@@ -189,8 +189,7 @@ static void __iomem *baseaddr;
<title>Partition defines</title>
<para>
If you want to divide your device into partitions, then
- enable the configuration switch CONFIG_MTD_PARTITIONS and define
- a partitioning scheme suitable to your board.
+ define a partitioning scheme suitable to your board.
</para>
<programlisting>
#define NUM_PARTITIONS 2
@@ -1,7 +1,6 @@
menuconfig MTD
tristate "Memory Technology Device (MTD) support"
depends on HAS_IOMEM
- select MTD_PARTITIONS
help
Memory Technology Devices are flash, RAM and similar chips, often
used for solid state file systems on embedded devices. This option
@@ -34,11 +33,6 @@ config MTD_TESTS
should normally be compiled as kernel modules. The modules perform
various checks and verifications when loaded.
-config MTD_PARTITIONS
- bool
-
-if MTD_PARTITIONS
-
config MTD_REDBOOT_PARTS
tristate "RedBoot partition table parsing"
---help---
@@ -91,7 +85,7 @@ endif # MTD_REDBOOT_PARTS
config MTD_CMDLINE_PARTS
bool "Command line partition table parsing"
- depends on MTD_PARTITIONS = "y" && MTD = "y"
+ depends on MTD = "y"
---help---
Allow generic configuration of the MTD partition tables via the kernel
command line. Multiple flash resources are supported for hardware where
@@ -156,8 +150,6 @@ config MTD_AR7_PARTS
---help---
TI AR7 partitioning support
-endif # MTD_PARTITIONS
-
comment "User Modules And Translation Layers"
config MTD_CHAR
@@ -4,8 +4,7 @@
# Core functionality.
obj-$(CONFIG_MTD) += mtd.o
-mtd-y := mtdcore.o mtdsuper.o mtdconcat.o
-mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
+mtd-y := mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o
mtd-$(CONFIG_MTD_OF_PARTS) += ofpart.o
obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
@@ -82,7 +82,6 @@ config MTD_PHYSMAP_OF
config MTD_PMC_MSP_EVM
tristate "CFI Flash device mapped on PMC-Sierra MSP"
depends on PMC_MSP && MTD_CFI
- select MTD_PARTITIONS
help
This provides a 'mapping' driver which supports the way
in which user-programmable flash chips are connected on the
@@ -122,7 +121,7 @@ config MTD_SC520CDP
config MTD_NETSC520
tristate "CFI Flash device mapped on AMD NetSc520"
- depends on X86 && MTD_CFI && MTD_PARTITIONS
+ depends on X86 && MTD_CFI
help
This enables access routines for the flash chips on the AMD NetSc520
demonstration board. If you have one of these boards and would like
@@ -131,7 +130,6 @@ config MTD_NETSC520
config MTD_TS5500
tristate "JEDEC Flash device mapped on Technologic Systems TS-5500"
depends on X86
- select MTD_PARTITIONS
select MTD_JEDECPROBE
select MTD_CFI_AMDSTD
help
@@ -149,7 +147,7 @@ config MTD_TS5500
config MTD_SBC_GXX
tristate "CFI Flash device mapped on Arcom SBC-GXx boards"
- depends on X86 && MTD_CFI_INTELEXT && MTD_PARTITIONS && MTD_COMPLEX_MAPPINGS
+ depends on X86 && MTD_CFI_INTELEXT && MTD_COMPLEX_MAPPINGS
help
This provides a driver for the on-board flash of Arcom Control
Systems' SBC-GXn family of boards, formerly known as SBC-MediaGX.
@@ -246,7 +244,7 @@ config MTD_TSUNAMI
config MTD_NETtel
tristate "CFI flash device on SnapGear/SecureEdge"
- depends on X86 && MTD_PARTITIONS && MTD_JEDECPROBE
+ depends on X86 && MTD_JEDECPROBE
help
Support for flash chips on NETtel/SecureEdge/SnapGear boards.
@@ -262,13 +260,12 @@ config MTD_BCM963XX
config MTD_LANTIQ
tristate "Lantiq SoC NOR support"
depends on LANTIQ
- select MTD_PARTITIONS
help
Support for NOR flash attached to the Lantiq SoC's External Bus Unit.
config MTD_DILNETPC
tristate "CFI Flash device mapped on DIL/Net PC"
- depends on X86 && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
+ depends on X86 && MTD_CFI_INTELEXT && BROKEN
help
MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP".
For details, see <http://www.ssv-embedded.de/ssv/pc104/p169.htm>
@@ -388,7 +385,7 @@ config MTD_IXP2000
config MTD_FORTUNET
tristate "CFI Flash device mapped on the FortuNet board"
- depends on MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET
+ depends on MTD_CFI && SA1100_FORTUNET
help
This enables access to the Flash on the FortuNet board. If you
have such a board, say 'Y'.
@@ -486,7 +483,6 @@ config MTD_UCLINUX
config MTD_WRSBC8260
tristate "Map driver for WindRiver PowerQUICC II MPC82xx board"
depends on (SBC82xx || SBC8560)
- select MTD_PARTITIONS
select MTD_MAP_BANK_WIDTH_4
select MTD_MAP_BANK_WIDTH_1
select MTD_CFI_I1
@@ -499,7 +495,6 @@ config MTD_WRSBC8260
config MTD_DMV182
tristate "Map driver for Dy-4 SVME/DMV-182 board."
depends on DMV182
- select MTD_PARTITIONS
select MTD_MAP_BANK_WIDTH_32
select MTD_CFI_I8
select MTD_CFI_AMDSTD
@@ -512,7 +512,6 @@ static int shrink_ecclayout(const struct nand_ecclayout *from,
return 0;
}
-#ifdef CONFIG_MTD_PARTITIONS
static int mtd_blkpg_ioctl(struct mtd_info *mtd,
struct blkpg_ioctl_arg __user *arg)
{
@@ -548,8 +547,6 @@ static int mtd_blkpg_ioctl(struct mtd_info *mtd,
return -EINVAL;
}
}
-#endif
-
static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
{
@@ -941,7 +938,6 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
break;
}
-#ifdef CONFIG_MTD_PARTITIONS
case BLKPG:
{
ret = mtd_blkpg_ioctl(mtd,
@@ -955,7 +951,6 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg)
ret = 0;
break;
}
-#endif
default:
ret = -ENOTTY;
@@ -419,7 +419,6 @@ config MTD_NAND_TMIO
config MTD_NAND_NANDSIM
tristate "Support for NAND Flash Simulator"
- depends on MTD_PARTITIONS
help
The simulator may simulate various NAND flash chips for the
MTD nand layer.
@@ -513,7 +512,7 @@ config MTD_NAND_SOCRATES
config MTD_NAND_NUC900
tristate "Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards."
- depends on ARCH_W90X900 && MTD_PARTITIONS
+ depends on ARCH_W90X900
help
This enables the driver for the NAND Flash on evaluation board based
on w90p910 / NUC9xx.
@@ -373,15 +373,7 @@ int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,
unsigned long count, loff_t from, size_t *retlen);
-#ifdef CONFIG_MTD_PARTITIONS
void mtd_erase_callback(struct erase_info *instr);
-#else
-static inline void mtd_erase_callback(struct erase_info *instr)
-{
- if (instr->callback)
- instr->callback(instr);
-}
-#endif
/*
* Debugging macro and defines
Now that none of the drivers use CONFIG_MTD_PARTITIONS we can remove it from Kconfig and the last remaining uses. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Artem Bityutskiy <dedekind1@gmail.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> --- Documentation/DocBook/mtdnand.tmpl | 3 +-- drivers/mtd/Kconfig | 10 +--------- drivers/mtd/Makefile | 3 +-- drivers/mtd/maps/Kconfig | 15 +++++---------- drivers/mtd/mtdchar.c | 5 ----- drivers/mtd/nand/Kconfig | 3 +-- include/linux/mtd/mtd.h | 8 -------- 7 files changed, 9 insertions(+), 38 deletions(-)