diff mbox series

[v2,4/4] mtd: spi-nor: implement OTP support for Winbond and similar flashes

Message ID 20200911222634.31804-5-michael@walle.cc
State New
Delegated to: Vignesh R
Headers show
Series mtd: spi-nor: OTP support | expand

Commit Message

Michael Walle Sept. 11, 2020, 10:26 p.m. UTC
Use the new OTP ops to implement OTP access on Winbond flashes. Most
Winbond flashes provides up to four different OTP areas ("Security
Registers"). Newer flashes uses the first OTP area for SFDP data. Thus,
for these flashes only the last three areas are handled and the first
one is left untouched.

This was tested on a Winbond W25Q32JW as well as on a W25Q32FW.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 drivers/mtd/spi-nor/core.c    | 161 ++++++++++++++++++++++++++++++++++
 drivers/mtd/spi-nor/core.h    |   4 +
 drivers/mtd/spi-nor/winbond.c |  18 +++-
 include/linux/mtd/spi-nor.h   |  10 +++
 4 files changed, 191 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 348db19958e9..c150e3b6ee44 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2997,6 +2997,167 @@  int spi_nor_otp_is_locked_scur(struct spi_nor *nor, unsigned int region)
 	return *scur & SCUR_LDSO;
 }
 
+/**
+ * spi_nor_otp_read_secr() - read OTP data
+ * @nor:	pointer to 'struct spi_nor'
+ * @from:       offset to read from
+ * @len:        number of bytes to read
+ * @buf:        pointer to dst buffer
+ *
+ * Read OTP data by using the SPINOR_OP_RSECR commands. This method is used on
+ * GigaDevice and Winbond flashes.
+ *
+ * Return: number of bytes read successfully, -errno otherwise
+ */
+int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, uint64_t len, u8 *buf)
+{
+	u8 addr_width, read_opcode, read_dummy;
+	struct spi_mem_dirmap_desc *rdesc;
+	enum spi_nor_protocol read_proto;
+	int ret;
+
+	read_opcode = nor->read_opcode;
+	addr_width = nor->addr_width;
+	read_dummy = nor->read_dummy;
+	read_proto = nor->read_proto;
+	rdesc = nor->dirmap.rdesc;
+
+	nor->read_opcode = SPINOR_OP_RSECR;
+	nor->addr_width = 3;
+	nor->read_dummy = 8;
+	nor->read_proto = SNOR_PROTO_1_1_1;
+	nor->dirmap.rdesc = NULL;
+
+	ret = spi_nor_read_data(nor, addr, len, buf);
+
+	nor->read_opcode = read_opcode;
+	nor->addr_width = addr_width;
+	nor->read_dummy = read_dummy;
+	nor->read_proto = read_proto;
+	nor->dirmap.rdesc = rdesc;
+
+	return ret;
+}
+
+/**
+ * spi_nor_otp_write_secr() - write OTP data
+ * @nor:        pointer to 'struct spi_nor'
+ * @to:         offset to write to
+ * @len:        number of bytes to write
+ * @buf:        pointer to src buffer
+ *
+ * Write OTP data by using the SPINOR_OP_PSECR commands. This method is used on
+ * GigaDevice and Winbond flashes.
+ *
+ * Return: number of bytes written successfully, -errno otherwise
+ */
+int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, uint64_t len, u8 *buf)
+{
+	enum spi_nor_protocol write_proto;
+	struct spi_mem_dirmap_desc *wdesc;
+	u8 addr_width, program_opcode;
+	int ret;
+
+	program_opcode = nor->program_opcode;
+	addr_width = nor->addr_width;
+	write_proto = nor->write_proto;
+	wdesc = nor->dirmap.wdesc;
+
+	nor->program_opcode = SPINOR_OP_PSECR;
+	nor->addr_width = 3;
+	nor->write_proto = SNOR_PROTO_1_1_1;
+	nor->dirmap.wdesc = NULL;
+
+	/*
+	 * We only support a write to one single page. For now all winbond
+	 * flashes only have one page per OTP region.
+	 */
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		goto out;
+
+	ret = spi_nor_write_data(nor, addr, len, buf);
+	if (ret < 0)
+		goto out;
+
+	ret = spi_nor_wait_till_ready(nor);
+
+out:
+	nor->program_opcode = program_opcode;
+	nor->addr_width = addr_width;
+	nor->write_proto = write_proto;
+	nor->dirmap.wdesc = wdesc;
+
+	return ret;
+}
+
+static int spi_nor_otp_lock_bit_cr(unsigned int region)
+{
+	static const int lock_bits[] = { SR2_LB1, SR2_LB2, SR2_LB3 };
+
+	if (region >= ARRAY_SIZE(lock_bits))
+		return -EINVAL;
+
+	return lock_bits[region];
+}
+
+/**
+ * spi_nor_otp_lock_sr2() - lock the OTP region
+ * @nor:        pointer to 'struct spi_nor'
+ * @region:     OTP region
+ *
+ * Lock the OTP region by writing the status register-2. This method is used on
+ * GigaDevice and Winbond flashes.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_otp_lock_sr2(struct spi_nor *nor, unsigned int region)
+{
+	int lock_bit;
+	u8 *sr2 = nor->bouncebuf;
+	int ret;
+
+	lock_bit = spi_nor_otp_lock_bit_cr(region);
+	if (lock_bit < 0)
+		return lock_bit;
+
+	ret = spi_nor_read_cr(nor, sr2);
+	if (ret)
+		return ret;
+
+	/* check if its already locked */
+	if (*sr2 & lock_bit)
+		return 0;
+
+	return spi_nor_write_16bit_cr_and_check(nor, *sr2 | lock_bit);
+}
+
+/**
+ * spi_nor_otp_is_locked_sr2() - get the OTP region lock status
+ * @nor:        pointer to 'struct spi_nor'
+ * @region:     OTP region
+ *
+ * Retrieve the OTP region lock bit by reading the status register-2. This
+ * method is used on GigaDevice and Winbond flashes.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_otp_is_locked_sr2(struct spi_nor *nor, unsigned int region)
+{
+	int lock_bit;
+	u8 *sr2 = nor->bouncebuf;
+	int ret;
+
+	lock_bit = spi_nor_otp_lock_bit_cr(region);
+	if (lock_bit < 0)
+		return lock_bit;
+
+	ret = spi_nor_read_cr(nor, sr2);
+	if (ret)
+		return ret;
+
+	return (*sr2 & lock_bit);
+}
 
 static int spi_nor_init(struct spi_nor *nor)
 {
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 7ec4add17b72..74bbb7aef1f1 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -472,6 +472,10 @@  int spi_nor_otp_read_otp_mode(struct spi_nor *nor, loff_t from, uint64_t len, u8
 int spi_nor_otp_write_otp_mode(struct spi_nor *nor, loff_t to, uint64_t len, u8 *buf);
 int spi_nor_otp_lock_scur(struct spi_nor *nor, unsigned int region);
 int spi_nor_otp_is_locked_scur(struct spi_nor *nor, unsigned int region);
+int spi_nor_otp_read_secr(struct spi_nor *nor, loff_t addr, uint64_t len, u8 *buf);
+int spi_nor_otp_write_secr(struct spi_nor *nor, loff_t addr, uint64_t len, u8 *buf);
+int spi_nor_otp_lock_sr2(struct spi_nor *nor, unsigned int region);
+int spi_nor_otp_is_locked_sr2(struct spi_nor *nor, unsigned int region);
 
 int spi_nor_hwcaps_read2cmd(u32 hwcaps);
 u8 spi_nor_convert_3to4_read(u8 opcode);
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index 6dcde15fb1aa..3b14e96e993f 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -55,14 +55,19 @@  static const struct flash_info winbond_parts[] = {
 	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
 	{ "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64,
 			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+			   OTP_INFO(256, 3, 0x1000, 0x1000)
+	},
+
 	{ "w25q32jv", INFO(0xef7016, 0, 64 * 1024,  64,
 			   SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			   SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
 	},
 	{ "w25q32jwm", INFO(0xef8016, 0, 64 * 1024,  64,
 			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+			    OTP_INFO(256, 3, 0x1000, 0x1000)
+	},
 	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
 	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128,
 			 SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
@@ -122,9 +127,18 @@  static int winbond_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
 	return spi_nor_write_disable(nor);
 }
 
+static const struct spi_nor_otp_ops winbond_otp_ops = {
+	.read = spi_nor_otp_read_secr,
+	.write = spi_nor_otp_write_secr,
+	.lock = spi_nor_otp_lock_sr2,
+	.is_locked = spi_nor_otp_is_locked_sr2,
+};
+
 static void winbond_default_init(struct spi_nor *nor)
 {
 	nor->params->set_4byte_addr_mode = winbond_set_4byte_addr_mode;
+	if (nor->params->otp_info.n_otps)
+		nor->params->otp_ops = &winbond_otp_ops;
 }
 
 static const struct spi_nor_fixups winbond_fixups = {
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 04195d3e43b8..4750fb631c96 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -110,6 +110,11 @@ 
 #define SPINOR_OP_RD_EVCR      0x65    /* Read EVCR register */
 #define SPINOR_OP_WD_EVCR      0x61    /* Write EVCR register */
 
+/* Used for GigaDevices and Winbond flashes. */
+#define SPINOR_OP_ESECR		0x44	/* Erase Security registers */
+#define SPINOR_OP_PSECR		0x42	/* Program Security registers */
+#define SPINOR_OP_RSECR		0x48	/* Read Security registers */
+
 /* Status Register bits. */
 #define SR_WIP			BIT(0)	/* Write in progress */
 #define SR_WEL			BIT(1)	/* Write enable latch */
@@ -141,8 +146,13 @@ 
 
 /* Status Register 2 bits. */
 #define SR2_QUAD_EN_BIT1	BIT(1)
+#define SR2_LB0			BIT(2)	/* Security Register Lock Bit 0 */
+#define SR2_LB1			BIT(3)	/* Security Register Lock Bit 1 */
+#define SR2_LB2			BIT(4)	/* Security Register Lock Bit 2 */
+#define SR2_LB3			BIT(5)	/* Security Register Lock Bit 3 */
 #define SR2_QUAD_EN_BIT7	BIT(7)
 
+
 /* Supported SPI protocols */
 #define SNOR_PROTO_INST_MASK	GENMASK(23, 16)
 #define SNOR_PROTO_INST_SHIFT	16