@@ -43,6 +43,7 @@
#define NFC_REG_RCMD_SET 0x0028
#define NFC_REG_WCMD_SET 0x002C
#define NFC_REG_A10_IO_DATA 0x0030
+#define NFC_REG_A23_IO_DATA 0x0300
#define NFC_REG_ECC_CTL 0x0034
#define NFC_REG_ECC_ST 0x0038
#define NFC_REG_DEBUG 0x003C
@@ -50,6 +51,7 @@
#define NFC_REG_USER_DATA(x) (0x0050 + ((x) * 4))
#define NFC_REG_SPARE_AREA 0x00A0
#define NFC_REG_PAT_ID 0x00A4
+#define NFC_REG_MDMA_CNT 0x00C4
#define NFC_RAM0_BASE 0x0400
#define NFC_RAM1_BASE 0x0800
@@ -68,6 +70,7 @@
#define NFC_PAGE_SHIFT(x) (((x) < 10 ? 0 : (x) - 10) << 8)
#define NFC_SAM BIT(12)
#define NFC_RAM_METHOD BIT(14)
+#define NFC_DMA_TYPE_NORMAL BIT(15)
#define NFC_DEBUG_CTL BIT(31)
/* define bit use in NFC_ST */
@@ -204,10 +207,13 @@ static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand)
* NAND Controller capabilities structure: stores NAND controller capabilities
* for distinction between compatible strings.
*
+ * @extra_mbus_conf: Contrary to A10, A10s and A13, accessing internal RAM
+ * through MBUS on A23/A33 needs extra configuration.
* @reg_io_data: I/O data register
* @dma_maxburst: DMA maxburst
*/
struct sunxi_nfc_caps {
+ bool extra_mbus_conf;
unsigned int reg_io_data;
unsigned int dma_maxburst;
};
@@ -367,6 +373,9 @@ static int sunxi_nfc_dma_op_prepare(struct sunxi_nfc *nfc, const void *buf,
nfc->regs + NFC_REG_CTL);
writel(nchunks, nfc->regs + NFC_REG_SECTOR_NUM);
writel(chunksize, nfc->regs + NFC_REG_CNT);
+ if (nfc->caps->extra_mbus_conf)
+ writel(chunksize * nchunks, nfc->regs + NFC_REG_MDMA_CNT);
+
dmat = dmaengine_submit(dmad);
ret = dma_submit_error(dmat);
@@ -2127,6 +2136,11 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
dmac_cfg.src_maxburst = nfc->caps->dma_maxburst;
dmac_cfg.dst_maxburst = nfc->caps->dma_maxburst;
dmaengine_slave_config(nfc->dmac, &dmac_cfg);
+
+ if (nfc->caps->extra_mbus_conf)
+ writel(readl(nfc->regs + NFC_REG_CTL) |
+ NFC_DMA_TYPE_NORMAL, nfc->regs + NFC_REG_CTL);
+
} else {
dev_warn(dev, "failed to request rxtx DMA channel\n");
}
@@ -2175,11 +2189,21 @@ static const struct sunxi_nfc_caps sunxi_nfc_a10_caps = {
.dma_maxburst = 4,
};
+static const struct sunxi_nfc_caps sunxi_nfc_a23_caps = {
+ .extra_mbus_conf = true,
+ .reg_io_data = NFC_REG_A23_IO_DATA,
+ .dma_maxburst = 8,
+};
+
static const struct of_device_id sunxi_nfc_ids[] = {
{
.compatible = "allwinner,sun4i-a10-nand",
.data = &sunxi_nfc_a10_caps,
},
+ {
+ .compatible = "allwinner,sun8i-a23-nand-controller",
+ .data = &sunxi_nfc_a23_caps,
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sunxi_nfc_ids);
Allwinner NAND controllers can make use of DMA to enhance the I/O throughput thanks to ECC pipelining. DMA handling with A23/A33 NAND IP is a bit different than with the older SoCs, hence the introduction of a new compatible to handle: * the differences between register offsets, * the burst length change from 4 to minimum 8, * manage SRAM accesses through MBUS with extra configuration. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/mtd/nand/raw/sunxi_nand.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)