diff mbox

[3/6] mtd: nand: lpc32xx_slc: Handle return value of clk_prepare_enable.

Message ID 1501587486-21184-1-git-send-email-arvind.yadav.cs@gmail.com
State Accepted
Delegated to: Boris Brezillon
Headers show

Commit Message

Arvind Yadav Aug. 1, 2017, 11:38 a.m. UTC 
clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
---
 drivers/mtd/nand/lpc32xx_slc.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c
index a0669a3..80c2829 100644
--- a/drivers/mtd/nand/lpc32xx_slc.c
+++ b/drivers/mtd/nand/lpc32xx_slc.c
@@ -840,7 +840,9 @@  static int lpc32xx_nand_probe(struct platform_device *pdev)
 		res = -ENOENT;
 		goto err_exit1;
 	}
-	clk_prepare_enable(host->clk);
+	res = clk_prepare_enable(host->clk);
+	if (res)
+		goto err_exit1;
 
 	/* Set NAND IO addresses and command/ready functions */
 	chip->IO_ADDR_R = SLC_DATA(host->io_base);
@@ -972,9 +974,12 @@  static int lpc32xx_nand_remove(struct platform_device *pdev)
 static int lpc32xx_nand_resume(struct platform_device *pdev)
 {
 	struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+	int ret;
 
 	/* Re-enable NAND clock */
-	clk_prepare_enable(host->clk);
+	ret = clk_prepare_enable(host->clk);
+	if (ret)
+		return ret;
 
 	/* Fresh init of NAND controller */
 	lpc32xx_nand_setup(host);