diff mbox

[2/6] mtd: atmel_nand: replace pmecc enable code with one function.

Message ID 1371622997-26303-3-git-send-email-josh.wu@atmel.com
State New, archived
Headers show

Commit Message

Josh Wu June 19, 2013, 6:23 a.m. UTC 
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---
 drivers/mtd/nand/atmel_nand.c |   40 +++++++++++++++++++++++++---------------
 1 file changed, 25 insertions(+), 15 deletions(-)

Comments

Sergei Shtylyov June 19, 2013, 2:15 p.m. UTC | #1 
Hello.

On 19-06-2013 10:23, Josh Wu wrote:

> Signed-off-by: Josh Wu <josh.wu@atmel.com>
> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>   drivers/mtd/nand/atmel_nand.c |   40 +++++++++++++++++++++++++---------------
>   1 file changed, 25 insertions(+), 15 deletions(-)

> diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
> index d39f364..cb8362e 100644
> --- a/drivers/mtd/nand/atmel_nand.c
> +++ b/drivers/mtd/nand/atmel_nand.c
> @@ -754,6 +754,29 @@ normal_check:
>   	return total_err;
>   }
>
> +static void pmecc_enable(struct atmel_nand_host *host, int ecc_op)
> +{
> +	u32 val;

    Other functions have empty line after the declaration.

> +	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
> +	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
> +	val = pmecc_readl_relaxed(host->ecc, CFG);
> +
> +	if (ecc_op != NAND_ECC_READ && ecc_op != NAND_ECC_WRITE) {
> +		dev_err(host->dev, "atmel_nand: wrong pmecc operation type!");
> +		return;
> +	}
> +
> +	if (ecc_op == NAND_ECC_READ)
> +		pmecc_writel(host->ecc, CFG, (val & ~PMECC_CFG_WRITE_OP)
> +			| PMECC_CFG_AUTO_ENABLE);
> +	else
> +		pmecc_writel(host->ecc, CFG, (val | PMECC_CFG_WRITE_OP)
> +			& ~PMECC_CFG_AUTO_ENABLE);
> +
> +	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE);
> +	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DATA);
> +}
> +

WBR, Sergei
diff mbox

Patch

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index d39f364..cb8362e 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -754,6 +754,29 @@  normal_check:
 	return total_err;
 }
 
+static void pmecc_enable(struct atmel_nand_host *host, int ecc_op)
+{
+	u32 val;
+	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
+	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+	val = pmecc_readl_relaxed(host->ecc, CFG);
+
+	if (ecc_op != NAND_ECC_READ && ecc_op != NAND_ECC_WRITE) {
+		dev_err(host->dev, "atmel_nand: wrong pmecc operation type!");
+		return;
+	}
+
+	if (ecc_op == NAND_ECC_READ)
+		pmecc_writel(host->ecc, CFG, (val & ~PMECC_CFG_WRITE_OP)
+			| PMECC_CFG_AUTO_ENABLE);
+	else
+		pmecc_writel(host->ecc, CFG, (val | PMECC_CFG_WRITE_OP)
+			& ~PMECC_CFG_AUTO_ENABLE);
+
+	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE);
+	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DATA);
+}
+
 static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
 	struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
 {
@@ -765,13 +788,7 @@  static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
 	unsigned long end_time;
 	int bitflips = 0;
 
-	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
-	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
-	pmecc_writel(host->ecc, CFG, (pmecc_readl_relaxed(host->ecc, CFG)
-		& ~PMECC_CFG_WRITE_OP) | PMECC_CFG_AUTO_ENABLE);
-
-	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE);
-	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DATA);
+	pmecc_enable(host, NAND_ECC_READ);
 
 	chip->read_buf(mtd, buf, eccsize);
 	chip->read_buf(mtd, oob, mtd->oobsize);
@@ -804,14 +821,7 @@  static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
 	int i, j;
 	unsigned long end_time;
 
-	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
-	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
-
-	pmecc_writel(host->ecc, CFG, (pmecc_readl_relaxed(host->ecc, CFG) |
-		PMECC_CFG_WRITE_OP) & ~PMECC_CFG_AUTO_ENABLE);
-
-	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE);
-	pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DATA);
+	pmecc_enable(host, NAND_ECC_WRITE);
 
 	chip->write_buf(mtd, (u8 *)buf, mtd->writesize);