| Set the fsl elbc ECCM according the settings in bootloader. |
2008-12-09 |
Jason Jin |
|
New |
| Issue in oamp nand driver with 32-bit reads in prefetch mode |
2009-12-23 |
vimal singh |
|
New |
| mtd/nand: max_retries off by one |
2009-06-04 |
roel kluin |
|
New |
| mtd: m25p80.c add support for non-JEDEC ID devices |
2008-10-13 |
hartleys |
|
New |
| [02/15] blktrans: remove mtd_blkcore_priv and switch to per device queue and thread |
2010-02-22 |
Maxim Levitsky |
|
New |
| [OneNAND] Standardising prints in onenand_base.c |
2009-10-01 |
Amul Saha |
|
New |
| sh: kfr2r09 board support - NAND flash |
2009-08-06 |
Magnus Damm |
|
New |
| [RESEND,v2] mtd: sh_flctl: add support for Renesas SuperH FLCTL |
2008-10-14 |
Yoshihiro Shimoda |
|
New |
| mtd: Fix compilation warnings in drivers/mtd/nand/cs553x_nand.c |
2008-10-14 |
Manish Katiyar |
|
New |
| [17/34] move mxcnd_remove to .exit.text |
2009-10-01 |
Uwe Kleine-König |
|
New |
| ubiupdatevol: make the -t parameter work again |
2008-12-17 |
Sebastian Siewior |
|
New |
| [RFC] remove -W from build process |
2008-12-17 |
Sebastian Siewior |
|
New |
| mtd: m25p80.c add support for non-JEDEC ID devices |
2008-10-19 |
hartleys |
|
New |
| mtd m25p80: add support for Macronix MX25L12805D |
2008-10-19 |
Lennert Buytenhek |
|
New |
| [2/3,MTD,OneNAND] Add write-while-program support |
2009-03-03 |
Kyungmin Park |
|
New |
| ubifs: ubifs_compress() returns void |
2008-10-17 |
Geert Uytterhoeven |
|
New |
| [20/20] fs: ubifs: world-writable debugfs dump_* files |
2011-02-04 |
Vasiliy Kulikov |
|
New |
| MTD: add missing put_chip() in cfi_intelext_reset() |
2009-10-23 |
Nicolas Pitre |
|
New |
| [for,2.6.31?,1/1] mtd: m25p80: fix null pointer dereference bug |
2009-08-06 |
Andrew Morton |
|
New |
| [v2.1,10/17] JFFS2: do not manipulate s_dirt directly |
2009-06-05 |
Artem Bityutskiy |
|
New |
| [V2,1/2] mtd/maps/mtd-ram: refactor probe and remove |
2009-06-05 |
Wolfram Sang |
|
New |
| [V2,2/2] mtd/maps/mtd-ram: add an of-platform driver |
2009-06-05 |
Wolfram Sang |
|
New |
| [3/6] mtd: cfi_probe: enable Auto Select Mode for SST39VF160x/39VF320x chips |
2010-02-20 |
Guillaume LECERF |
|
New |
| [1/8] jffs2: move jffs2_gcd_mtd threads to the new kthread API |
2009-08-06 |
Andrew Morton |
|
New |
| [4/6] mtd: cfi_probe: add support for SST 0x0701 vendorname |
2010-02-20 |
Guillaume LECERF |
|
New |
| [3/8] drivers/mtd/mtdcore.c: make symbols static |
2009-08-06 |
Andrew Morton |
|
New |
| [2/6] mtd: cfi_cmdset_0002: rename MANUFACTURER_* definitions to CFI_MFR_* and move them to cfi.h with similar definitions |
2010-02-20 |
Guillaume LECERF |
|
New |
| [2/8] mtd: SST25L (non JEDEC) SPI Flash driver |
2009-08-06 |
Andrew Morton |
|
New |
| [7/8] mtd: fix read buffer overflow |
2009-08-06 |
Andrew Morton |
|
New |
| [8/8] mtd: make onenand/generic.c more generic |
2009-08-06 |
Andrew Morton |
|
New |
| [6/6] mtd: cfi_cmdset_0002: add CFI detection for SST 39VF3201 chips |
2010-02-20 |
Guillaume LECERF |
|
New |
| [4/8] mtd: sst25l, fix lock imbalance |
2009-08-06 |
Andrew Morton |
|
New |
| [1/6] mtd: cfi_cmdset_0002: remove unused MANUFACTURER_{AMD, ATMEL} definitions |
2010-02-20 |
Guillaume LECERF |
|
New |
| mtd: nand: davinci: fix to use mask_ale from pdata |
2009-10-01 |
Hemant Pedanekar |
|
New |
| [5/6] mtd: cfi_probe: use P_ID_* definitions instead of hardcoded values |
2010-02-20 |
Guillaume LECERF |
|
New |
| [Repost] : NAND: Add panic_write for NAND flashes |
2009-10-01 |
Simon Kagstrom |
|
New |
| [MTD-UTILS] Incorrect loop condition |
2009-06-06 |
Jehan Bing |
|
New |
| mtd: cfi_cmdset_0002: add CFI detection for SST 39VF3201 chips |
2010-02-20 |
Guillaume LECERF |
|
New |
| mmotm 2009-08-06-00-30 uploaded (mtd) |
2009-08-07 |
Paul Mundt |
|
New |
| [2/6,MTD] sharpsl_nand: make drvdata non-static |
2008-10-16 |
Dmitry Eremin-Solenikov |
|
New |
| [6/6,MTD] sharpsl-nand: move registration to board code |
2008-10-16 |
Dmitry Eremin-Solenikov |
|
New |
| [MTD,NOR] cfi_cmdset_0002.c: Add Macronix CFI V1.0 TopBottom detection |
2008-10-17 |
Chris Moore |
|
New |
| [3/6,MTD] sharpsl_nand: move io addr to struct sharpsl_nand |
2008-10-16 |
Dmitry Eremin-Solenikov |
|
New |
| [1/6,MTD] sharpsl_nand: switch to driver model usage. |
2008-10-16 |
Dmitry Eremin-Solenikov |
|
New |
| [4/6,MTD] sharpsl-nand: cleanup partitions support |
2008-10-16 |
Dmitry Eremin-Solenikov |
|
New |
| [5/6,MTD] sharpsl-nand: use platform_data for model-specific values |
2008-10-16 |
Dmitry Eremin-Solenikov |
|
New |
| mtd: remove driver-core BUS_ID_SIZE |
2009-06-06 |
Atsushi Nemoto |
|
New |
| [revised] mtd: remove driver-core BUS_ID_SIZE |
2009-06-06 |
Atsushi Nemoto |
|
New |
| [2/2] mtd: cfi_cmdset_0002: use AMD standard command-set with Winbond flash chips |
2010-05-20 |
Guillaume LECERF |
|
New |
| [1/1] Fix ECC Correction bug for SMC ordering for NDFC driver. |
2009-08-25 |
fkan@amcc.com |
|
New |
| [MTD,NAND] : Correcting file name in the header section. |
2008-12-12 |
Manasa Gangaiah |
|
New |
| jffs2: Correct parameter names of jffs2_compress() in comments |
2008-10-17 |
Geert Uytterhoeven |
|
New |
| [JFFS2] Write buffer offset adjustment for NOR-ECC (Sibley) flash |
2008-10-17 |
Alexander Belyakov |
|
New |
| nand/s3c2410: s3c2410_nand_setrate(): use correct macros for 2412/2440 |
2009-06-07 |
Peter Korsgaard |
|
New |
| MTD: Remove pmcmsp-ramroot.c |
2009-05-02 |
Shane McDonald |
|
New |
| [2/3] mtd: m25p80: Rework probing/JEDEC code |
2009-09-22 |
Andrew Morton |
|
New |
| [3/3] mtd: m25p80: add support for CAT25xxx serial EEPROMs |
2009-09-22 |
Andrew Morton |
|
New |
| [1/3] mtd: m25p80: convert to device table matching |
2009-09-22 |
Andrew Morton |
|
New |
| [1/2] mtd: cfi_cmdset_0002: allow automatic loading of command set 0x0701 from cfi_cmdset_unknown() |
2010-05-20 |
Guillaume LECERF |
|
New |
| mtd: jedec_probe: add PSD4256G6V id |
2009-09-23 |
Mike Frysinger |
|
New |
| mtd-utils: Support 4096+64 page sizes. |
2010-05-18 |
Enric Balletbò i Serra |
|
New |
| Implement discard in RFD FTL |
2008-10-18 |
Sean Young |
|
New |
| [RFC] ubi: tmp hack for lstat |
2008-10-19 |
Sebastian Siewior |
|
New |
| mtd m25p80: add support for Macronix MX25L12805D |
2008-10-19 |
Lennert Buytenhek |
|
New |
| mtd/nand: s3c6400 support for s3c2410 driver |
2009-06-07 |
Peter Korsgaard |
|
New |
| mtd: sh_flctl: fix compile error |
2008-10-20 |
Yoshihiro Shimoda |
|
New |
| S3C24xx NAND: Correct tacls_max for S3C2410 |
2008-10-20 |
Harald Welte |
|
New |
| S3C24xx NAND: allow for faster timings |
2008-10-20 |
Harald Welte |
|
New |
| [REFERENCE,OneNAND] S3C64XX support |
2008-10-20 |
Kyungmin Park |
|
New |
| [6/8] LPDDR extended physmap driver to support LPDDR flash. (take 2) |
2008-10-20 |
Alexey Korolev |
|
New |
| [7/8] LPDDR Makefile and KConfig (take 2) |
2008-10-20 |
Alexey Korolev |
|
New |
| [1/8] LPDDR qinfo probing.(take 2) |
2008-10-20 |
Alexey Korolev |
|
New |
| [2/8] LPDDR QINFO records definitions (take 2) |
2008-10-20 |
Alexey Korolev |
|
New |
| [3/8] LPDDR PFOW definition (take 2) |
2008-10-20 |
Alexey Korolev |
|
New |
| [5/8] LPDDR added new pfow_base parameter (take 2) |
2008-10-20 |
Alexey Korolev |
|
New |
| [4/8] LPDDR Command set driver (take 2) |
2008-10-20 |
Alexey Korolev |
|
New |
| [8/8] LPDDR: new folder for lpddr (take 2) |
2008-10-20 |
Alexey Korolev |
|
New |
| [revised] mtd: remove driver-core BUS_ID_SIZE |
2009-06-08 |
David Woodhouse |
|
New |
| [3/3] mtd-nand: DaVinci: Add 4-bit ECC support for large page NAND chips |
2009-08-07 |
Andrew Morton |
|
New |
| [1/3] mtd-nand: add "page" parameter to all read_page/read_page_raw APIs |
2009-08-07 |
Andrew Morton |
|
New |
| [2/3] mtd-nand: add new ECC mode - ECC_HW_OOB_FIRST |
2009-08-07 |
Andrew Morton |
|
New |
| [MTD,NAND] OMAP2: remove duplicated #include |
2008-10-20 |
Huang Weiyi |
|
New |
| [PATH,MTD-UTILS] Return error if failure when reading from standard input |
2009-06-08 |
Jehan Bing |
|
New |
| OMAP OneNAND: add missing __devexit_p wrappers |
2009-04-29 |
Adrian Hunter |
|
New |
| [-,resend] m25p80 : add m45pe10 ids |
2009-04-28 |
Matthieu CASTET |
|
New |
| [2/2] powerpc: minimizing the configuration of linkstation_defconfig |
2009-04-28 |
Rogério Brito |
|
New |
| [2/2] powerpc: minimizing the configuration of linkstation_defconfig |
2009-04-28 |
Rogério Brito |
|
New |
| Nandwrite's behavior in case of write failure |
2009-06-08 |
Jehan Bing |
|
New |
| [1/2] powerpc: updating the linkstation_defconfig |
2009-04-28 |
Rogério Brito |
|
New |
| [resending-2,MTD,NAND] Add OMAP2 / OMAP3 NAND driver |
2009-04-30 |
Singh, Vimal |
|
New |
| [v3,2/3] omap3 nand: cleanup virtual address usages |
2010-05-18 |
Sukumar Ghorai |
|
New |
| [v3,1/3] omap3 gpmc: functionality enhancement |
2010-05-18 |
Sukumar Ghorai |
|
New |
| [JFFS2] Fix build failure with !CONFIG_JFFS2_FS_WRITEBUFFER |
2008-10-21 |
Steve Glendinning |
|
New |
| [2/2] OneNAND: OMAP: do not use DMA if oops in progress |
2009-10-01 |
Aaro Koskinen |
|
New |
| [30/44] mtd: h1910.c: use mtd_device_parse_register |
2011-06-07 |
Dmitry Eremin-Solenikov |
|
New |
| [v4,3/3] mtd-nand: DaVinci: Add 4-bit ECC support for large page NAND chips |
2009-08-07 |
nsnehaprabha@ti.com |
|
New |
| [MTD-UTILS] Bad block handling in nandwrite when reading from standard input |
2009-06-08 |
Jehan Bing |
|
New |
| [1/2] mtdoops: do not schedule work if we are going to die |
2009-10-01 |
Aaro Koskinen |
|
New |
| [v3,3/3] omap3 nand: fix issue in board file to detect nand |
2010-05-18 |
Sukumar Ghorai |
|
New |
| nandwrite: Pass Real Names as Arguments to perror |
2008-09-08 |
Grant Erickson |
|
Accepted |
