diff mbox

[2/5] mtd: nand: Allow MTD_NAND_BRCMNAND to be selected for ARM64

Message ID 1443808606-21203-3-git-send-email-anup.patel@broadcom.com
State Accepted
Commit ebdee13ac2b4f1463c1c195a40fa4f1555184f17
Headers show

Commit Message

Anup Patel Oct. 2, 2015, 5:56 p.m. UTC 
The BRCM NAND driver can be re-used for Broadcom ARM64 SoCs hence
this patch updates Kconfig to allow selection of MTD_NAND_BRCMNAND
for ARM64.

Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Vikram Prakash <vikramp@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Pramod KUMAR <pramodku@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
 drivers/mtd/nand/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Brian Norris Oct. 12, 2015, 9:20 p.m. UTC | #1 
On Fri, Oct 02, 2015 at 11:26:43PM +0530, Anup Patel wrote:
> The BRCM NAND driver can be re-used for Broadcom ARM64 SoCs hence
> this patch updates Kconfig to allow selection of MTD_NAND_BRCMNAND
> for ARM64.
> 
> Signed-off-by: Anup Patel <anup.patel@broadcom.com>
> Reviewed-by: Vikram Prakash <vikramp@broadcom.com>
> Reviewed-by: Ray Jui <rjui@broadcom.com>
> Reviewed-by: Pramod KUMAR <pramodku@broadcom.com>
> Reviewed-by: Scott Branden <sbranden@broadcom.com>

Pushed to l2-mtd.git
diff mbox

Patch

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 3324281..a1b5819 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -393,7 +393,7 @@  config MTD_NAND_GPMI_NAND
 
 config MTD_NAND_BRCMNAND
 	tristate "Broadcom STB NAND controller"
-	depends on ARM || MIPS
+	depends on ARM || ARM64 || MIPS
 	help
 	  Enables the Broadcom NAND controller driver. The controller was
 	  originally designed for Set-Top Box but is used on various BCM7xxx,