@@ -108,6 +108,232 @@ static int spinand_read_status(struct spinand_device *chip, u8 *status)
}
/*
+ * spinand_get_cfg - get configuration register value
+ * @chip: SPI NAND device structure
+ * @cfg: buffer to store value
+ * Description:
+ * Configuration register includes OTP config, Lock Tight enable/disable
+ * and Internal ECC enable/disable.
+ */
+static int spinand_get_cfg(struct spinand_device *chip, u8 *cfg)
+{
+ return spinand_read_reg(chip, REG_CFG, cfg);
+}
+
+/*
+ * spinand_set_cfg - set value to configuration register
+ * @chip: SPI NAND device structure
+ * @cfg: value to set
+ * Description:
+ * Configuration register includes OTP config, Lock Tight enable/disable
+ * and Internal ECC enable/disable.
+ */
+static int spinand_set_cfg(struct spinand_device *chip, u8 cfg)
+{
+ return spinand_write_reg(chip, REG_CFG, cfg);
+}
+
+/*
+ * spinand_enable_ecc - enable internal ECC
+ * @chip: SPI NAND device structure
+ */
+static void spinand_enable_ecc(struct spinand_device *chip)
+{
+ u8 cfg = 0;
+
+ spinand_get_cfg(chip, &cfg);
+ if ((cfg & CFG_ECC_MASK) == CFG_ECC_ENABLE)
+ return;
+ cfg |= CFG_ECC_ENABLE;
+ spinand_set_cfg(chip, cfg);
+}
+
+/*
+ * spinand_disable_ecc - disable internal ECC
+ * @chip: SPI NAND device structure
+ */
+static void spinand_disable_ecc(struct spinand_device *chip)
+{
+ u8 cfg = 0;
+
+ spinand_get_cfg(chip, &cfg);
+ if ((cfg & CFG_ECC_MASK) == CFG_ECC_ENABLE) {
+ cfg &= ~CFG_ECC_ENABLE;
+ spinand_set_cfg(chip, cfg);
+ }
+}
+
+/*
+ * spinand_write_enable - send command 06h to enable write or erase the
+ * NAND cells
+ * @chip: SPI NAND device structure
+ */
+static int spinand_write_enable(struct spinand_device *chip)
+{
+ struct spinand_op op;
+
+ spinand_init_op(&op);
+ op.cmd = SPINAND_CMD_WR_ENABLE;
+
+ return spinand_exec_op(chip, &op);
+}
+
+/*
+ * spinand_read_page_to_cache - send command 13h to read data from NAND array
+ * to cache
+ * @chip: SPI NAND device structure
+ * @page_addr: page to read
+ */
+static int spinand_read_page_to_cache(struct spinand_device *chip,
+ u32 page_addr)
+{
+ struct spinand_op op;
+
+ spinand_init_op(&op);
+ op.cmd = SPINAND_CMD_PAGE_READ;
+ op.n_addr = 3;
+ op.addr[0] = (u8)(page_addr >> 16);
+ op.addr[1] = (u8)(page_addr >> 8);
+ op.addr[2] = (u8)page_addr;
+
+ return spinand_exec_op(chip, &op);
+}
+
+/*
+ * spinand_get_address_bits - return address should be transferred
+ * by how many bits
+ * @opcode: command's operation code
+ */
+static int spinand_get_address_bits(u8 opcode)
+{
+ switch (opcode) {
+ case SPINAND_CMD_READ_FROM_CACHE_QUAD_IO:
+ return 4;
+ case SPINAND_CMD_READ_FROM_CACHE_DUAL_IO:
+ return 2;
+ default:
+ return 1;
+ }
+}
+
+/*
+ * spinand_get_data_bits - return data should be transferred by how many bits
+ * @opcode: command's operation code
+ */
+static int spinand_get_data_bits(u8 opcode)
+{
+ switch (opcode) {
+ case SPINAND_CMD_READ_FROM_CACHE_QUAD_IO:
+ case SPINAND_CMD_READ_FROM_CACHE_X4:
+ case SPINAND_CMD_PROG_LOAD_X4:
+ case SPINAND_CMD_PROG_LOAD_RDM_DATA_X4:
+ return 4;
+ case SPINAND_CMD_READ_FROM_CACHE_DUAL_IO:
+ case SPINAND_CMD_READ_FROM_CACHE_X2:
+ return 2;
+ default:
+ return 1;
+ }
+}
+
+/*
+ * spinand_read_from_cache - read data out from cache register
+ * @chip: SPI NAND device structure
+ * @page_addr: page to read
+ * @column: the location to read from the cache
+ * @len: number of bytes to read
+ * @rbuf: buffer held @len bytes
+ */
+static int spinand_read_from_cache(struct spinand_device *chip, u32 page_addr,
+ u32 column, size_t len, u8 *rbuf)
+{
+ struct spinand_op op;
+
+ spinand_init_op(&op);
+ op.cmd = chip->read_cache_op;
+ op.n_addr = 2;
+ op.addr[0] = (u8)(column >> 8);
+ op.addr[1] = (u8)column;
+ op.addr_nbits = spinand_get_address_bits(chip->read_cache_op);
+ op.n_rx = len;
+ op.rx_buf = rbuf;
+ op.data_nbits = spinand_get_data_bits(chip->read_cache_op);
+ if (chip->manufacturer.manu->ops->prepare_op)
+ chip->manufacturer.manu->ops->prepare_op(chip, &op,
+ page_addr, column);
+
+ return spinand_exec_op(chip, &op);
+}
+
+/*
+ * spinand_write_to_cache - write data to cache register
+ * @chip: SPI NAND device structure
+ * @page_addr: page to write
+ * @column: the location to write to the cache
+ * @len: number of bytes to write
+ * @wrbuf: buffer held @len bytes
+ */
+static int spinand_write_to_cache(struct spinand_device *chip, u32 page_addr,
+ u32 column, size_t len, const u8 *wbuf)
+{
+ struct spinand_op op;
+
+ spinand_init_op(&op);
+ op.cmd = chip->write_cache_op;
+ op.n_addr = 2;
+ op.addr[0] = (u8)(column >> 8);
+ op.addr[1] = (u8)column;
+ op.addr_nbits = spinand_get_address_bits(chip->write_cache_op);
+ op.n_tx = len;
+ op.tx_buf = wbuf;
+ op.data_nbits = spinand_get_data_bits(chip->write_cache_op);
+ if (chip->manufacturer.manu->ops->prepare_op)
+ chip->manufacturer.manu->ops->prepare_op(chip, &op,
+ page_addr, column);
+
+ return spinand_exec_op(chip, &op);
+}
+
+/*
+ * spinand_program_execute - send command 10h to write a page from
+ * cache to the NAND array
+ * @chip: SPI NAND device structure
+ * @page_addr: the physical page location to write the page.
+ */
+static int spinand_program_execute(struct spinand_device *chip, u32 page_addr)
+{
+ struct spinand_op op;
+
+ spinand_init_op(&op);
+ op.cmd = SPINAND_CMD_PROG_EXC;
+ op.n_addr = 3;
+ op.addr[0] = (u8)(page_addr >> 16);
+ op.addr[1] = (u8)(page_addr >> 8);
+ op.addr[2] = (u8)page_addr;
+
+ return spinand_exec_op(chip, &op);
+}
+
+/*
+ * spinand_erase_block_erase - send command D8h to erase a block
+ * @chip: SPI NAND device structure
+ * @page_addr: the start page address of block to be erased.
+ */
+static int spinand_erase_block(struct spinand_device *chip, u32 page_addr)
+{
+ struct spinand_op op;
+
+ spinand_init_op(&op);
+ op.cmd = SPINAND_CMD_BLK_ERASE;
+ op.n_addr = 3;
+ op.addr[0] = (u8)(page_addr >> 16);
+ op.addr[1] = (u8)(page_addr >> 8);
+ op.addr[2] = (u8)page_addr;
+
+ return spinand_exec_op(chip, &op);
+}
+
+/*
* spinand_wait - wait until the command is done
* @chip: SPI NAND device structure
* @s: buffer to store status register value (can be NULL)
@@ -192,6 +418,525 @@ static int spinand_lock_block(struct spinand_device *chip, u8 lock)
}
/*
+ * spinand_get_ecc_status - get ecc correction information from status register
+ * @chip: SPI NAND device structure
+ * @status: status register value
+ * @corrected: corrected bit flip number
+ * @ecc_error: ecc correction error or not
+ */
+static void spinand_get_ecc_status(struct spinand_device *chip,
+ unsigned int status,
+ unsigned int *corrected,
+ unsigned int *ecc_error)
+{
+ return chip->ecc.engine->ops->get_ecc_status(chip, status, corrected,
+ ecc_error);
+}
+
+/*
+ * spinand_do_read_page - read page from device to buffer
+ * @mtd: MTD device structure
+ * @page_addr: page address/raw address
+ * @ecc_off: without ecc or not
+ * @corrected: how many bit flip corrected
+ * @oob_only: read OOB only or the whole page
+ */
+static int spinand_do_read_page(struct mtd_info *mtd, u32 page_addr,
+ bool ecc_off, int *corrected, bool oob_only)
+{
+ struct spinand_device *chip = mtd_to_spinand(mtd);
+ struct nand_device *nand = mtd_to_nand(mtd);
+ int ret, ecc_error = 0;
+ u8 status;
+
+ spinand_read_page_to_cache(chip, page_addr);
+ ret = spinand_wait(chip, &status);
+ if (ret < 0) {
+ dev_err(chip->dev, "error %d waiting page 0x%x to cache\n",
+ ret, page_addr);
+ return ret;
+ }
+ if (!oob_only)
+ spinand_read_from_cache(chip, page_addr, 0,
+ nand_page_size(nand) +
+ nand_per_page_oobsize(nand),
+ chip->buf);
+ else
+ spinand_read_from_cache(chip, page_addr, nand_page_size(nand),
+ nand_per_page_oobsize(nand),
+ chip->oobbuf);
+ if (!ecc_off) {
+ spinand_get_ecc_status(chip, status, corrected, &ecc_error);
+ /*
+ * If there's an ECC error, print a message and notify MTD
+ * about it. Then complete the read, to load actual data on
+ * the buffer (instead of the status result).
+ */
+ if (ecc_error) {
+ dev_err(chip->dev,
+ "internal ECC error reading page 0x%x\n",
+ page_addr);
+ mtd->ecc_stats.failed++;
+ } else if (*corrected) {
+ mtd->ecc_stats.corrected += *corrected;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * spinand_do_write_page - write data from buffer to device
+ * @mtd: MTD device structure
+ * @page_addr: page address/raw address
+ * @oob_only: write OOB only or the whole page
+ */
+static int spinand_do_write_page(struct mtd_info *mtd, u32 page_addr,
+ bool oob_only)
+{
+ struct spinand_device *chip = mtd_to_spinand(mtd);
+ struct nand_device *nand = mtd_to_nand(mtd);
+ u8 status;
+ int ret = 0;
+
+ spinand_write_enable(chip);
+ if (!oob_only)
+ spinand_write_to_cache(chip, page_addr, 0,
+ nand_page_size(nand) +
+ nand_per_page_oobsize(nand), chip->buf);
+ else
+ spinand_write_to_cache(chip, page_addr, nand_page_size(nand),
+ nand_per_page_oobsize(nand),
+ chip->oobbuf);
+ spinand_program_execute(chip, page_addr);
+ ret = spinand_wait(chip, &status);
+ if (ret < 0) {
+ dev_err(chip->dev, "error %d reading page 0x%x from cache\n",
+ ret, page_addr);
+ return ret;
+ }
+ if ((status & STATUS_P_FAIL_MASK) == STATUS_P_FAIL) {
+ dev_err(chip->dev, "program page 0x%x failed\n", page_addr);
+ ret = -EIO;
+ }
+ return ret;
+}
+
+/*
+ * spinand_transfer_oob - transfer oob to client buffer
+ * @chip: SPI NAND device structure
+ * @oob: oob destination address
+ * @ops: oob ops structure
+ * @len: size of oob to transfer
+ */
+static int spinand_transfer_oob(struct spinand_device *chip, u8 *oob,
+ struct mtd_oob_ops *ops, size_t len)
+{
+ struct mtd_info *mtd = spinand_to_mtd(chip);
+ int ret = 0;
+
+ switch (ops->mode) {
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_RAW:
+ memcpy(oob, chip->oobbuf + ops->ooboffs, len);
+ break;
+ case MTD_OPS_AUTO_OOB:
+ ret = mtd_ooblayout_get_databytes(mtd, oob, chip->oobbuf,
+ ops->ooboffs, len);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
+/*
+ * spinand_fill_oob - transfer client buffer to oob
+ * @chip: SPI NAND device structure
+ * @oob: oob data buffer
+ * @len: oob data write length
+ * @ops: oob ops structure
+ */
+static int spinand_fill_oob(struct spinand_device *chip, uint8_t *oob,
+ size_t len, struct mtd_oob_ops *ops)
+{
+ struct mtd_info *mtd = spinand_to_mtd(chip);
+ struct nand_device *nand = mtd_to_nand(mtd);
+ int ret = 0;
+
+ memset(chip->oobbuf, 0xff, nand_per_page_oobsize(nand));
+ switch (ops->mode) {
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_RAW:
+ memcpy(chip->oobbuf + ops->ooboffs, oob, len);
+ break;
+ case MTD_OPS_AUTO_OOB:
+ ret = mtd_ooblayout_set_databytes(mtd, oob, chip->oobbuf,
+ ops->ooboffs, len);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
+/*
+ * spinand_read_pages - read data from device to buffer
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operations description structure
+ * @max_bitflips: maximum bitflip count
+ */
+static int spinand_read_pages(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops,
+ unsigned int *max_bitflips)
+{
+ struct spinand_device *chip = mtd_to_spinand(mtd);
+ struct nand_device *nand = mtd_to_nand(mtd);
+ int size, ret;
+ unsigned int corrected = 0;
+ bool ecc_off = ops->mode == MTD_OPS_RAW;
+ int ooblen = ops->mode == MTD_OPS_AUTO_OOB ?
+ mtd->oobavail : mtd->oobsize;
+ bool oob_only = !ops->datbuf;
+ struct nand_page_iter iter;
+
+ ops->retlen = 0;
+ ops->oobretlen = 0;
+ *max_bitflips = 0;
+
+ nand_for_each_page(nand, from, ops->len, ops->ooboffs, ops->ooblen,
+ ooblen, &iter) {
+ ret = spinand_do_read_page(mtd, iter.page, ecc_off,
+ &corrected, oob_only);
+ if (ret)
+ break;
+ *max_bitflips = max(*max_bitflips, corrected);
+ if (ops->datbuf) {
+ size = min_t(int, iter.dataleft,
+ nand_page_size(nand) - iter.pageoffs);
+ memcpy(ops->datbuf + ops->retlen,
+ chip->buf + iter.pageoffs, size);
+ ops->retlen += size;
+ }
+ if (ops->oobbuf) {
+ size = min_t(int, iter.oobleft, ooblen);
+ ret = spinand_transfer_oob(chip,
+ ops->oobbuf + ops->oobretlen,
+ ops, size);
+ if (ret) {
+ dev_err(chip->dev, "Transfer oob error %d\n", ret);
+ return ret;
+ }
+ ops->oobretlen += size;
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * spinand_do_read_ops - read data from device to buffer
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operations description structure
+ */
+static int spinand_do_read_ops(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ struct spinand_device *chip = mtd_to_spinand(mtd);
+ struct nand_device *nand = mtd_to_nand(mtd);
+ int ret;
+ struct mtd_ecc_stats stats;
+ unsigned int max_bitflips = 0;
+ bool ecc_off = ops->mode == MTD_OPS_RAW;
+
+ ret = nand_check_address(nand, from);
+ if (ret) {
+ dev_err(chip->dev, "%s: invalid read address\n", __func__);
+ return ret;
+ }
+ ret = nand_check_oob_ops(nand, from, ops);
+ if (ret) {
+ dev_err(chip->dev,
+ "%s: invalid oob operation input\n", __func__);
+ return ret;
+ }
+ mutex_lock(&chip->lock);
+ stats = mtd->ecc_stats;
+ if (ecc_off)
+ spinand_disable_ecc(chip);
+ ret = spinand_read_pages(mtd, from, ops, &max_bitflips);
+ if (ecc_off)
+ spinand_enable_ecc(chip);
+ if (ret)
+ goto out;
+
+ if (mtd->ecc_stats.failed - stats.failed) {
+ ret = -EBADMSG;
+ goto out;
+ }
+ ret = max_bitflips;
+
+out:
+ mutex_unlock(&chip->lock);
+ return ret;
+}
+
+/*
+ * spinand_write_pages - write data from buffer to device
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operations description structure
+ */
+static int spinand_write_pages(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ struct spinand_device *chip = mtd_to_spinand(mtd);
+ struct nand_device *nand = mtd_to_nand(mtd);
+ int ret = 0;
+ int size = 0;
+ int oob_size = 0;
+ int ooblen = ops->mode == MTD_OPS_AUTO_OOB ?
+ mtd->oobavail : mtd->oobsize;
+ bool oob_only = !ops->datbuf;
+ struct nand_page_iter iter;
+
+ ops->retlen = 0;
+ ops->oobretlen = 0;
+
+ nand_for_each_page(nand, to, ops->len, ops->ooboffs, ops->ooblen,
+ ooblen, &iter) {
+ memset(chip->buf, 0xff,
+ nand_page_size(nand) + nand_per_page_oobsize(nand));
+ if (ops->oobbuf) {
+ oob_size = min_t(int, iter.oobleft, ooblen);
+ ret = spinand_fill_oob(chip,
+ ops->oobbuf + ops->oobretlen,
+ oob_size, ops);
+ if (ret) {
+ dev_err(chip->dev, "Fill oob error %d\n", ret);
+ return ret;
+ }
+ }
+ if (ops->datbuf) {
+ size = min_t(int, iter.dataleft,
+ nand_page_size(nand) - iter.pageoffs);
+ memcpy(chip->buf + iter.pageoffs,
+ ops->datbuf + ops->retlen, size);
+ }
+ ret = spinand_do_write_page(mtd, iter.page, oob_only);
+ if (ret) {
+ dev_err(chip->dev, "error %d writing page 0x%x\n",
+ ret, iter.page);
+ return ret;
+ }
+ if (ops->datbuf)
+ ops->retlen += size;
+ if (ops->oobbuf)
+ ops->oobretlen += oob_size;
+ }
+
+ return ret;
+}
+
+/*
+ * spinand_do_write_ops - write data from buffer to device
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operations description structure
+ */
+static int spinand_do_write_ops(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ struct spinand_device *chip = mtd_to_spinand(mtd);
+ struct nand_device *nand = mtd_to_nand(mtd);
+ int ret = 0;
+ bool ecc_off = ops->mode == MTD_OPS_RAW;
+
+ ret = nand_check_address(nand, to);
+ if (ret) {
+ dev_err(chip->dev, "%s: invalid write address\n", __func__);
+ return ret;
+ }
+ ret = nand_check_oob_ops(nand, to, ops);
+ if (ret) {
+ dev_err(chip->dev,
+ "%s: invalid oob operation input\n", __func__);
+ return ret;
+ }
+ if (nand_oob_ops_across_page(mtd_to_nand(mtd), ops)) {
+ dev_err(chip->dev,
+ "%s: try to across page when writing with OOB\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ mutex_lock(&chip->lock);
+ if (ecc_off)
+ spinand_disable_ecc(chip);
+ ret = spinand_write_pages(mtd, to, ops);
+ if (ecc_off)
+ spinand_enable_ecc(chip);
+ mutex_unlock(&chip->lock);
+
+ return ret;
+}
+
+/*
+ * spinand_read - [MTD Interface] read page data
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @len: number of bytes to read
+ * @retlen: pointer to variable to store the number of read bytes
+ * @buf: the databuffer to put data
+ */
+static int spinand_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u8 *buf)
+{
+ struct mtd_oob_ops ops;
+ int ret;
+
+ memset(&ops, 0, sizeof(ops));
+ ops.len = len;
+ ops.datbuf = buf;
+ ops.mode = MTD_OPS_PLACE_OOB;
+ ret = spinand_do_read_ops(mtd, from, &ops);
+ *retlen = ops.retlen;
+
+ return ret;
+}
+
+/*
+ * spinand_write - [MTD Interface] write page data
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
+ */
+static int spinand_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u8 *buf)
+{
+ struct mtd_oob_ops ops;
+ int ret;
+
+ memset(&ops, 0, sizeof(ops));
+ ops.len = len;
+ ops.datbuf = (uint8_t *)buf;
+ ops.mode = MTD_OPS_PLACE_OOB;
+ ret = spinand_do_write_ops(mtd, to, &ops);
+ *retlen = ops.retlen;
+
+ return ret;
+}
+
+/*
+ * spinand_read_oob - [MTD Interface] read page data and/or out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
+ */
+static int spinand_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ int ret = -ENOTSUPP;
+
+ ops->retlen = 0;
+ switch (ops->mode) {
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
+ case MTD_OPS_RAW:
+ ret = spinand_do_read_ops(mtd, from, ops);
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * spinand_write_oob - [MTD Interface] write page data and/or out-of-band
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
+ */
+static int spinand_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ int ret = -ENOTSUPP;
+
+ ops->retlen = 0;
+ switch (ops->mode) {
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
+ case MTD_OPS_RAW:
+ ret = spinand_do_write_ops(mtd, to, ops);
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * spinand_erase - [MTD Interface] erase block(s)
+ * @mtd: MTD device structure
+ * @einfo: erase instruction
+ */
+static int spinand_erase(struct mtd_info *mtd, struct erase_info *einfo)
+{
+ struct spinand_device *chip = mtd_to_spinand(mtd);
+ struct nand_device *nand = mtd_to_nand(mtd);
+ loff_t offs = einfo->addr, len = einfo->len;
+ u8 status;
+ int ret;
+
+ ret = nand_check_erase_ops(nand, einfo);
+ if (ret) {
+ dev_err(chip->dev, "invalid erase operation input\n");
+ return ret;
+ }
+
+ mutex_lock(&chip->lock);
+ einfo->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
+ einfo->state = MTD_ERASING;
+
+ while (len) {
+ spinand_write_enable(chip);
+ spinand_erase_block(chip, nand_offs_to_page(nand, offs));
+ ret = spinand_wait(chip, &status);
+ if (ret < 0) {
+ dev_err(chip->dev, "block erase command wait failed\n");
+ einfo->state = MTD_ERASE_FAILED;
+ goto erase_exit;
+ }
+ if ((status & STATUS_E_FAIL_MASK) == STATUS_E_FAIL) {
+ dev_err(chip->dev, "erase block 0x%012llx failed\n", offs);
+ einfo->state = MTD_ERASE_FAILED;
+ einfo->fail_addr = offs;
+ goto erase_exit;
+ }
+
+ /* Increment page address and decrement length */
+ len -= nand_eraseblock_size(nand);
+ offs += nand_eraseblock_size(nand);
+ }
+
+ einfo->state = MTD_ERASE_DONE;
+
+erase_exit:
+
+ ret = einfo->state == MTD_ERASE_DONE ? 0 : -EIO;
+
+ mutex_unlock(&chip->lock);
+
+ /* Do call back function */
+ if (!ret)
+ mtd_erase_callback(einfo);
+
+ return ret;
+}
+
+/*
* spinand_set_rd_wr_op - choose the best read write command
* @chip: SPI NAND device structure
* Description:
@@ -364,6 +1109,11 @@ static int spinand_init(struct spinand_device *chip)
if (ret < 0)
ret = 0;
mtd->oobavail = ret;
+ mtd->_erase = spinand_erase;
+ mtd->_read = spinand_read;
+ mtd->_write = spinand_write;
+ mtd->_read_oob = spinand_read_oob;
+ mtd->_write_oob = spinand_write_oob;
if (!mtd->bitflip_threshold)
mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3,
@@ -101,6 +101,8 @@ struct spinand_manufacturer_ops {
bool (*detect)(struct spinand_device *chip);
int (*init)(struct spinand_device *chip);
void (*cleanup)(struct spinand_device *chip);
+ void (*prepare_op)(struct spinand_device *chip, struct spinand_op *op,
+ u32 page, u32 column);
};
struct spinand_manufacturer {
This commit is to support read, readoob, write, writeoob and erase operations in the new spi nand framework. Signed-off-by: Peter Pan <peterpandong@micron.com> --- drivers/mtd/nand/spi/core.c | 750 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/mtd/spinand.h | 2 + 2 files changed, 752 insertions(+)