
 Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Krzysztof Kozlowski Sept. 8, 2022, 11:05 a.m. UTC | #1 
On 08/09/2022 08:44, Sai Krishna Potthuri wrote:
> SPI-NOR flashes have RESET pin which can be toggled using GPIO
> controller, for those platforms reset-gpios property can be used to
> reset the flash device.
> 
> Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
index 7149784a36ac..8a843b9b8673 100644
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -70,6 +70,12 @@  properties:
       be used on such systems, to denote the absence of a reliable reset
       mechanism.
 
+  reset-gpios:
+    description:
+      A GPIO line connected to the RESET (active low) signal of the device.
+      If "broken-flash-reset" is present then having this property does not
+      make any difference.
+
   partitions:
     type: object
 
@@ -88,6 +94,7 @@  unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -97,6 +104,7 @@  examples:
             reg = <0>;
             spi-max-frequency = <40000000>;
             m25p,fast-read;
+            reset-gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
         };
     };
 ...