Message ID | 1435722257-13218-1-git-send-email-yangds.fnst@cn.fujitsu.com |
---|---|
State | Accepted |
Commit | ddd8d3b39fc9b84a3bdb94d9ac62d2b20581dca4 |
Headers | show |
On Wed, Jul 01, 2015 at 11:44:14AM +0800, Dongsheng Yang wrote: > Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> > --- > MAKEDEV | 2 +- > fectest.c | 3 +-- > tests/ubi-tests/stress-test.sh | 8 ++++---- > ubi-utils/libubi.c | 2 +- > 4 files changed, 7 insertions(+), 8 deletions(-) > > diff --git a/MAKEDEV b/MAKEDEV > index b31e61f..a4141b5 100755 > --- a/MAKEDEV > +++ b/MAKEDEV > @@ -38,5 +38,5 @@ for a in `seq 0 16` ; do > mknod /dev/mtd$a c 90 `expr $a + $a` > mknod /dev/mtdr$a c 90 `expr $a + $a + 1` > mknod /dev/mtdblock$a b 31 $a > -done > +done > > diff --git a/fectest.c b/fectest.c > index c1fbd52..fd577f3 100644 > --- a/fectest.c > +++ b/fectest.c > @@ -11,7 +11,6 @@ > #include <crc32.h> > > #define ERASE_SIZE 131072 > -//#define PKT_SIZE 1400 The subject isn't exactly correct, since you're also killing this comment. But these look good. Pushed patches 1, 2, and 3. I'll reexamine 4, as it's a bit bigger of a change. Thanks, Brian > #define NR_PKTS ((ERASE_SIZE + PKT_SIZE - 1) / PKT_SIZE) > #define DROPS 8 > > @@ -83,7 +82,7 @@ int main(void) > fd = open("after", O_WRONLY|O_TRUNC|O_CREAT, 0644); > if (fd >= 0) > write(fd, pktbuf, ERASE_SIZE); > - > + > exit(1); > } > > diff --git a/tests/ubi-tests/stress-test.sh b/tests/ubi-tests/stress-test.sh > index 50c563a..a150495 100755 > --- a/tests/ubi-tests/stress-test.sh > +++ b/tests/ubi-tests/stress-test.sh > @@ -60,12 +60,12 @@ print_params() > if [ "$module" = "nandsim" ]; then > printf "%s" "page size ${page_size}KiB, VID offset $vid_offs, " > fi > - printf "%s\n" "fastmap $fastmap" > + printf "%s\n" "fastmap $fastmap" > } > > # Load mtdram with specified size and PEB size > # Usage: load_mtdram <flash size> <PEB size> > -# 1. Flash size is specified in MiB > +# 1. Flash size is specified in MiB > # 2. PEB size is specified in KiB > load_mtdram() > { > @@ -86,7 +86,7 @@ print_separator() > # Usage: run_test <nandsim|mtdram> <flash size> <PEB size> \ > # <Page size> <VID hdr offs> <enable fastmap> > # 1. Simulator type (nandsim or mtdram) > -# 2. Flash size is specified in MiB > +# 2. Flash size is specified in MiB > # 3. PEB size is specified in KiB > # 4. Page size is specified in bytes (mtdram ingores this) > # 5. VID header offset (mtdram ingores this) > @@ -98,7 +98,7 @@ run_test() > local peb_size="$3"; > local page_size="$4"; > local vid_offs="$5" > - local fastmap="$6"; > + local fastmap="$6"; > local fm_supported fm_param mtdnum > > print_separator > diff --git a/ubi-utils/libubi.c b/ubi-utils/libubi.c > index 1e08b7d..97c0434 100644 > --- a/ubi-utils/libubi.c > +++ b/ubi-utils/libubi.c > @@ -792,7 +792,7 @@ int ubi_attach(libubi_t desc, const char *node, struct ubi_attach_request *req) > req->dev_num = r.ubi_num; > /* > * The call succeeded. It means that the kernel ignored > - * 'max_beb_per1024' parameter. > + * 'max_beb_per1024' parameter. > */ > return 1; > } else if (errno != EINVAL) > -- > 1.8.4.2 >
diff --git a/MAKEDEV b/MAKEDEV index b31e61f..a4141b5 100755 --- a/MAKEDEV +++ b/MAKEDEV @@ -38,5 +38,5 @@ for a in `seq 0 16` ; do mknod /dev/mtd$a c 90 `expr $a + $a` mknod /dev/mtdr$a c 90 `expr $a + $a + 1` mknod /dev/mtdblock$a b 31 $a -done +done diff --git a/fectest.c b/fectest.c index c1fbd52..fd577f3 100644 --- a/fectest.c +++ b/fectest.c @@ -11,7 +11,6 @@ #include <crc32.h> #define ERASE_SIZE 131072 -//#define PKT_SIZE 1400 #define NR_PKTS ((ERASE_SIZE + PKT_SIZE - 1) / PKT_SIZE) #define DROPS 8 @@ -83,7 +82,7 @@ int main(void) fd = open("after", O_WRONLY|O_TRUNC|O_CREAT, 0644); if (fd >= 0) write(fd, pktbuf, ERASE_SIZE); - + exit(1); } diff --git a/tests/ubi-tests/stress-test.sh b/tests/ubi-tests/stress-test.sh index 50c563a..a150495 100755 --- a/tests/ubi-tests/stress-test.sh +++ b/tests/ubi-tests/stress-test.sh @@ -60,12 +60,12 @@ print_params() if [ "$module" = "nandsim" ]; then printf "%s" "page size ${page_size}KiB, VID offset $vid_offs, " fi - printf "%s\n" "fastmap $fastmap" + printf "%s\n" "fastmap $fastmap" } # Load mtdram with specified size and PEB size # Usage: load_mtdram <flash size> <PEB size> -# 1. Flash size is specified in MiB +# 1. Flash size is specified in MiB # 2. PEB size is specified in KiB load_mtdram() { @@ -86,7 +86,7 @@ print_separator() # Usage: run_test <nandsim|mtdram> <flash size> <PEB size> \ # <Page size> <VID hdr offs> <enable fastmap> # 1. Simulator type (nandsim or mtdram) -# 2. Flash size is specified in MiB +# 2. Flash size is specified in MiB # 3. PEB size is specified in KiB # 4. Page size is specified in bytes (mtdram ingores this) # 5. VID header offset (mtdram ingores this) @@ -98,7 +98,7 @@ run_test() local peb_size="$3"; local page_size="$4"; local vid_offs="$5" - local fastmap="$6"; + local fastmap="$6"; local fm_supported fm_param mtdnum print_separator diff --git a/ubi-utils/libubi.c b/ubi-utils/libubi.c index 1e08b7d..97c0434 100644 --- a/ubi-utils/libubi.c +++ b/ubi-utils/libubi.c @@ -792,7 +792,7 @@ int ubi_attach(libubi_t desc, const char *node, struct ubi_attach_request *req) req->dev_num = r.ubi_num; /* * The call succeeded. It means that the kernel ignored - * 'max_beb_per1024' parameter. + * 'max_beb_per1024' parameter. */ return 1; } else if (errno != EINVAL)
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> --- MAKEDEV | 2 +- fectest.c | 3 +-- tests/ubi-tests/stress-test.sh | 8 ++++---- ubi-utils/libubi.c | 2 +- 4 files changed, 7 insertions(+), 8 deletions(-)