| Message ID | 20180801120429.62dfdb11@xps13 |
|---|---|
| State | Not Applicable |
| Delegated to: | Miquel Raynal |
| Headers | show |
| Series | mtd: nand: Changes for 4.19 | expand |
On Wed, 1 Aug 2018 12:04:29 +0200 Miquel Raynal <miquel.raynal@bootlin.com> wrote: > The following changes since commit 021c91791a5e7e85c567452f1be3e4c2c6cb6063: > > Linux 4.18-rc3 (2018-07-01 16:04:53 -0700) > > are available in the git repository at: > > git://git.infradead.org/linux-mtd.git tags/nand/for-4.19 > > for you to fetch changes up to ed128e8b757b4e759e5585df720888b30a7f2196: > > MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support (2018-08-01 09:46:09 +0200) PR merged in mtd/next. Thanks, Boris > > ---------------------------------------------------------------- > NAND core changes: > - Add the SPI-NAND framework. > - Create a helper to find the best ECC configuration. > - Create NAND controller operations. > - Allocate dynamically ONFI parameters structure. > - Add defines for ONFI version bits. > - Add manufacturer fixup for ONFI parameter page. > - Add an option to specify NAND chip as a boot device. > - Add Reed-Solomon error correction algorithm. > - Better name for the controller structure. > - Remove unused caller_is_module() definition. > - Make subop helpers return unsigned values. > - Expose _notsupp() helpers for raw page accessors. > - Add default values for dynamic timings. > - Kill the chip->scan_bbt() hook. > - Rename nand_default_bbt() into nand_create_bbt(). > - Start to clean the nand_chip structure. > - Remove stale prototype from rawnand.h. > > Raw NAND controllers drivers changes: > - Qcom: structuring cleanup. > - Denali: use core helper to find the best ECC configuration. > - Possible build of almost all drivers by adding a dependency on > COMPILE_TEST for almost all of them in Kconfig, implies various > fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even > changes in sparc64 and ia64 architectures. > - Clean the ->probe() functions error path of a lot of drivers. > - Migrate all drivers to use nand_scan() instead of > nand_scan_ident()/nand_scan_tail() pair. > - Use mtd_device_register() where applicable to simplify the code. > - Marvell: > * Handle on-die ECC. > * Better clocks handling. > * Remove bogus comment. > * Add suspend and resume support. > - Tegra: add NAND controller driver. > - Atmel: > * Add module param to avoid using dma. > * Drop Wenyou Yang from MAINTAINERS. > - Denali: optimize timings handling. > - FSMC: Stop using chip->read_buf(). > - FSL: > * Switch to SPDX license tag identifiers. > * Fix qualifiers in MXC init functions. > > Raw NAND chip drivers changes: > - Micron: > * Add fixup for ONFI revision. > * Update ecc_stats.corrected. > * Make ECC activation stateful. > * Avoid enabling/disabling ECC when it can't be disabled. > * Get the actual number of bitflips. > * Allow forced on-die ECC. > * Support 8/512 on-die ECC. > * Fix on-die ECC detection logic. > - Hynix: > * Fix decoding the OOB size on H27UCG8T2BTR. > * Use ->exec_op() in hynix_nand_reg_write_op(). > > ---------------------------------------------------------------- > Abhishek Sahu (15): > mtd: rawnand: helper function for setting up ECC configuration > mtd: rawnand: denali: use helper function for ecc setup > dt-bindings: qcom_nandc: update for ECC strength and step size > mtd: rawnand: qcom: remove dt property nand-ecc-step-size > mtd: rawnand: qcom: use the ecc strength from device parameter > mtd: rawnand: qcom: wait for desc completion in all BAM channels > mtd: rawnand: qcom: erased page detection for uncorrectable errors only > mtd: rawnand: qcom: fix null pointer access for erased page detection > mtd: rawnand: qcom: parse read errors for read oob also > mtd: rawnand: qcom: modify write_oob to remove read codeword part > mtd: rawnand: qcom: fix return value for raw page read > mtd: rawnand: qcom: check for operation errors in case of raw read > mtd: rawnand: qcom: code reorganization for raw read > mtd: rawnand: provide only single helper function for ECC conf > mtd: rawnand: qcom: erased page bitflips detection > > Anders Roxell (1): > drivers/memory/Kconfig: Add CONFIG_OF dependency > > Arnd Bergmann (4): > mtd: rawnand: MTD_NAND_BCM47XXNFLASH needs CONFIG_BCMA > mtd: rawnand: qcom: stop using phys_to_dma() > ia64: use asm-generic/io.h > sparc64: add reads{b,w,l}/writes{b,w,l} > > Boris Brezillon (60): > mtd: rawnand: micron: Update ecc_stats.corrected > dt-bindings: Add bindings for SPI NAND devices > mtd: spinand: Add initial support for the MX35LF1GE4AB chip > mtd: rawnand: gpmi: Remove useless dependency on MTD_NAND > mtd: rawnand: Add 'depends on HAS_IOMEM' where missing > mtd: rawnand: omap2: Allow selection of this driver when COMPILE_TEST=y > mtd: rawnand: sharpsl: Remove inclusion of mach and asm headers > mtd: rawnand: sharpsl: Allow selection of this driver when COMPILE_TEST=y > mtd: rawnand: lpc32xx: Allow selection of these drivers when COMPILE_TEST=y > mtd: rawnand: brcmnand: Allow selection of this driver when COMPILE_TEST=y > mtd: rawnand: mxc: Avoid inclusion of asm/mach headers > mtd: rawnand: mxc: Allow selection of this driver when COMPILE_TEST=y > mtd: rawnand: qcom: Allow selection of this driver when COMPILE_TEST=y > mtd: rawnand: nuc900: Allow selection of this driver when COMPILE_TEST=y > bcma: Allow selection of this driver when COMPILE_TEST=y > mtd: rawnand: Kill cafe_nand_bug() > mtd: rawnand: Remove nand_do_read() prototype from rawnand.h > mtd: rawnand: Remove forward declaration of mtd_info > mtd: rawnand: Remove forward declaration of device_node > mtd: rawnand: Rename nand_default_bbt() into nand_create_bbt() > mtd: rawnand: Kill the chip->scan_bbt() hook > mtd: rawnand: orion_nand: Kill orion_nand_data.dev_ready() > mtd: rawnand: plat_nand: Kill pdata->ctrl.{hwcontrol, read_byte}() > mtd: rawnand: hynix: Use ->exec_op() in hynix_nand_reg_write_op() > mtd: rawnand: atmel: Use uintptr_t casts instead of unsigned int > mtd: rawnand: atmel: Add an __iomem cast on gen_pool_dma_alloc() call > mtd: rawnand: atmel: Allow selection of this driver when COMPILE_TEST=y > mtd: rawnand: davinci: Stop doing iomem pointer <-> u32 conversions > mtd: rawnand: davinci: Use uintptr_t casts instead of unsigned ones > mtd: rawnand: davinci: Allow selection of this driver when COMPILE_TEST=y > mtd: rawnand: sunxi: Add an U suffix to NFC_PAGE_OP definition > mtd: rawnand: sunxi: Make sure ret is initialized in sunxi_nfc_read_byte() > mtd: rawnand: sunxi: Allow selection of this driver when COMPILE_TEST=y > mtd: rawnand: fscm: Avoid collision on PC def when compiling for MIPS > mtd: rawnand: fsmc: Use uintptr_t casts instead of unsigned ones > mtd: rawnand: fsmc: Allow selection of this driver when COMPILE_TEST=y > memory: fsl_ifc: Allow selection of this driver when COMPILE_TEST=y > mtd: rawnand: fsl_ifc: Add an __iomem specifier on eccstat_regs > mtd: rawnand: fsl_ifc: Allow selection of this driver when COMPILE_TEST=y > MIPS: txx9: Move the ndfc.h header to include/linux/platform_data/txx9 > mtd: rawnand: txx9ndfmc: Allow selection of this driver when COMPILE_TEST=y > MIPS: jz4740: Move jz4740_nand.h header to include/linux/platform_data/jz4740 > mtd: rawnand: jz4740: Allow selection of this driver when COMPILE_TEST=y > mtd: rawnand: jz4780: Drop the dependency on MACH_JZ4780 > mtd: rawnand: jz4740: Use the proper format specifier to print chipnr > memory: jz4780-nemc: Allow selection of this driver when COMPILE_TEST=y > mtd: rawnand: fsmc: Stop using chip->read_buf() > mtd: rawnand: micron: Fix on-die ECC detection logic > mtd: rawnand: Expose _notsupp() helpers for raw page accessors > mtd: rawnand: micron: Get the actual number of bitflips > mtd: rawnand: micron: Avoid enabling/disabling ECC when it can't be disabled > mtd: rawnand: micron: Make ECC activation stateful > mtd: rawnand: orion: Avoid direct inclusion of asm headers > mtd: rawnand: orion: Handle cases where __LINUX_ARM_ARCH__ is not defined > mtd: rawnand: s3c2410: Error out when ->nrsets < 0 or ->sets == NULL > mtd: rawnand: Remove unused caller_is_module() definition > mtd: rawnand: jz4740: Include gpio/consumer.h instead of gpio.h > mtd: rawnand: sunxi: Remove gpio.h and of_gpio.h inclusions > mtd: rawnand: atmel: Stop including gpio.h > mtd: rawnand: au1550nd: Remove unneeded gpio.h inclusion > > Chris Packham (6): > mtd: rawnand: marvell: Handle on-die ECC > mtd: rawnand: add manufacturer fixup for ONFI parameter page > mtd: rawnand: add defines for ONFI version bits > mtd: rawnand: micron: add fixup for ONFI revision > mtd: rawnand: micron: support 8/512 on-die ECC > mtd: rawnand: micron: allow forced on-die ECC > > Colin Ian King (1): > mtd: rawnand: gpmi: remove redundant variable payload_virt > > Daniel Mack (3): > mtd: rawnand: marvell: add suspend and resume hooks > mtd: rawnand: marvell: remove bogus comment in marvell_nfc_select_chip() > mtd: rawnand: marvell: set reg_clk to NULL if it can't be obtained > > Fabio Estevam (2): > mtd: rawnand: gpmi: Switch to SPDX identifier > mtd: rawnand: mxc: Switch to SPDX identifier > > Frieder Schrempf (1): > mtd: spinand: Add initial support for Winbond W25M02GV > > Martin Blumenstingl (1): > mtd: rawnand: hynix: fix decoding the OOB size on H27UCG8T2BTR > > Martin Kaiser (1): > mtd: rawnand: mxc: remove __init qualifier from mxcnd_probe_dt > > Masahiro Yamada (4): > mtd: rawnand: denali_dt: use dev as a shorthand of &pdev->dev > dt-binding: mtd: denali_dt: document clock property > mtd: rawnand: denali_dt: add more clocks based on IP datasheet > mtd: rawnand: denali: optimize timing parameters for data interface > > Miquel Raynal (48): > mtd: spinand: macronix: Add support for MX35LF2GE4AB > mtd: rawnand: docg4: fix the probe function error path > mtd: rawnand: fix indentation in Kconfig > mtd: rawnand: add default values for dynamic timings > mtd: rawnand: make subop helpers return unsigned values > mtd: rawnand: better name for the controller structure > mtd: rawnand: add hooks that may be called during nand_scan() > mtd: rawnand: davinci: convert driver to nand_scan() > mtd: rawnand: denali: convert to nand_scan() > mtd: rawnand: fsl_elbc: return meaningful values > mtd: rawnand: fsl_elbc: convert driver to nand_scan() > mtd: rawnand: fsl_ifc: convert driver to nand_scan() > mtd: rawnand: fsmc: convert driver to nand_scan() > mtd: rawnand: gpmi: convert driver to nand_scan() > mtd: rawnand: hisi504: convert driver to nand_scan() > mtd: rawnand: jz4780: convert driver to nand_scan() > mtd: rawnand: lpc32xx_slc: convert driver to nand_scan() > mtd: rawnand: marvell: convert driver to nand_scan() > mtd: rawnand: mtk: convert driver to nand_scan() > mtd: rawnand: mxc: convert driver to nand_scan() > mtd: rawnand: nandsim: convert driver to nand_scan() > mtd: rawnand: s3c2410: convert driver to nand_scan() > mtd: rawnand: sh_flctl: convert driver to nand_scan() > mtd: rawnand: sunxi: convert driver to nand_scan() > mtd: rawnand: tango: convert driver to nand_scan() > mtd: rawnand: txx9ndfmc: rename nand controller internal structure > mtd: rawnand: vf610: convert driver to nand_scan() > mtd: rawnand: sm_common: fix the probe function error path > mtd: rawnand: sm_common: convert driver to nand_scan_with_ids() > mtd: rawnand: qcom: convert driver to nand_scan() > mtd: rawnand: brcmnand: convert driver to nand_scan() > mtd: rawnand: cafe: convert driver to nand_scan() > mtd: rawnand: lpc32xx_mlc: convert driver to nand_scan() > mtd: rawnand: omap2: convert driver to nand_scan() > mtd: rawnand: atmel: clarify NAND addition/removal paths > mtd: rawnand: atmel: convert driver to nand_scan() > mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero > mtd: rawnand: docg4: convert driver to nand_scan() > mtd: rawnand: jz4740: fix probe function error path > mtd: rawnand: jz4740: group nand_scan_{ident, tail} calls > mtd: rawnand: jz4740: convert driver to nand_scan() > mtd: rawnand: tegra: convert driver to nand_scan() > mtd: rawnand: txx9ndfmc: clarify ECC parameters assignation > mtd: rawnand: txx9ndfmc: convert driver to nand_scan() > mtd: rawnand: do not export nand_scan_[ident|tail]() anymore > mtd: rawnand: allocate model parameter dynamically > mtd: rawnand: allocate dynamically ONFI parameters during detection > MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support > > Peter Pan (2): > mtd: nand: Add core infrastructure to support SPI NANDs > mtd: spinand: Add initial support for Micron MT29F2G01ABAGD > > Peter Rosin (1): > mtd: rawnand: atmel: add module param to avoid using dma > > Rafał Miłecki (2): > mtd: rawnand: use mtd_device_register() where applicable > mtd: onenand: use mtd_device_register() where applicable > > Stefan Agner (5): > mtd: rawnand: add Reed-Solomon error correction algorithm > mtd: rawnand: add an option to specify NAND chip as a boot device > dt-bindings: mtd: add tegra NAND controller binding > mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver > mtd: rawnand: tegra: check bounds of die_nr properly > > .../devicetree/bindings/mtd/denali-nand.txt | 5 + > Documentation/devicetree/bindings/mtd/nand.txt | 6 +- > .../bindings/mtd/nvidia-tegra20-nand.txt | 64 + > .../devicetree/bindings/mtd/qcom_nandc.txt | 7 +- > Documentation/devicetree/bindings/mtd/spi-nand.txt | 5 + > MAINTAINERS | 8 +- > arch/arm/mach-pxa/balloon3.c | 1 - > arch/arm/mach-pxa/em-x270.c | 1 - > arch/ia64/include/asm/io.h | 13 +- > arch/mips/jz4740/board-qi_lb60.c | 3 +- > arch/mips/txx9/generic/setup.c | 2 +- > arch/mips/txx9/generic/setup_tx4938.c | 2 +- > arch/mips/txx9/generic/setup_tx4939.c | 2 +- > arch/sparc/include/asm/io_64.h | 19 +- > drivers/bcma/Kconfig | 3 +- > drivers/memory/Kconfig | 6 +- > drivers/mtd/nand/Kconfig | 1 + > drivers/mtd/nand/Makefile | 1 + > drivers/mtd/nand/onenand/generic.c | 5 +- > drivers/mtd/nand/onenand/samsung.c | 5 +- > drivers/mtd/nand/raw/Kconfig | 152 ++- > drivers/mtd/nand/raw/Makefile | 1 + > drivers/mtd/nand/raw/atmel/nand-controller.c | 175 ++- > drivers/mtd/nand/raw/au1550nd.c | 1 - > drivers/mtd/nand/raw/brcmnand/brcmnand.c | 67 +- > drivers/mtd/nand/raw/cafe_nand.c | 143 ++- > drivers/mtd/nand/raw/cmx270_nand.c | 4 +- > drivers/mtd/nand/raw/cs553x_nand.c | 3 +- > drivers/mtd/nand/raw/davinci_nand.c | 231 ++-- > drivers/mtd/nand/raw/denali.c | 216 ++-- > drivers/mtd/nand/raw/denali.h | 1 + > drivers/mtd/nand/raw/denali_dt.c | 72 +- > drivers/mtd/nand/raw/denali_pci.c | 1 + > drivers/mtd/nand/raw/diskonchip.c | 4 +- > drivers/mtd/nand/raw/docg4.c | 89 +- > drivers/mtd/nand/raw/fsl_elbc_nand.c | 25 +- > drivers/mtd/nand/raw/fsl_ifc_nand.c | 25 +- > drivers/mtd/nand/raw/fsmc_nand.c | 183 +-- > drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c | 15 +- > drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 76 +- > drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h | 11 +- > drivers/mtd/nand/raw/hisi504_nand.c | 78 +- > drivers/mtd/nand/raw/jz4740_nand.c | 51 +- > drivers/mtd/nand/raw/jz4780_nand.c | 41 +- > drivers/mtd/nand/raw/lpc32xx_mlc.c | 61 +- > drivers/mtd/nand/raw/lpc32xx_slc.c | 77 +- > drivers/mtd/nand/raw/marvell_nand.c | 302 +++-- > drivers/mtd/nand/raw/mtk_nand.c | 79 +- > drivers/mtd/nand/raw/mxc_nand.c | 157 ++- > drivers/mtd/nand/raw/nand_base.c | 343 ++++-- > drivers/mtd/nand/raw/nand_bbt.c | 10 +- > drivers/mtd/nand/raw/nand_hynix.c | 23 + > drivers/mtd/nand/raw/nand_micron.c | 351 +++++- > drivers/mtd/nand/raw/nand_timings.c | 32 +- > drivers/mtd/nand/raw/nandsim.c | 84 +- > drivers/mtd/nand/raw/ndfc.c | 4 +- > drivers/mtd/nand/raw/omap2.c | 533 +++++---- > drivers/mtd/nand/raw/orion_nand.c | 9 +- > drivers/mtd/nand/raw/oxnas_nand.c | 4 +- > drivers/mtd/nand/raw/plat_nand.c | 2 - > drivers/mtd/nand/raw/qcom_nandc.c | 595 ++++++---- > drivers/mtd/nand/raw/s3c2410.c | 52 +- > drivers/mtd/nand/raw/sh_flctl.c | 36 +- > drivers/mtd/nand/raw/sharpsl.c | 5 +- > drivers/mtd/nand/raw/sm_common.c | 39 +- > drivers/mtd/nand/raw/sunxi_nand.c | 55 +- > drivers/mtd/nand/raw/tango_nand.c | 44 +- > drivers/mtd/nand/raw/tegra_nand.c | 1246 ++++++++++++++++++++ > drivers/mtd/nand/raw/txx9ndfmc.c | 42 +- > drivers/mtd/nand/raw/vf610_nfc.c | 127 +- > drivers/mtd/nand/spi/Kconfig | 7 + > drivers/mtd/nand/spi/Makefile | 3 + > drivers/mtd/nand/spi/core.c | 1155 ++++++++++++++++++ > drivers/mtd/nand/spi/macronix.c | 144 +++ > drivers/mtd/nand/spi/micron.c | 133 +++ > drivers/mtd/nand/spi/winbond.c | 141 +++ > include/linux/mtd/rawnand.h | 126 +- > include/linux/mtd/spinand.h | 421 +++++++ > .../linux/platform_data/jz4740}/jz4740_nand.h | 4 +- > include/linux/platform_data/mtd-orion_nand.h | 1 - > .../linux/platform_data}/txx9/ndfmc.h | 6 +- > include/linux/spi/spi-mem.h | 4 +- > 82 files changed, 6200 insertions(+), 2081 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt > create mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.txt > create mode 100644 drivers/mtd/nand/raw/tegra_nand.c > create mode 100644 drivers/mtd/nand/spi/Kconfig > create mode 100644 drivers/mtd/nand/spi/Makefile > create mode 100644 drivers/mtd/nand/spi/core.c > create mode 100644 drivers/mtd/nand/spi/macronix.c > create mode 100644 drivers/mtd/nand/spi/micron.c > create mode 100644 drivers/mtd/nand/spi/winbond.c > create mode 100644 include/linux/mtd/spinand.h > rename {arch/mips/include/asm/mach-jz4740 => include/linux/platform_data/jz4740}/jz4740_nand.h (91%) > rename {arch/mips/include/asm => include/linux/platform_data}/txx9/ndfmc.h (91%) > > ______________________________________________________ > Linux MTD discussion mailing list > http://lists.infradead.org/mailman/listinfo/linux-mtd/
The following changes since commit 021c91791a5e7e85c567452f1be3e4c2c6cb6063: Linux 4.18-rc3 (2018-07-01 16:04:53 -0700) are available in the git repository at: git://git.infradead.org/linux-mtd.git tags/nand/for-4.19 for you to fetch changes up to ed128e8b757b4e759e5585df720888b30a7f2196: MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support (2018-08-01 09:46:09 +0200) ---------------------------------------------------------------- NAND core changes: - Add the SPI-NAND framework. - Create a helper to find the best ECC configuration. - Create NAND controller operations. - Allocate dynamically ONFI parameters structure. - Add defines for ONFI version bits. - Add manufacturer fixup for ONFI parameter page. - Add an option to specify NAND chip as a boot device. - Add Reed-Solomon error correction algorithm. - Better name for the controller structure. - Remove unused caller_is_module() definition. - Make subop helpers return unsigned values. - Expose _notsupp() helpers for raw page accessors. - Add default values for dynamic timings. - Kill the chip->scan_bbt() hook. - Rename nand_default_bbt() into nand_create_bbt(). - Start to clean the nand_chip structure. - Remove stale prototype from rawnand.h. Raw NAND controllers drivers changes: - Qcom: structuring cleanup. - Denali: use core helper to find the best ECC configuration. - Possible build of almost all drivers by adding a dependency on COMPILE_TEST for almost all of them in Kconfig, implies various fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even changes in sparc64 and ia64 architectures. - Clean the ->probe() functions error path of a lot of drivers. - Migrate all drivers to use nand_scan() instead of nand_scan_ident()/nand_scan_tail() pair. - Use mtd_device_register() where applicable to simplify the code. - Marvell: * Handle on-die ECC. * Better clocks handling. * Remove bogus comment. * Add suspend and resume support. - Tegra: add NAND controller driver. - Atmel: * Add module param to avoid using dma. * Drop Wenyou Yang from MAINTAINERS. - Denali: optimize timings handling. - FSMC: Stop using chip->read_buf(). - FSL: * Switch to SPDX license tag identifiers. * Fix qualifiers in MXC init functions. Raw NAND chip drivers changes: - Micron: * Add fixup for ONFI revision. * Update ecc_stats.corrected. * Make ECC activation stateful. * Avoid enabling/disabling ECC when it can't be disabled. * Get the actual number of bitflips. * Allow forced on-die ECC. * Support 8/512 on-die ECC. * Fix on-die ECC detection logic. - Hynix: * Fix decoding the OOB size on H27UCG8T2BTR. * Use ->exec_op() in hynix_nand_reg_write_op(). ---------------------------------------------------------------- Abhishek Sahu (15): mtd: rawnand: helper function for setting up ECC configuration mtd: rawnand: denali: use helper function for ecc setup dt-bindings: qcom_nandc: update for ECC strength and step size mtd: rawnand: qcom: remove dt property nand-ecc-step-size mtd: rawnand: qcom: use the ecc strength from device parameter mtd: rawnand: qcom: wait for desc completion in all BAM channels mtd: rawnand: qcom: erased page detection for uncorrectable errors only mtd: rawnand: qcom: fix null pointer access for erased page detection mtd: rawnand: qcom: parse read errors for read oob also mtd: rawnand: qcom: modify write_oob to remove read codeword part mtd: rawnand: qcom: fix return value for raw page read mtd: rawnand: qcom: check for operation errors in case of raw read mtd: rawnand: qcom: code reorganization for raw read mtd: rawnand: provide only single helper function for ECC conf mtd: rawnand: qcom: erased page bitflips detection Anders Roxell (1): drivers/memory/Kconfig: Add CONFIG_OF dependency Arnd Bergmann (4): mtd: rawnand: MTD_NAND_BCM47XXNFLASH needs CONFIG_BCMA mtd: rawnand: qcom: stop using phys_to_dma() ia64: use asm-generic/io.h sparc64: add reads{b,w,l}/writes{b,w,l} Boris Brezillon (60): mtd: rawnand: micron: Update ecc_stats.corrected dt-bindings: Add bindings for SPI NAND devices mtd: spinand: Add initial support for the MX35LF1GE4AB chip mtd: rawnand: gpmi: Remove useless dependency on MTD_NAND mtd: rawnand: Add 'depends on HAS_IOMEM' where missing mtd: rawnand: omap2: Allow selection of this driver when COMPILE_TEST=y mtd: rawnand: sharpsl: Remove inclusion of mach and asm headers mtd: rawnand: sharpsl: Allow selection of this driver when COMPILE_TEST=y mtd: rawnand: lpc32xx: Allow selection of these drivers when COMPILE_TEST=y mtd: rawnand: brcmnand: Allow selection of this driver when COMPILE_TEST=y mtd: rawnand: mxc: Avoid inclusion of asm/mach headers mtd: rawnand: mxc: Allow selection of this driver when COMPILE_TEST=y mtd: rawnand: qcom: Allow selection of this driver when COMPILE_TEST=y mtd: rawnand: nuc900: Allow selection of this driver when COMPILE_TEST=y bcma: Allow selection of this driver when COMPILE_TEST=y mtd: rawnand: Kill cafe_nand_bug() mtd: rawnand: Remove nand_do_read() prototype from rawnand.h mtd: rawnand: Remove forward declaration of mtd_info mtd: rawnand: Remove forward declaration of device_node mtd: rawnand: Rename nand_default_bbt() into nand_create_bbt() mtd: rawnand: Kill the chip->scan_bbt() hook mtd: rawnand: orion_nand: Kill orion_nand_data.dev_ready() mtd: rawnand: plat_nand: Kill pdata->ctrl.{hwcontrol, read_byte}() mtd: rawnand: hynix: Use ->exec_op() in hynix_nand_reg_write_op() mtd: rawnand: atmel: Use uintptr_t casts instead of unsigned int mtd: rawnand: atmel: Add an __iomem cast on gen_pool_dma_alloc() call mtd: rawnand: atmel: Allow selection of this driver when COMPILE_TEST=y mtd: rawnand: davinci: Stop doing iomem pointer <-> u32 conversions mtd: rawnand: davinci: Use uintptr_t casts instead of unsigned ones mtd: rawnand: davinci: Allow selection of this driver when COMPILE_TEST=y mtd: rawnand: sunxi: Add an U suffix to NFC_PAGE_OP definition mtd: rawnand: sunxi: Make sure ret is initialized in sunxi_nfc_read_byte() mtd: rawnand: sunxi: Allow selection of this driver when COMPILE_TEST=y mtd: rawnand: fscm: Avoid collision on PC def when compiling for MIPS mtd: rawnand: fsmc: Use uintptr_t casts instead of unsigned ones mtd: rawnand: fsmc: Allow selection of this driver when COMPILE_TEST=y memory: fsl_ifc: Allow selection of this driver when COMPILE_TEST=y mtd: rawnand: fsl_ifc: Add an __iomem specifier on eccstat_regs mtd: rawnand: fsl_ifc: Allow selection of this driver when COMPILE_TEST=y MIPS: txx9: Move the ndfc.h header to include/linux/platform_data/txx9 mtd: rawnand: txx9ndfmc: Allow selection of this driver when COMPILE_TEST=y MIPS: jz4740: Move jz4740_nand.h header to include/linux/platform_data/jz4740 mtd: rawnand: jz4740: Allow selection of this driver when COMPILE_TEST=y mtd: rawnand: jz4780: Drop the dependency on MACH_JZ4780 mtd: rawnand: jz4740: Use the proper format specifier to print chipnr memory: jz4780-nemc: Allow selection of this driver when COMPILE_TEST=y mtd: rawnand: fsmc: Stop using chip->read_buf() mtd: rawnand: micron: Fix on-die ECC detection logic mtd: rawnand: Expose _notsupp() helpers for raw page accessors mtd: rawnand: micron: Get the actual number of bitflips mtd: rawnand: micron: Avoid enabling/disabling ECC when it can't be disabled mtd: rawnand: micron: Make ECC activation stateful mtd: rawnand: orion: Avoid direct inclusion of asm headers mtd: rawnand: orion: Handle cases where __LINUX_ARM_ARCH__ is not defined mtd: rawnand: s3c2410: Error out when ->nrsets < 0 or ->sets == NULL mtd: rawnand: Remove unused caller_is_module() definition mtd: rawnand: jz4740: Include gpio/consumer.h instead of gpio.h mtd: rawnand: sunxi: Remove gpio.h and of_gpio.h inclusions mtd: rawnand: atmel: Stop including gpio.h mtd: rawnand: au1550nd: Remove unneeded gpio.h inclusion Chris Packham (6): mtd: rawnand: marvell: Handle on-die ECC mtd: rawnand: add manufacturer fixup for ONFI parameter page mtd: rawnand: add defines for ONFI version bits mtd: rawnand: micron: add fixup for ONFI revision mtd: rawnand: micron: support 8/512 on-die ECC mtd: rawnand: micron: allow forced on-die ECC Colin Ian King (1): mtd: rawnand: gpmi: remove redundant variable payload_virt Daniel Mack (3): mtd: rawnand: marvell: add suspend and resume hooks mtd: rawnand: marvell: remove bogus comment in marvell_nfc_select_chip() mtd: rawnand: marvell: set reg_clk to NULL if it can't be obtained Fabio Estevam (2): mtd: rawnand: gpmi: Switch to SPDX identifier mtd: rawnand: mxc: Switch to SPDX identifier Frieder Schrempf (1): mtd: spinand: Add initial support for Winbond W25M02GV Martin Blumenstingl (1): mtd: rawnand: hynix: fix decoding the OOB size on H27UCG8T2BTR Martin Kaiser (1): mtd: rawnand: mxc: remove __init qualifier from mxcnd_probe_dt Masahiro Yamada (4): mtd: rawnand: denali_dt: use dev as a shorthand of &pdev->dev dt-binding: mtd: denali_dt: document clock property mtd: rawnand: denali_dt: add more clocks based on IP datasheet mtd: rawnand: denali: optimize timing parameters for data interface Miquel Raynal (48): mtd: spinand: macronix: Add support for MX35LF2GE4AB mtd: rawnand: docg4: fix the probe function error path mtd: rawnand: fix indentation in Kconfig mtd: rawnand: add default values for dynamic timings mtd: rawnand: make subop helpers return unsigned values mtd: rawnand: better name for the controller structure mtd: rawnand: add hooks that may be called during nand_scan() mtd: rawnand: davinci: convert driver to nand_scan() mtd: rawnand: denali: convert to nand_scan() mtd: rawnand: fsl_elbc: return meaningful values mtd: rawnand: fsl_elbc: convert driver to nand_scan() mtd: rawnand: fsl_ifc: convert driver to nand_scan() mtd: rawnand: fsmc: convert driver to nand_scan() mtd: rawnand: gpmi: convert driver to nand_scan() mtd: rawnand: hisi504: convert driver to nand_scan() mtd: rawnand: jz4780: convert driver to nand_scan() mtd: rawnand: lpc32xx_slc: convert driver to nand_scan() mtd: rawnand: marvell: convert driver to nand_scan() mtd: rawnand: mtk: convert driver to nand_scan() mtd: rawnand: mxc: convert driver to nand_scan() mtd: rawnand: nandsim: convert driver to nand_scan() mtd: rawnand: s3c2410: convert driver to nand_scan() mtd: rawnand: sh_flctl: convert driver to nand_scan() mtd: rawnand: sunxi: convert driver to nand_scan() mtd: rawnand: tango: convert driver to nand_scan() mtd: rawnand: txx9ndfmc: rename nand controller internal structure mtd: rawnand: vf610: convert driver to nand_scan() mtd: rawnand: sm_common: fix the probe function error path mtd: rawnand: sm_common: convert driver to nand_scan_with_ids() mtd: rawnand: qcom: convert driver to nand_scan() mtd: rawnand: brcmnand: convert driver to nand_scan() mtd: rawnand: cafe: convert driver to nand_scan() mtd: rawnand: lpc32xx_mlc: convert driver to nand_scan() mtd: rawnand: omap2: convert driver to nand_scan() mtd: rawnand: atmel: clarify NAND addition/removal paths mtd: rawnand: atmel: convert driver to nand_scan() mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero mtd: rawnand: docg4: convert driver to nand_scan() mtd: rawnand: jz4740: fix probe function error path mtd: rawnand: jz4740: group nand_scan_{ident, tail} calls mtd: rawnand: jz4740: convert driver to nand_scan() mtd: rawnand: tegra: convert driver to nand_scan() mtd: rawnand: txx9ndfmc: clarify ECC parameters assignation mtd: rawnand: txx9ndfmc: convert driver to nand_scan() mtd: rawnand: do not export nand_scan_[ident|tail]() anymore mtd: rawnand: allocate model parameter dynamically mtd: rawnand: allocate dynamically ONFI parameters during detection MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support Peter Pan (2): mtd: nand: Add core infrastructure to support SPI NANDs mtd: spinand: Add initial support for Micron MT29F2G01ABAGD Peter Rosin (1): mtd: rawnand: atmel: add module param to avoid using dma Rafał Miłecki (2): mtd: rawnand: use mtd_device_register() where applicable mtd: onenand: use mtd_device_register() where applicable Stefan Agner (5): mtd: rawnand: add Reed-Solomon error correction algorithm mtd: rawnand: add an option to specify NAND chip as a boot device dt-bindings: mtd: add tegra NAND controller binding mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver mtd: rawnand: tegra: check bounds of die_nr properly .../devicetree/bindings/mtd/denali-nand.txt | 5 + Documentation/devicetree/bindings/mtd/nand.txt | 6 +- .../bindings/mtd/nvidia-tegra20-nand.txt | 64 + .../devicetree/bindings/mtd/qcom_nandc.txt | 7 +- Documentation/devicetree/bindings/mtd/spi-nand.txt | 5 + MAINTAINERS | 8 +- arch/arm/mach-pxa/balloon3.c | 1 - arch/arm/mach-pxa/em-x270.c | 1 - arch/ia64/include/asm/io.h | 13 +- arch/mips/jz4740/board-qi_lb60.c | 3 +- arch/mips/txx9/generic/setup.c | 2 +- arch/mips/txx9/generic/setup_tx4938.c | 2 +- arch/mips/txx9/generic/setup_tx4939.c | 2 +- arch/sparc/include/asm/io_64.h | 19 +- drivers/bcma/Kconfig | 3 +- drivers/memory/Kconfig | 6 +- drivers/mtd/nand/Kconfig | 1 + drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/onenand/generic.c | 5 +- drivers/mtd/nand/onenand/samsung.c | 5 +- drivers/mtd/nand/raw/Kconfig | 152 ++- drivers/mtd/nand/raw/Makefile | 1 + drivers/mtd/nand/raw/atmel/nand-controller.c | 175 ++- drivers/mtd/nand/raw/au1550nd.c | 1 - drivers/mtd/nand/raw/brcmnand/brcmnand.c | 67 +- drivers/mtd/nand/raw/cafe_nand.c | 143 ++- drivers/mtd/nand/raw/cmx270_nand.c | 4 +- drivers/mtd/nand/raw/cs553x_nand.c | 3 +- drivers/mtd/nand/raw/davinci_nand.c | 231 ++-- drivers/mtd/nand/raw/denali.c | 216 ++-- drivers/mtd/nand/raw/denali.h | 1 + drivers/mtd/nand/raw/denali_dt.c | 72 +- drivers/mtd/nand/raw/denali_pci.c | 1 + drivers/mtd/nand/raw/diskonchip.c | 4 +- drivers/mtd/nand/raw/docg4.c | 89 +- drivers/mtd/nand/raw/fsl_elbc_nand.c | 25 +- drivers/mtd/nand/raw/fsl_ifc_nand.c | 25 +- drivers/mtd/nand/raw/fsmc_nand.c | 183 +-- drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c | 15 +- drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 76 +- drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h | 11 +- drivers/mtd/nand/raw/hisi504_nand.c | 78 +- drivers/mtd/nand/raw/jz4740_nand.c | 51 +- drivers/mtd/nand/raw/jz4780_nand.c | 41 +- drivers/mtd/nand/raw/lpc32xx_mlc.c | 61 +- drivers/mtd/nand/raw/lpc32xx_slc.c | 77 +- drivers/mtd/nand/raw/marvell_nand.c | 302 +++-- drivers/mtd/nand/raw/mtk_nand.c | 79 +- drivers/mtd/nand/raw/mxc_nand.c | 157 ++- drivers/mtd/nand/raw/nand_base.c | 343 ++++-- drivers/mtd/nand/raw/nand_bbt.c | 10 +- drivers/mtd/nand/raw/nand_hynix.c | 23 + drivers/mtd/nand/raw/nand_micron.c | 351 +++++- drivers/mtd/nand/raw/nand_timings.c | 32 +- drivers/mtd/nand/raw/nandsim.c | 84 +- drivers/mtd/nand/raw/ndfc.c | 4 +- drivers/mtd/nand/raw/omap2.c | 533 +++++---- drivers/mtd/nand/raw/orion_nand.c | 9 +- drivers/mtd/nand/raw/oxnas_nand.c | 4 +- drivers/mtd/nand/raw/plat_nand.c | 2 - drivers/mtd/nand/raw/qcom_nandc.c | 595 ++++++---- drivers/mtd/nand/raw/s3c2410.c | 52 +- drivers/mtd/nand/raw/sh_flctl.c | 36 +- drivers/mtd/nand/raw/sharpsl.c | 5 +- drivers/mtd/nand/raw/sm_common.c | 39 +- drivers/mtd/nand/raw/sunxi_nand.c | 55 +- drivers/mtd/nand/raw/tango_nand.c | 44 +- drivers/mtd/nand/raw/tegra_nand.c | 1246 ++++++++++++++++++++ drivers/mtd/nand/raw/txx9ndfmc.c | 42 +- drivers/mtd/nand/raw/vf610_nfc.c | 127 +- drivers/mtd/nand/spi/Kconfig | 7 + drivers/mtd/nand/spi/Makefile | 3 + drivers/mtd/nand/spi/core.c | 1155 ++++++++++++++++++ drivers/mtd/nand/spi/macronix.c | 144 +++ drivers/mtd/nand/spi/micron.c | 133 +++ drivers/mtd/nand/spi/winbond.c | 141 +++ include/linux/mtd/rawnand.h | 126 +- include/linux/mtd/spinand.h | 421 +++++++ .../linux/platform_data/jz4740}/jz4740_nand.h | 4 +- include/linux/platform_data/mtd-orion_nand.h | 1 - .../linux/platform_data}/txx9/ndfmc.h | 6 +- include/linux/spi/spi-mem.h | 4 +- 82 files changed, 6200 insertions(+), 2081 deletions(-) create mode 100644 Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt create mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.txt create mode 100644 drivers/mtd/nand/raw/tegra_nand.c create mode 100644 drivers/mtd/nand/spi/Kconfig create mode 100644 drivers/mtd/nand/spi/Makefile create mode 100644 drivers/mtd/nand/spi/core.c create mode 100644 drivers/mtd/nand/spi/macronix.c create mode 100644 drivers/mtd/nand/spi/micron.c create mode 100644 drivers/mtd/nand/spi/winbond.c create mode 100644 include/linux/mtd/spinand.h rename {arch/mips/include/asm/mach-jz4740 => include/linux/platform_data/jz4740}/jz4740_nand.h (91%) rename {arch/mips/include/asm => include/linux/platform_data}/txx9/ndfmc.h (91%)