From patchwork Fri May 22 22:40:25 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pratyush Yadav X-Patchwork-Id: 1296499 X-Patchwork-Delegate: tudor.ambarus@gmail.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=lists.infradead.org (client-ip=2607:7c80:54:e::133; helo=bombadil.infradead.org; envelope-from=linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org; receiver=) Authentication-Results: ozlabs.org; dmarc=fail (p=quarantine dis=none) header.from=ti.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=lists.infradead.org header.i=@lists.infradead.org header.a=rsa-sha256 header.s=bombadil.20170209 header.b=LHRT2ips; dkim=fail reason="signature verification failed" (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.a=rsa-sha256 header.s=ti-com-17Q1 header.b=SW3ZknP6; dkim-atps=neutral Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2607:7c80:54:e::133]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 49TM2p4qMlz9sSf for ; Sat, 23 May 2020 08:43:14 +1000 (AEST) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=FEQznYWRYQKs3q+Q4t7o1wq41+F8AQ3989mYqedDorg=; b=LHRT2ipsngenCP PmJjgRc6mICx8zYZ+YJc6TC9tyey7y0TOnA3fLyR1hUHxOFQibn0y8T+iGOeQXsQguP8smH2FbBpZ 5FmWZxcncO2rcRj5UfNHfDxjTIf9+VVNQCLn6+Au3Ihi2hoh70Uya6JtAnUvt/44sOb4fagZUqEpg oBxU9snZYk+LWTPcf05Wztm9l3PV3BYHs0NhzXKQBlobpyFfL16CUDjzRz0S4r5ouZosGy4W51CNU YxzBybr5PEUhM8nTKkxewfU6dHcpdtkXM6Dd4FB3OqB/GqIr6/R1bjbKimn3V34hwy8N7AvxXD0kw BpjYZU4LLfF5Yhb5XRTg==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1jcGNY-0004JQ-W6; Fri, 22 May 2020 22:43:01 +0000 Received: from lelv0142.ext.ti.com ([198.47.23.249]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jcGLi-0002tc-6u; Fri, 22 May 2020 22:41:08 +0000 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by lelv0142.ext.ti.com (8.15.2/8.15.2) with ESMTP id 04MMexgR072226; Fri, 22 May 2020 17:40:59 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1590187259; bh=Azdt9smoMWqSXVHukSPqhyQToiLuqDE8tdXu68M9Ly8=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=SW3ZknP6Q6Vt+vMibD2zD5DlOZpfw7ffltbTlIwpR/M38JnR42CIqyatAEGwdbQRH swPd4JMcXXZE74nReB5QaEeP2nNFuMfZnR9kie6YCVeoAjHl6+Y41CUvSxW9Vad0ms 0/CUaCbdyTMVLo1Tvy10qhUMzUlFIinpJB11DJjs= Received: from DLEE115.ent.ti.com (dlee115.ent.ti.com [157.170.170.26]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 04MMexVX078392 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Fri, 22 May 2020 17:40:59 -0500 Received: from DLEE113.ent.ti.com (157.170.170.24) by DLEE115.ent.ti.com (157.170.170.26) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Fri, 22 May 2020 17:40:59 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DLEE113.ent.ti.com (157.170.170.24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Fri, 22 May 2020 17:40:59 -0500 Received: from pratyush-OptiPlex-790.dhcp.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id 04MMeh5Z044559; Fri, 22 May 2020 17:40:54 -0500 From: Pratyush Yadav To: Tudor Ambarus , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , Mark Brown , Nicolas Ferre , Alexandre Belloni , Ludovic Desroches , Matthias Brugger , Michal Simek , , , , , Subject: [PATCH v8 02/19] spi: spi-mem: allow specifying a command's extension Date: Sat, 23 May 2020 04:10:25 +0530 Message-ID: <20200522224042.29970-3-p.yadav@ti.com> X-Mailer: git-send-email 2.25.0 In-Reply-To: <20200522224042.29970-1-p.yadav@ti.com> References: <20200522224042.29970-1-p.yadav@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200522_154106_345771_E6A37DD4 X-CRM114-Status: GOOD ( 20.00 ) X-Spam-Score: -2.5 (--) X-Spam-Report: SpamAssassin version 3.4.4 on bombadil.infradead.org summary: Content analysis details: (-2.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at https://www.dnswl.org/, medium trust [198.47.23.249 listed in list.dnswl.org] 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record -0.0 SPF_PASS SPF: sender matches SPF record -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.0 DKIMWL_WL_HIGH DKIMwl.org - Whitelisted High sender X-BeenThere: linux-mtd@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Mason Yang , Boris Brezillon , Sekhar Nori , Pratyush Yadav Sender: "linux-mtd" Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org In xSPI mode, flashes expect 2-byte opcodes. The second byte is called the "command extension". There can be 3 types of extensions in xSPI: repeat, invert, and hex. When the extension type is "repeat", the same opcode is sent twice. When it is "invert", the second byte is the inverse of the opcode. When it is "hex" an additional opcode byte based is sent with the command whose value can be anything. So, make opcode a 16-bit value and add a 'nbytes', similar to how multiple address widths are handled. Some places use sizeof(op->cmd.opcode). Replace them with op->cmd.nbytes The spi-mxic and spi-zynq-qspi drivers directly use op->cmd.opcode as a buffer. Now that opcode is a 2-byte field, this can result in different behaviour depending on if the machine is little endian or big endian. Extract the opcode in a local 1-byte variable and use that as the buffer instead. Both these drivers would reject multi-byte opcodes in their supports_op() hook anyway, so we only need to worry about single-byte opcodes for now. The above two changes are put in this commit to keep the series bisectable. Signed-off-by: Pratyush Yadav --- drivers/spi/spi-mem.c | 13 +++++++------ drivers/spi/spi-mtk-nor.c | 4 ++-- drivers/spi/spi-mxic.c | 3 ++- drivers/spi/spi-zynq-qspi.c | 11 ++++++----- include/linux/spi/spi-mem.h | 6 +++++- 5 files changed, 22 insertions(+), 15 deletions(-) diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c index 93e255287ab9..ef53290b7d24 100644 --- a/drivers/spi/spi-mem.c +++ b/drivers/spi/spi-mem.c @@ -159,6 +159,9 @@ bool spi_mem_default_supports_op(struct spi_mem *mem, if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr) return false; + if (op->cmd.nbytes != 1) + return false; + return true; } EXPORT_SYMBOL_GPL(spi_mem_default_supports_op); @@ -173,7 +176,7 @@ static bool spi_mem_buswidth_is_valid(u8 buswidth) static int spi_mem_check_op(const struct spi_mem_op *op) { - if (!op->cmd.buswidth) + if (!op->cmd.buswidth || !op->cmd.nbytes) return -EINVAL; if ((op->addr.nbytes && !op->addr.buswidth) || @@ -309,8 +312,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) return ret; } - tmpbufsize = sizeof(op->cmd.opcode) + op->addr.nbytes + - op->dummy.nbytes; + tmpbufsize = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes; /* * Allocate a buffer to transmit the CMD, ADDR cycles with kmalloc() so @@ -325,7 +327,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) tmpbuf[0] = op->cmd.opcode; xfers[xferpos].tx_buf = tmpbuf; - xfers[xferpos].len = sizeof(op->cmd.opcode); + xfers[xferpos].len = op->cmd.nbytes; xfers[xferpos].tx_nbits = op->cmd.buswidth; spi_message_add_tail(&xfers[xferpos], &msg); xferpos++; @@ -427,8 +429,7 @@ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) return ctlr->mem_ops->adjust_op_size(mem, op); if (!ctlr->mem_ops || !ctlr->mem_ops->exec_op) { - len = sizeof(op->cmd.opcode) + op->addr.nbytes + - op->dummy.nbytes; + len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes; if (len > spi_max_transfer_size(mem->spi)) return -EINVAL; diff --git a/drivers/spi/spi-mtk-nor.c b/drivers/spi/spi-mtk-nor.c index 7bc302b50396..d5f393871619 100644 --- a/drivers/spi/spi-mtk-nor.c +++ b/drivers/spi/spi-mtk-nor.c @@ -195,7 +195,7 @@ static int mtk_nor_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) } } - len = MTK_NOR_PRG_MAX_SIZE - sizeof(op->cmd.opcode) - op->addr.nbytes - + len = MTK_NOR_PRG_MAX_SIZE - op->cmd.nbytes - op->addr.nbytes - op->dummy.nbytes; if (op->data.nbytes > len) op->data.nbytes = len; @@ -219,7 +219,7 @@ static bool mtk_nor_supports_op(struct spi_mem *mem, (op->dummy.buswidth == 0) && (op->data.buswidth == 1); } - len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes; + len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes; if ((len > MTK_NOR_PRG_MAX_SIZE) || ((op->data.nbytes) && (len == MTK_NOR_PRG_MAX_SIZE))) return false; diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c index 69491f3a515d..4e4292f0ee1d 100644 --- a/drivers/spi/spi-mxic.c +++ b/drivers/spi/spi-mxic.c @@ -356,6 +356,7 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, int nio = 1, i, ret; u32 ss_ctrl; u8 addr[8]; + u8 opcode = op->cmd.opcode & 0xff; ret = mxic_spi_set_freq(mxic, mem->spi->max_speed_hz); if (ret) @@ -393,7 +394,7 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_ASSERT, mxic->regs + HC_CFG); - ret = mxic_spi_data_xfer(mxic, &op->cmd.opcode, NULL, 1); + ret = mxic_spi_data_xfer(mxic, &opcode, NULL, 1); if (ret) goto out; diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c index 17641157354d..41389856e14a 100644 --- a/drivers/spi/spi-zynq-qspi.c +++ b/drivers/spi/spi-zynq-qspi.c @@ -527,20 +527,21 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem, struct zynq_qspi *xqspi = spi_controller_get_devdata(mem->spi->master); int err = 0, i; u8 *tmpbuf; + u8 opcode = op->cmd.opcode & 0xff; dev_dbg(xqspi->dev, "cmd:%#x mode:%d.%d.%d.%d\n", - op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth, + opcode, op->cmd.buswidth, op->addr.buswidth, op->dummy.buswidth, op->data.buswidth); zynq_qspi_chipselect(mem->spi, true); zynq_qspi_config_op(xqspi, mem->spi); - if (op->cmd.opcode) { + if (opcode) { reinit_completion(&xqspi->data_completion); - xqspi->txbuf = (u8 *)&op->cmd.opcode; + xqspi->txbuf = &opcode; xqspi->rxbuf = NULL; - xqspi->tx_bytes = sizeof(op->cmd.opcode); - xqspi->rx_bytes = sizeof(op->cmd.opcode); + xqspi->tx_bytes = op->cmd.nbytes; + xqspi->rx_bytes = op->cmd.nbytes; zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true); zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET, ZYNQ_QSPI_IXR_RXTX_MASK); diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h index e3dcb956bf61..159463cc659c 100644 --- a/include/linux/spi/spi-mem.h +++ b/include/linux/spi/spi-mem.h @@ -17,6 +17,7 @@ { \ .buswidth = __buswidth, \ .opcode = __opcode, \ + .nbytes = 1, \ } #define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth) \ @@ -69,6 +70,8 @@ enum spi_mem_data_dir { /** * struct spi_mem_op - describes a SPI memory operation + * @cmd.nbytes: number of opcode bytes (only 1 or 2 are valid). The opcode is + * sent MSB-first. * @cmd.buswidth: number of IO lines used to transmit the command * @cmd.opcode: operation opcode * @cmd.dtr: whether the command opcode should be sent in DTR mode or not @@ -94,9 +97,10 @@ enum spi_mem_data_dir { */ struct spi_mem_op { struct { + u8 nbytes; u8 buswidth; u8 dtr : 1; - u8 opcode; + u16 opcode; } cmd; struct {