| [v6,26/36] mtd: st_spi_fsm: Write to Flash via the FSM FIFO |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,25/36] mtd: st_spi_fsm: Add the ability to read from a Serial Flash device |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Accepted |
| [v6,24/36] mtd: st_spi_fsm: Prepare default sequences for read/write/erase |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Accepted |
| [v6,23/36] mtd: st_spi_fsm: Supply the N25Qxxx chip specific configuration call-back |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Accepted |
| [v6,22/36] mtd: st_spi_fsm: Supply the N25Qxxx specific read configurations |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,21/36] mtd: st_spi_fsm: Provide the default read/write configurations |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,20/36] mtd: st_spi_fsm: Update the flash Volatile Configuration Register |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,19/36] mtd: st_spi_fsm: Provide a method to put the chip into 32bit addressing mode |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,18/36] mtd: st_spi_fsm: Add a check to if the chip can handle an SoC reset |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,17/36] mtd: st_spi_fsm: Prepare read/write sequences according to configuration |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,16/36] mtd: st_spi_fsm: Provide the sequence for enabling 32bit addressing mode |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,15/36] mtd: st_spi_fsm: Provide the erase one sector sequence |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,14/36] mtd: st_spi_fsm: Fetch boot-device from mode pins |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,13/36] mtd: st_spi_fsm: Add device-tree binding documentation |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,12/36] mtd: st_spi_fsm: Prepare the read/write FSM message sequence(s) |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,11/36] mtd: st_spi_fsm: Use device size to determine address width |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Accepted |
| [v6,10/36] mtd: st_spi_fsm: Search for preferred FSM message sequence configurations |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,09/36] mtd: st_spi_fsm: Dynamically setup flash device based on JEDEC ID |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Accepted |
| [v6,08/36] mtd: st_spi_fsm: Provide device look-up table |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,07/36] mtd: devices: Provide header for shared OPCODEs and SFDP commands |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,06/36] mtd: st_spi_fsm: Add support for JEDEC ID extraction |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Accepted |
| [v6,05/36] mtd: st_spi_fsm: Supply a method to read from the FSM's FIFO |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,04/36] mtd: st_spi_fsm: Supply framework for device requests |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Superseded |
| [v6,03/36] mtd: st_spi_fsm: Initialise and configure the FSM for normal working conditions |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Accepted |
| [v6,02/36] mtd: st_spi_fsm: Supply all register address and bit logic defines |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Accepted |
| [v6,01/36] mtd: st_spi_fsm: Allocate resources and register with MTD framework |
0
0
0
|
2014-03-20 |
Lee Jones |
|
Accepted |
| [v7,4/4] mtd: devices: elm: update DRIVER_NAME as "omap-elm" |
0
0
0
|
2014-03-20 |
pekon gupta |
|
New |
| [v7,3/4] mtd: devices: elm: configure parallel channels based on ecc_steps |
0
0
0
|
2014-03-20 |
pekon gupta |
|
New |
| [v7,2/4] mtd: devices: elm: clean elm_load_syndrome |
0
0
0
|
2014-03-20 |
pekon gupta |
|
New |
| [v7,1/4] mtd: devices: elm: check for hardware engine's design constraints |
0
0
0
|
2014-03-20 |
pekon gupta |
|
New |
| mtd: diskonchip: mem resource name is not optional |
0
0
1
|
2014-03-19 |
Sasha Levin |
|
Accepted |
| UBI: block: Avoid disk size integer overflow |
0
0
0
|
2014-03-19 |
Richard Weinberger |
|
New |
| mtd: gpmi: make blockmark swapping optional |
0
0
0
|
2014-03-19 |
y@karo-electronics.de |
|
New |
| [2/2] UBI: block: Implement kernel_param_ops->get() |
0
0
0
|
2014-03-19 |
Richard Weinberger |
|
New |
| [1/2] UBI: block: Remove __initdata from ubiblock_param_ops |
1
0
0
|
2014-03-19 |
Richard Weinberger |
|
Accepted |
| [v9,5/5] mtd: nand: omap: ecc.correct: omap_elm_correct_data: fix programmed-page bit-flip correction logic |
0
0
1
|
2014-03-18 |
pekon gupta |
|
Accepted |
| [v9,4/5] mtd: nand: omap: ecc.correct: omap_elm_correct_data: cleanup for future enhancements |
0
0
1
|
2014-03-18 |
pekon gupta |
|
Accepted |
| [v9,3/5] mtd: nand: omap: ecc.correct: omap_elm_correct_data: fix erased-page detection for BCHx_HW ECC schemes |
0
0
0
|
2014-03-18 |
pekon gupta |
|
Accepted |
| [v9,2/5] mtd: nand: omap: ecc.correct: omap_elm_correct_data: rename ambiguous variable 'eccsize' and 'ecc_vector_size' |
0
0
1
|
2014-03-18 |
pekon gupta |
|
New |
| [v9,1/5] mtd: nand: omap: add field to indicate current ecc-scheme in 'struct omap_nand_info' |
0
0
1
|
2014-03-18 |
pekon gupta |
|
New |
| [RFC/PATCH] mtd: nand: Account the blocks used by the BBT in the ecc_stats |
0
0
0
|
2014-03-17 |
Ezequiel Garcia |
|
Superseded |
| [4/4] mtd: nand: pxa3xx: Add supported ECC strength and step size to the DT binding |
0
0
0
|
2014-03-17 |
Ezequiel Garcia |
|
Superseded |
| [3/4] mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding |
0
0
0
|
2014-03-17 |
Ezequiel Garcia |
|
New |
| [2/4] mtd: nand: pxa3xx: Clean pxa_ecc_init() error handling |
0
0
0
|
2014-03-17 |
Ezequiel Garcia |
|
New |
| [1/4] mtd: nand: pxa3xx: Normalize ECC strength for ECC scheme selection |
0
0
0
|
2014-03-17 |
Ezequiel Garcia |
|
New |
| [2/2] Use the nand_read_subpage index everywhere |
0
0
0
|
2014-03-15 |
Ron |
|
Accepted |
| [1/2] Fix index regression in nand_read_subpage |
0
0
0
|
2014-03-15 |
Ron |
|
Accepted |
| mtd: Fix Elan SC520 dependencies |
0
0
0
|
2014-03-14 |
Jean Delvare |
|
Accepted |
| [v2] ubi-utils: Add ubiblock tool |
0
0
0
|
2014-03-14 |
Ezequiel Garcia |
|
New |
| ubi-utils: Add ubiblock tool |
0
0
0
|
2014-03-14 |
Ezequiel Garcia |
|
New |
| [RFC,v2] mtd: nand: add erased-page bitflip correction |
0
0
0
|
2014-03-14 |
pekon gupta |
|
New |
| [v3,6/6] clk: mvebu: Update binding documentation for the core divider clock |
0
0
0
|
2014-03-13 |
Ezequiel Garcia |
|
New |
| [v3,5/6] ARM: mvebu: Enable NAND controller in Armada 385-DB |
0
0
0
|
2014-03-13 |
Ezequiel Garcia |
|
New |
| [v3,4/6] ARM: mvebu: Add support for NAND controller in Armada 38x SoC |
0
0
0
|
2014-03-13 |
Ezequiel Garcia |
|
New |
| [v3,3/6] ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs |
0
0
0
|
2014-03-13 |
Ezequiel Garcia |
|
New |
| [v3,2/6] ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs |
0
0
0
|
2014-03-13 |
Ezequiel Garcia |
|
New |
| [v3,1/6] clk: mvebu: Support Armada 380 SoC on the core divider clock |
0
0
0
|
2014-03-13 |
Ezequiel Garcia |
|
New |
| [v2,6/6] clk: mvebu: Update binding documentation for the core divider clock |
0
0
0
|
2014-03-13 |
Ezequiel García |
|
New |
| [v2,5/6] ARM: mvebu: Enable NAND controller in Armada 385-DB |
0
0
0
|
2014-03-13 |
Ezequiel García |
|
New |
| [v2,4/6] ARM: mvebu: Add support for NAND controller in Armada 38x SoC |
0
0
0
|
2014-03-13 |
Ezequiel García |
|
New |
| [v2,3/6] ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs |
0
0
0
|
2014-03-13 |
Ezequiel García |
|
New |
| [v2,2/6] ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs |
0
0
0
|
2014-03-13 |
Ezequiel García |
|
New |
| [v2,1/6] clk: mvebu: Support Armada 380 SoC on the core divider clock |
0
0
0
|
2014-03-13 |
Ezequiel García |
|
New |
| fs: push sync_filesystem() down to the file system's remount_fs() |
0
0
0
|
2014-03-13 |
Theodore Ts'o |
|
Accepted |
| [v1,1/3] ARM: dts: am335x-bone: add support for beaglebone NAND cape |
0
0
0
|
2014-03-12 |
Nishanth Menon |
|
New |
| [v3,9/9] ARM: sunxi/dt: enable NAND on cubietruck board |
0
0
0
|
2014-03-12 |
Boris BREZILLON |
|
Changes Requested |
| [v3,8/9] ARM: dt/sunxi: add A20 NAND controller pin definitions |
0
0
0
|
2014-03-12 |
Boris BREZILLON |
|
Changes Requested |
| [v3,7/9] ARM: dt/sunxi: add NFC node to Allwinner A20 SoC |
0
0
0
|
2014-03-12 |
Boris BREZILLON |
|
Changes Requested |
| [v3,6/9] mtd: nand: add sunxi NFC dt bindings doc |
0
0
0
|
2014-03-12 |
Boris BREZILLON |
|
Changes Requested |
| [v3,5/9] mtd: nand: add sunxi NAND flash controller support |
0
0
0
|
2014-03-12 |
Boris BREZILLON |
|
Changes Requested |
| [v3,4/9] of: mtd: add documentation for the ONFI NAND timing mode property |
0
0
0
|
2014-03-12 |
Boris BREZILLON |
|
Changes Requested |
| [v3,3/9] of: mtd: add NAND timing mode retrieval support |
0
0
0
|
2014-03-12 |
Boris BREZILLON |
|
Changes Requested |
| [v3,2/9] mtd: nand: add ONFI timing mode to nand_timings converter |
0
0
0
|
2014-03-12 |
Boris BREZILLON |
|
Changes Requested |
| [v3,1/9] mtd: nand: define struct nand_timings |
0
0
0
|
2014-03-12 |
Boris BREZILLON |
|
New |
| [6/6] clk: mvebu: Update binding documentation for the core divider clock |
0
0
0
|
2014-03-12 |
Ezequiel Garcia |
|
New |
| [5/6] ARM: mvebu: Enable NAND controller in Armada 385-DB |
0
0
0
|
2014-03-12 |
Ezequiel Garcia |
|
New |
| [4/6] ARM: mvebu: Add support for NAND controller in Armada 38x SoC |
0
0
0
|
2014-03-12 |
Ezequiel Garcia |
|
New |
| [3/6] ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs |
0
0
0
|
2014-03-12 |
Ezequiel Garcia |
|
New |
| [2/6] ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs |
0
0
0
|
2014-03-12 |
Ezequiel Garcia |
|
New |
| [1/6] clk: mvebu: Support Armada 380 SoC on the core divider clock |
0
0
0
|
2014-03-12 |
Ezequiel Garcia |
|
New |
| axs_nand - add driver for NAND controller used on Synopsys AXS dev boards |
0
1
0
|
2014-03-12 |
Alexey Brodkin |
|
Superseded |
| [v1,3/3] ARM: dts: am437x-gp-evm: add support for parallel NAND flash |
0
0
0
|
2014-03-12 |
pekon gupta |
|
New |
| [v1,2/3] ARM: dts: am335x-boneblack: add support for beaglebone NAND cape |
0
0
0
|
2014-03-12 |
pekon gupta |
|
New |
| [v1,1/3] ARM: dts: am335x-bone: add support for beaglebone NAND cape |
0
0
0
|
2014-03-12 |
pekon gupta |
|
New |
| mtd: Add sysfs attr to expose ECC stats |
0
0
0
|
2014-03-11 |
Ezequiel Garcia |
|
Superseded |
| [2/2] mtd: gpmi-nand: use erased-page bitflip check |
0
0
0
|
2014-03-11 |
Brian Norris |
|
New |
| [1/2] mtd: nand: add erased-page bitflip correction |
0
0
0
|
2014-03-11 |
Brian Norris |
|
New |
| [v6,01/35] mtd: st_spi_fsm: Allocate resources and register with MTD framework |
0
0
0
|
2014-03-11 |
Lee Jones |
|
Superseded |
| [RFC] UBIFS: remove check for all(0xff) for empty pages |
0
0
0
|
2014-03-11 |
pekon gupta |
|
Rejected |
| mtd: nand: fix mention to CONFIG_MTD_NAND_ECC_BCH |
0
0
0
|
2014-03-11 |
Erico Nunes |
|
Accepted |
| mtd: m25p80: Calculate flash block protect bits based on number of sectors |
0
0
0
|
2014-03-08 |
Austin Boyle |
|
Superseded |
| [v2,1/1] mtd: mtd_blkdevs: handle REQ_FLUSH request and do explicit flush of writeback buffer |
0
0
0
|
2014-03-08 |
Roman Pen |
|
Accepted |
| UBIFS: add missing znode freeing in tcn_insert() |
0
0
0
|
2014-03-08 |
Florian Fainelli |
|
New |
| [v3] mtd: mtd_oobtest: generate consitent data for verification |
0
0
1
|
2014-03-07 |
Akinobu Mita |
|
Accepted |
| mtd: Kconfig: give the CFI command set version in prompt and help |
0
0
0
|
2014-03-07 |
Philippe De Muyter |
|
Accepted |
| [v3] mtd: mtdchar: allow mmap for ram devices in memory address space. |
0
0
0
|
2014-03-07 |
Philippe De Muyter |
|
New |
| [v2,4/4] mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ? |
0
0
0
|
2014-03-07 |
pekon gupta |
|
Superseded |
| [v2,3/4] mtd: nand: omap: add support for BCH16_ECC - NAND driver updates |
0
0
0
|
2014-03-07 |
pekon gupta |
|
Superseded |
| [v2,2/4] mtd: nand: omap: add support for BCH16_ECC - ELM driver updates |
0
0
0
|
2014-03-07 |
pekon gupta |
|
Superseded |
| [v2,1/4] mtd: nand: omap: add support for BCH16_ECC - GPMC driver updates |
0
0
0
|
2014-03-07 |
pekon gupta |
|
Superseded |
