diff mbox series

[v7,3/6] mtd: spinand: micron: Add new Micron SPI NAND devices

Message ID 20200311175735.2007-4-sshivamurthy@micron.com
State Accepted
Headers show
Series Add new series Micron SPI NAND devices | expand

Commit Message

Shivamurthy Shastri March 11, 2020, 5:57 p.m. UTC 
From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add device table for M79A and M78A series Micron SPI NAND devices.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/spi/micron.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

Comments

Miquel Raynal March 12, 2020, 9:33 p.m. UTC | #1 
On Wed, 2020-03-11 at 17:57:32 UTC, shiva.linuxworks@gmail.com wrote:
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> Add device table for M79A and M78A series Micron SPI NAND devices.
> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel
diff mbox series

Patch

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 4727933c894b..26925714a9fb 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -102,6 +102,39 @@  static const struct spinand_info micron_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M79A 2Gb 1.8V */
+	SPINAND_INFO("MT29F2G01ABBGD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x25),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M78A 1Gb 3.3V */
+	SPINAND_INFO("MT29F1G01ABAFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x14),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M78A 1Gb 1.8V */
+	SPINAND_INFO("MT29F1G01ABAFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x15),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
 };
 
 static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {