diff mbox series

[mtd-utils] ubi-tests: io_read: Filter invalid offset value before 'lseek' in io_read test

Message ID 1560514696-54824-1-git-send-email-chengzhihao1@huawei.com
State Accepted
Headers show
Series [mtd-utils] ubi-tests: io_read: Filter invalid offset value before 'lseek' in io_read test | expand

Commit Message

Zhihao Cheng June 14, 2019, 12:18 p.m. UTC 
From: Zhihao Cheng <chengzhihao1@huawei.com>

There are many different offset values passed in 'lseek' during io_read
testing of ubi test. The offset value maybe a negative number or a big
number that exceeds the volume data size, which can lead to ubi tests
failure by passing invalid offset value to 'lseek'. For example:

Example 1: The data size of volume is 39525 bytes, offset = (sz) -
MAX_NAND_PAGE_SIZE - 1, where MAX_NAND_PAGE_SIZE is 65536. Here, offset
is a negative value passed to 'lseek', which leads to fail in io_read.

  ======================================================================
  ======================================================================
  ======================================================================
  Test on mtdram, fastmap enabled, VID header offset factor 1
  ======================================================================
  ======================================================================
  ======================================================================
  mtdram: 16MiB, PEB size 16KiB, fastmap enabled
  Running mkvol_basic /dev/ubi0
  Running mkvol_bad /dev/ubi0
  Running mkvol_paral /dev/ubi0
  Running rsvol /dev/ubi0
  Running io_basic /dev/ubi0
  Running io_read /dev/ubi0
  [io_basic] test_read3():189: function seek() failed with error 22
  (Invalid argument)
  [io_basic] test_read3():190: len = 1
  [io_basic] test_read2():237: offset = -26012
  [io_basic] test_read1():303: length = 1
  [io_basic] test_read():362: alignment = 7905
  Error: io_read failed
  FAILURE

Example 2: The data size of volume is 79035 bytes, offset = 2 *
MAX_NAND_PAGE_SIZE, where MAX_NAND_PAGE_SIZE is 65536. Here, offset is a
value exceeds volume size, which leads to fail in io_read.

  ======================================================================
  ======================================================================
  ======================================================================
  Test on mtdram, fastmap enabled, VID header offset factor 1
  ======================================================================
  ======================================================================
  ======================================================================
  mtdram: 16MiB, PEB size 16KiB, fastmap enabled
  Running mkvol_basic /dev/ubi0
  Running mkvol_bad /dev/ubi0
  Running mkvol_paral /dev/ubi0
  Running rsvol /dev/ubi0
  Running io_basic /dev/ubi0
  Running io_read /dev/ubi0
  [io_basic] test_read3():185: function seek() failed with error 22
  (Invalid argument)
  [io_basic] test_read3():186: len = 1
  [io_basic] test_read2():233: offset = 131072
  [io_basic] test_read1():299: length = 1
  [io_basic] test_read():358: alignment = 3
  Error: io_read failed
  FAILURE

This patch checks offset value before executing 'lseek', invalid offset
values are filtered.

----------------------------------------

Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
---
 tests/ubi-tests/io_read.c | 4 ++++
 1 file changed, 4 insertions(+)

Comments

David Oberhollenzer June 17, 2019, 7:03 a.m. UTC | #1 
Applied to mtd-utils.git master.

Thanks,

David
diff mbox series

Patch

diff --git a/tests/ubi-tests/io_read.c b/tests/ubi-tests/io_read.c
index 3100ef1..f944a86 100644
--- a/tests/ubi-tests/io_read.c
+++ b/tests/ubi-tests/io_read.c
@@ -228,6 +228,10 @@  static int test_read2(const struct ubi_vol_info *vol_info, int len)
 				  vol_info->data_bytes);
 
 	for (i = 0; i < sizeof(offsets)/sizeof(off_t); i++) {
+		/* Filter invalid offset value */
+		if (offsets[i] < 0 || offsets[i] > vol_info->data_bytes)
+			continue;
+
 		if (test_read3(vol_info, len, offsets[i])) {
 			errorm("offset = %d", offsets[i]);
 			return -1;