diff mbox series

[v1,07/11] PCI: apple: switch to using fwnode_gpiod_get_index()

Message ID 20220903-gpiod_get_from_of_node-remove-v1-7-b29adfb27a6c@gmail.com
State Not Applicable
Headers show
Series Get rid of [devm_]gpiod_get_from_of_node() public APIs | expand

Commit Message

Dmitry Torokhov Sept. 5, 2022, 6:30 a.m. UTC
I would like to stop exporting OF-specific gpiod_get_from_of_node()
so that gpiolib can be cleaned a bit, so let's switch to the generic
fwnode property API.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Comments

Dmitry Torokhov Sept. 6, 2022, 12:19 a.m. UTC | #1
On Sun, Sep 04, 2022 at 11:30:59PM -0700, Dmitry Torokhov wrote:
> I would like to stop exporting OF-specific gpiod_get_from_of_node()
> so that gpiolib can be cleaned a bit, so let's switch to the generic
> fwnode property API.
> 
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> 
> diff --git a/drivers/pci/controller/pcie-apple.c b/drivers/pci/controller/pcie-apple.c
> index a2c3c207a04b..d83817d3ff86 100644
> --- a/drivers/pci/controller/pcie-apple.c
> +++ b/drivers/pci/controller/pcie-apple.c
> @@ -516,8 +516,8 @@ static int apple_pcie_setup_port(struct apple_pcie *pcie,
>  	u32 stat, idx;
>  	int ret, i;
>  
> -	reset = gpiod_get_from_of_node(np, "reset-gpios", 0,
> -				       GPIOD_OUT_LOW, "PERST#");
> +	reset = fwnode_gpiod_get_index(of_fwnode_handle(np),
> +				       "reset", 0, GPIOD_OUT_LOW, "PERST#");

Hmm, I am looking at the driver and it leaks the reset gpio on
unbind/unload. I guess it does not matter in practice, but still nice
not to leak. Thankfully it is easy to cure by switching to devm option:
devm_fwnode_gpiod_get().

I'll send and updated patch with a new justification.

Thanks.
Linus Walleij Sept. 8, 2022, 8:33 a.m. UTC | #2
On Tue, Sep 6, 2022 at 2:19 AM Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:

> On Sun, Sep 04, 2022 at 11:30:59PM -0700, Dmitry Torokhov wrote:
> > I would like to stop exporting OF-specific gpiod_get_from_of_node()
> > so that gpiolib can be cleaned a bit, so let's switch to the generic
> > fwnode property API.
> >
> > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> >
> > diff --git a/drivers/pci/controller/pcie-apple.c b/drivers/pci/controller/pcie-apple.c
> > index a2c3c207a04b..d83817d3ff86 100644
> > --- a/drivers/pci/controller/pcie-apple.c
> > +++ b/drivers/pci/controller/pcie-apple.c
> > @@ -516,8 +516,8 @@ static int apple_pcie_setup_port(struct apple_pcie *pcie,
> >       u32 stat, idx;
> >       int ret, i;
> >
> > -     reset = gpiod_get_from_of_node(np, "reset-gpios", 0,
> > -                                    GPIOD_OUT_LOW, "PERST#");
> > +     reset = fwnode_gpiod_get_index(of_fwnode_handle(np),
> > +                                    "reset", 0, GPIOD_OUT_LOW, "PERST#");
>
> Hmm, I am looking at the driver and it leaks the reset gpio on
> unbind/unload. I guess it does not matter in practice, but still nice
> not to leak. Thankfully it is easy to cure by switching to devm option:
> devm_fwnode_gpiod_get().
>
> I'll send and updated patch with a new justification.

With that change:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-apple.c b/drivers/pci/controller/pcie-apple.c
index a2c3c207a04b..d83817d3ff86 100644
--- a/drivers/pci/controller/pcie-apple.c
+++ b/drivers/pci/controller/pcie-apple.c
@@ -516,8 +516,8 @@  static int apple_pcie_setup_port(struct apple_pcie *pcie,
 	u32 stat, idx;
 	int ret, i;
 
-	reset = gpiod_get_from_of_node(np, "reset-gpios", 0,
-				       GPIOD_OUT_LOW, "PERST#");
+	reset = fwnode_gpiod_get_index(of_fwnode_handle(np),
+				       "reset", 0, GPIOD_OUT_LOW, "PERST#");
 	if (IS_ERR(reset))
 		return PTR_ERR(reset);