From patchwork Tue Jun 23 18:30:29 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pratyush Yadav X-Patchwork-Id: 1315431 X-Patchwork-Delegate: tudor.ambarus@gmail.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=lists.infradead.org (client-ip=2001:8b0:10b:1231::1; helo=merlin.infradead.org; envelope-from=linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=lists.infradead.org header.i=@lists.infradead.org header.a=rsa-sha256 header.s=merlin.20170209 header.b=CXizXCjB; dkim=fail reason="signature verification failed" (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=QfBHdwJa; dkim-atps=neutral Received: from merlin.infradead.org (merlin.infradead.org [IPv6:2001:8b0:10b:1231::1]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 49rw9b1177z9sRN for ; Wed, 24 Jun 2020 04:41:55 +1000 (AEST) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-ID:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=6OqehRCVbf5Ne/GdjjPW/suNfzmEAFJHCC/BvvySh4c=; b=CXizXCjBssRuJG4su+Ead6DNC BxlWHRfIDXtoBC4pbzdlQufYzeYq7r4Wo0g5RYhjy3XlFTnUsGN/O4ZqWu45W6CYansHtxCLe5cuA jSsQIZfdIR4oVabDawmpaqUStUDORQxd9kg2KT70VIs83QjZ28N6x0Hqo+o1Xz7+eTMCARhHqB4jj 0GZ4JMxyHAN4ADNbjKxWx2LKYW3Wl7nWLeumxE+f+58e34644waNXVhg1ZmahuYLpQGvKAzCZPK9L QnnTlFrOby2lklkVrL16nxUI5KxbTfC3LMx2DAh8KQ4gOxCmww1HAlhDkFweaTlIUFieOBI+7HDgJ EKJQnCZ/Q==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1jnnql-0000SD-Hf; Tue, 23 Jun 2020 18:40:51 +0000 Received: from lelv0142.ext.ti.com ([198.47.23.249]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jnniE-0001Yq-Ie; Tue, 23 Jun 2020 18:32:04 +0000 Received: from lelv0266.itg.ti.com ([10.180.67.225]) by lelv0142.ext.ti.com (8.15.2/8.15.2) with ESMTP id 05NIVvMs060658; Tue, 23 Jun 2020 13:31:57 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1592937117; bh=y/HLkn4Xm8H/a4okJdnJEmheF7tplQwPYbHQOPoQAsg=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=QfBHdwJaGSVkQc0AClvd3MeuaxB+t1RZUVUUeMWQna18wQFYD+XcH6TDYMK/RZvfl bdhI0xglYev6JTLJpbcaUhdvilWz0dUUtWQsBJI1N+1OL7rs6XTdQr6detUl6vgrWJ OhQFkX6UcW1LHVGQ+BatrL3Yf10jXLiEI0Ns6Ipo= Received: from DLEE114.ent.ti.com (dlee114.ent.ti.com [157.170.170.25]) by lelv0266.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 05NIVvs7037905 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Tue, 23 Jun 2020 13:31:57 -0500 Received: from DLEE107.ent.ti.com (157.170.170.37) by DLEE114.ent.ti.com (157.170.170.25) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Tue, 23 Jun 2020 13:31:57 -0500 Received: from fllv0039.itg.ti.com (10.64.41.19) by DLEE107.ent.ti.com (157.170.170.37) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Tue, 23 Jun 2020 13:31:57 -0500 Received: from pratyush-OptiPlex-790.dhcp.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0039.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05NIUVJU000942; Tue, 23 Jun 2020 13:31:52 -0500 From: Pratyush Yadav To: Tudor Ambarus , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , Mark Brown , Nicolas Ferre , Alexandre Belloni , Ludovic Desroches , Matthias Brugger , Michal Simek , , , , , Subject: [PATCH v10 16/17] mtd: spi-nor: spansion: add support for Cypress Semper flash Date: Wed, 24 Jun 2020 00:00:29 +0530 Message-ID: <20200623183030.26591-17-p.yadav@ti.com> X-Mailer: git-send-email 2.25.0 In-Reply-To: <20200623183030.26591-1-p.yadav@ti.com> References: <20200623183030.26591-1-p.yadav@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 X-Spam-Note: CRM114 invocation failed X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [198.47.23.249 listed in list.dnswl.org] 0.0 RCVD_IN_MSPIKE_H3 RBL: Good reputation (+3) [198.47.23.249 listed in wl.mailspike.net] -0.0 SPF_PASS SPF: sender matches SPF record 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid 0.0 RCVD_IN_MSPIKE_WL Mailspike good senders -0.0 DKIMWL_WL_HIGH DKIMwl.org - Whitelisted High sender X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Boris Brezillon , Sekhar Nori , Pratyush Yadav Sender: "linux-mtd" Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org The Cypress Semper flash is an xSPI compliant octal DTR flash. Add support for using it in octal DTR mode. The flash by default boots in a hybrid sector mode. But the sector map table on the part I had was programmed incorrectly and the SMPT values on the flash don't match the public datasheet. Specifically, in some places erase type 3 was used instead of 4. In addition, the region sizes were incorrect in some places. So, for testing I set CFR3N[3] to enable uniform sector sizes. Since the uniform sector mode bit is a non-volatile bit, this series does not change it to avoid making any permanent changes to the flash configuration. The correct data to implement a fixup is not available right now and will be done in a follow-up patch if needed. Signed-off-by: Pratyush Yadav --- drivers/mtd/spi-nor/spansion.c | 166 +++++++++++++++++++++++++++++++++ 1 file changed, 166 insertions(+) diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c index e550cd5c9d3a..393cf4662110 100644 --- a/drivers/mtd/spi-nor/spansion.c +++ b/drivers/mtd/spi-nor/spansion.c @@ -8,6 +8,168 @@ #include "core.h" +#define SPINOR_OP_RD_ANY_REG 0x65 /* Read any register */ +#define SPINOR_OP_WR_ANY_REG 0x71 /* Write any register */ +#define SPINOR_REG_CYPRESS_CFR2V 0x00800003 +#define SPINOR_REG_CYPRESS_CFR2V_MEMLAT_11_24 0xb +#define SPINOR_REG_CYPRESS_CFR3V 0x00800004 +#define SPINOR_REG_CYPRESS_CFR3V_PGSZ BIT(4) /* Page size. */ +#define SPINOR_REG_CYPRESS_CFR5V 0x00800006 +#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN 0x3 +#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS 0 +#define SPINOR_OP_CYPRESS_RD_FAST 0xee + +/** + * spi_nor_cypress_octal_dtr_enable() - Enable octal DTR on Cypress flashes. + * @nor: pointer to a 'struct spi_nor' + * + * This also sets the memory access latency cycles to 24 to allow the flash to + * run at up to 200MHz. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_cypress_octal_dtr_enable(struct spi_nor *nor, bool enable) +{ + struct spi_mem_op op; + u8 *buf = nor->bouncebuf; + u8 addr_width; + int ret; + + if (enable) + addr_width = 3; + else + addr_width = 4; + + if (enable) { + /* Use 24 dummy cycles for memory array reads. */ + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + + *buf = SPINOR_REG_CYPRESS_CFR2V_MEMLAT_11_24; + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, + SPINOR_REG_CYPRESS_CFR2V, + 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, buf, 1)); + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) { + dev_warn(nor->dev, + "failed to set default memory latency value: %d\n", + ret); + return ret; + } + ret = spi_nor_wait_till_ready(nor); + if (ret) + return ret; + + nor->read_dummy = 24; + } + + /* Set/unset the octal and DTR enable bits. */ + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + + if (enable) + *buf = SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN; + else + *buf = SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS; + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, + SPINOR_REG_CYPRESS_CFR5V, + 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, buf, 1)); + + if (!enable) + spi_nor_spimem_setup_op(nor, &op, SNOR_PROTO_8_8_8_DTR); + + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) { + dev_warn(nor->dev, "Failed to enable octal DTR mode\n"); + return ret; + } + + return 0; +} + +static void s28hs512t_default_init(struct spi_nor *nor) +{ + nor->params->octal_dtr_enable = spi_nor_cypress_octal_dtr_enable; +} + +static void s28hs512t_post_sfdp_fixup(struct spi_nor *nor) +{ + /* + * On older versions of the flash the xSPI Profile 1.0 table has the + * 8D-8D-8D Fast Read opcode as 0x00. But it actually should be 0xEE. + */ + if (nor->params->reads[SNOR_CMD_READ_8_8_8_DTR].opcode == 0) + nor->params->reads[SNOR_CMD_READ_8_8_8_DTR].opcode = + SPINOR_OP_CYPRESS_RD_FAST; + + nor->params->hwcaps.mask |= SNOR_HWCAPS_PP_8_8_8_DTR; + + /* This flash is also missing the 4-byte Page Program opcode bit. */ + spi_nor_set_pp_settings(&nor->params->page_programs[SNOR_CMD_PP], + SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1); + /* + * Since xSPI Page Program opcode is backward compatible with + * Legacy SPI, use Legacy SPI opcode there as well. + */ + spi_nor_set_pp_settings(&nor->params->page_programs[SNOR_CMD_PP_8_8_8_DTR], + SPINOR_OP_PP_4B, SNOR_PROTO_8_8_8_DTR); + + /* + * The xSPI Profile 1.0 table advertises the number of additional + * address bytes needed for Read Status Register command as 0 but the + * actual value for that is 4. + */ + nor->params->rdsr_addr_nbytes = 4; +} + +static int s28hs512t_post_bfpt_fixup(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt, + struct spi_nor_flash_parameter *params) +{ + struct spi_mem_op op; + u8 *buf = nor->bouncebuf; + u8 addr_width = 3; + int ret; + + /* + * The BFPT table advertises a 512B page size but the page size is + * actually configurable (with the default being 256B). Read from + * CFR3V[4] and set the correct size. + */ + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR3V, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, buf, 1)); + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) + return ret; + + if (*buf & SPINOR_REG_CYPRESS_CFR3V_PGSZ) + params->page_size = 512; + else + params->page_size = 256; + + return 0; +} + +static struct spi_nor_fixups s28hs512t_fixups = { + .default_init = s28hs512t_default_init, + .post_sfdp = s28hs512t_post_sfdp_fixup, + .post_bfpt = s28hs512t_post_bfpt_fixup, +}; + static int s25fs_s_post_bfpt_fixups(struct spi_nor *nor, const struct sfdp_parameter_header *bfpt_header, @@ -104,6 +266,10 @@ static const struct flash_info spansion_parts[] = { SPI_NOR_4B_OPCODES) }, { "cy15x104q", INFO6(0x042cc2, 0x7f7f7f, 512 * 1024, 1, SPI_NOR_NO_ERASE) }, + { "s28hs512t", INFO(0x345b1a, 0, 256 * 1024, 256, + SECT_4K | SPI_NOR_OCTAL_DTR_READ) + .fixups = &s28hs512t_fixups, + }, }; static void spansion_post_sfdp_fixups(struct spi_nor *nor)