diff mbox series

[v7,2/2] dt-bindings: mtd: Document Macronix raw NAND controller bindings

Message ID 1566199149-5669-3-git-send-email-masonccyang@mxic.com.tw
State Accepted
Headers show
Series Add Macronix raw NAND controller driver | expand

Commit Message

Mason Yang Aug. 19, 2019, 7:19 a.m. UTC
Document the bindings used by the Macronix raw NAND controller.

Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
---
 .../devicetree/bindings/mtd/mxic-nand.txt          | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/mxic-nand.txt

Comments

Rob Herring Aug. 19, 2019, 7:21 p.m. UTC | #1
On Mon, Aug 19, 2019 at 1:55 AM Mason Yang <masonccyang@mxic.com.tw> wrote:
>
> Document the bindings used by the Macronix raw NAND controller.
>
> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
> ---
>  .../devicetree/bindings/mtd/mxic-nand.txt          | 36 ++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/mxic-nand.txt

I would ask for this to use DT schema, but given it is v7 already:

Reviewed-by: Rob Herring <robh@kernel.org>
Miquel Raynal Aug. 26, 2019, 12:59 p.m. UTC | #2
On Mon, 2019-08-19 at 07:19:09 UTC, Mason Yang wrote:
> Document the bindings used by the Macronix raw NAND controller.
> 
> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
> Reviewed-by: Rob Herring <robh@kernel.org>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mtd/mxic-nand.txt b/Documentation/devicetree/bindings/mtd/mxic-nand.txt
new file mode 100644
index 0000000..46c5529
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mxic-nand.txt
@@ -0,0 +1,36 @@ 
+Macronix Raw NAND Controller Device Tree Bindings
+-------------------------------------------------
+
+Required properties:
+- compatible: should be "mxic,multi-itfc-v009-nand-controller"
+- reg: should contain 1 entry for the registers
+- #address-cells: should be set to 1
+- #size-cells: should be set to 0
+- interrupts: interrupt line connected to this raw NAND controller
+- clock-names: should contain "ps", "send" and "send_dly"
+- clocks: should contain 3 phandles for the "ps", "send" and
+	 "send_dly" clocks
+
+Children nodes:
+- children nodes represent the available NAND chips.
+
+See Documentation/devicetree/bindings/mtd/nand-controller.yaml
+for more details on generic bindings.
+
+Example:
+
+	nand: nand-controller@43c30000 {
+		compatible = "mxic,multi-itfc-v009-nand-controller";
+		reg = <0x43c30000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <GIC_SPI 0x1d IRQ_TYPE_EDGE_RISING>;
+		clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>;
+		clock-names = "send", "send_dly", "ps";
+
+		nand@0 {
+			reg = <0>;
+			nand-ecc-mode = "soft";
+			nand-ecc-algo = "bch";
+		};
+	};