| [6/6] mtd: ofpart: add compatible check for child nodes |
2013-06-19 |
Wu, Josh |
|
New |
| [5/6] mtd: atmel_nand: enable Nand Flash Controller (NFC) write via sram |
2013-06-19 |
Wu, Josh |
|
New |
| [4/6] mtd: atmel_nand: enable Nand Flash Controller (NFC) read data via sram |
2013-06-19 |
Wu, Josh |
|
New |
| [3/6] mtd: atmel_nand: add Nand Flash Controller (NFC) support |
2013-06-19 |
Wu, Josh |
|
New |
| [2/6] mtd: atmel_nand: replace pmecc enable code with one function. |
2013-06-19 |
Wu, Josh |
|
New |
| [1/6] MTD: atmel_nand: use devm_xxx gpio kzalloc, gpio and ioremap |
2013-06-19 |
Wu, Josh |
|
New |
| [v5,3/3] mtd: devices: elm: Low power transition support |
2013-06-17 |
pekon gupta |
|
New |
| [v5,2/3] arm: gpmc: Low power transition support |
2013-06-17 |
pekon gupta |
|
New |
| [v5,1/3] ARM: OMAP2+: gpmc: Converts GPMC driver to pm_runtime capable |
2013-06-17 |
pekon gupta |
|
New |
| [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device |
2013-06-17 |
Poddar, Sourav |
|
New |
| [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device |
2013-06-17 |
Poddar, Sourav |
|
New |
| UBIFS failure & stable page writes |
2013-06-15 |
Mats Kärrman |
|
New |
| [4/4] mtd: gpmi: imx6: fix the wrong method for checking ready/busy |
2013-06-14 |
Huang Shijie |
|
New |
| [3/4] mtd: gpmi: scan two nand chips |
2013-06-14 |
Huang Shijie |
|
New |
| [2/4] mtd: gpmi: use DMA channel 0 for all the nand chips |
2013-06-14 |
Huang Shijie |
|
New |
| [1/4] mtd: gpmi: decouple the chip select from the DMA channel |
2013-06-14 |
Huang Shijie |
|
New |
| UBIFS failure & stable page writes |
2013-06-13 |
Prins Anton (ST-CO/ENG1.1) |
|
New |
| [v4,3/3] mtd: devices: elm: Low power transition support |
2013-06-12 |
pekon gupta |
|
New |
| [v4,2/3] arm: gpmc: Low power transition support |
2013-06-12 |
pekon gupta |
|
New |
| [v4,1/3] arm: gpmc: Converts GPMC driver to pm_runtime capable |
2013-06-12 |
pekon gupta |
|
New |
| [v4,3/3] mtd: devices: elm: Low power transition support |
2013-06-12 |
pekon gupta |
|
New |
| [v4,2/3] arm: gpmc: Low power transition support |
2013-06-12 |
pekon gupta |
|
New |
| [v4,1/3] arm: gpmc: Converts GPMC driver to pm_runtime capable |
2013-06-12 |
pekon gupta |
|
New |
| UBIFS failure & stable page writes |
2013-06-12 |
Prins Anton (ST-CO/ENG1.1) |
|
New |
| UBIFS failure & stable page writes |
2013-06-12 |
Adrian Hunter |
|
New |
| [6/6] mtd: ofpart: add compatible check for child nodes |
2013-06-10 |
Wu, Josh |
|
New |
| [5/6] mtd: atmel_nand: enable Nand Flash Controller (NFC) write via sram |
2013-06-10 |
Wu, Josh |
|
New |
| [4/6] mtd: atmel_nand: enable Nand Flash Controller (NFC) read data via sram |
2013-06-10 |
Wu, Josh |
|
New |
| [3/6] mtd: atmel_nand: add Nand Flash Controller (NFC) support |
2013-06-10 |
Wu, Josh |
|
New |
| [2/6] mtd: atmel_nand: replace pmecc enable code with one function. |
2013-06-10 |
Wu, Josh |
|
New |
| [1/6] MTD: atmel_nand: use devm_xxx gpio kzalloc, gpio and ioremap |
2013-06-10 |
Wu, Josh |
|
New |
| [v2] mtd: orion_nand: Improve error handling in orion_nand_probe |
2013-06-10 |
Emil Goode |
|
New |
| mtd: orion_nand: convert printk to dev_* |
2013-06-09 |
Andy Shevchenko |
|
New |
| mtd: orion_nand: Improve error handling in orion_nand_probe |
2013-06-09 |
Emil Goode |
|
New |
| drivers/mtd/devices/bcm47xxsflash.c: correct argument to kfree |
2013-06-08 |
Julia Lawall |
|
New |
| UBIFS: fix error return code in ubifs_remount_rw() and ubifs_fill_super() |
2013-06-07 |
Wei Yongjun |
|
New |
| [3/4] mtd: onenand: samsung: Release memory after incorrect return/goto |
2013-06-04 |
Joe Perches |
|
New |
| [3/3] mtd: cfi_cmdset_0002: increase do_write_buffer() timeout |
2013-06-04 |
Brian Norris |
|
New |
| [2/3] mtd: cfi_cmdset_0002: use msecs_to_jiffies() macro |
2013-06-04 |
Brian Norris |
|
New |
| [1/3] mtd: cfi_cmdset_0002: remove unnecessary initialization |
2013-06-04 |
Brian Norris |
|
New |
| [v2] mtd: Add LED trigger support "mtd-disk" to indicate activity |
2013-06-02 |
Jens Renner (EFE) |
|
New |
| mtd: mtdswap: replace strict_strtoul() with kstrtoul() |
2013-06-01 |
Jingoo Han |
|
New |
| [02/15] mtd: omap2: allow bulding as a module |
2013-05-31 |
Arnd Bergmann |
|
New |
| mtd: docg4: fix status polling loop |
2013-05-31 |
Mike Dunn |
|
New |
| MTD: atmel_nand: using a stronger ECC is not dangerous |
2013-05-31 |
Richard Genoud |
|
New |
| mtd: lantiq-flash: Convert to devm_kzalloc |
2013-05-30 |
Emil Goode |
|
New |
| [RESEND,2/2] mtd: bcm47: convert to module_platform_driver instead of init/exit |
2013-05-30 |
Libo Chen |
|
New |
| [RESEND,1/2] mtd: bcm47: convert kzalloc to avoid invalid access |
2013-05-30 |
Libo Chen |
|
New |
| mtd: fsl_ifc_nand: fix eccstrength for ecc8 |
2013-05-28 |
Scott Wood |
|
New |
| [v4,3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm |
2013-05-28 |
pekon gupta |
|
New |
| [v4,2/3] ARM: dts: AM33XX: update GPMC node |
2013-05-28 |
pekon gupta |
|
New |
| [v4,1/3] ARM: dts: AM33XX: Add ELM node |
2013-05-28 |
pekon gupta |
|
New |
| [RFC] UBIFS: NFS exportfs support |
2013-05-28 |
deng.chao1@zte.com.cn |
|
New |
| [RFC] mtd: nand-gpio: Prepare driver to support multichip devices |
2013-05-28 |
Alexander Shiyan |
|
New |
| UBI: Fastmap: Fix memory leak |
2013-05-27 |
Thomas Weber |
|
New |
| mtd: m25p80: add support for the Spansion s25fl008k chip |
2013-05-27 |
Kuninori Morimoto |
|
New |
| mtd: Add LED trigger support "mtd-disk" to indicate activity |
2013-05-24 |
Jens Renner (EFE) |
|
New |
| mtd: Correct 4-byte address mode enable |
2013-05-23 |
Jonas Andersson |
|
New |
| Re: Re: Re: [PATCH] UBI: fix memory leak when use fastmap |
2013-05-23 |
wang.bo116@zte.com.cn |
|
New |
| mtd: nand: use platform_{get,set}_drvdata() |
2013-05-23 |
Jingoo Han |
|
New |
| mtd: maps: use platform_{get,set}_drvdata() |
2013-05-23 |
Jingoo Han |
|
New |
| [v2,4/4,RESEND] mtd: cfi_cmdset_0002: Add support for locking OTP memory |
2013-05-23 |
Christian Riesch |
|
New |
| [v2,3/4,RESEND] mtd: cfi_cmdset_0002: Add support for writing OTP memory |
2013-05-23 |
Christian Riesch |
|
New |
| [v2,2/4,RESEND] mtd: cfi_cmdset_0002: Invalidate cache after entering/exiting OTP memory |
2013-05-23 |
Christian Riesch |
|
New |
| [v2,1/4,RESEND] mtd: cfi_cmdset_0002: Add support for reading OTP |
2013-05-23 |
Christian Riesch |
|
New |
| [RESEND] mtd: mtdchar: Exit write loop when hitting end of OTP memory |
2013-05-23 |
Christian Riesch |
|
New |
| [RESEND] mtd: refactor call to request_module |
2013-05-22 |
Kees Cook |
|
New |
| [RFC] mtd: bcm47xxsflash: writing support |
2013-05-22 |
Rafał Miłecki |
|
New |
| [RESEND] mtd: fix kfree bcm47xxsflash |
2013-05-22 |
Libo Chen |
|
New |
| [v6,05/10,fix2] mtd: get the ECC info from the Extended Parameter Page |
2013-05-22 |
Huang Shijie |
|
New |
| mtd: bcm47xxsflash: implement erasing support |
2013-05-21 |
Rafał Miłecki |
|
New |
| [v6,05/10,fix] mtd: get the ECC info from the Extended Parameter Page |
2013-05-20 |
Huang Shijie |
|
New |
| ubi-utils: Add ubiblkvol tool |
2013-05-18 |
Ezequiel Garcia |
|
New |
| [v3,1/1] ubi: Introduce block devices for UBI volumes |
2013-05-18 |
Ezequiel Garcia |
|
New |
| [4/4,v2] ARM: OMAP2+: updated ECC scheme attributes for omap2-nand DT |
2013-05-17 |
pekon gupta |
|
New |
| [3/4,v2] mtd:nand:omap2: updated support for BCH4 ECC scheme |
2013-05-17 |
pekon gupta |
|
New |
| [2/4,v2] ARM: OMAP2+: cleaned-up DT support of various ECC schemes |
2013-05-17 |
pekon gupta |
|
New |
| [1/4,v2] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe |
2013-05-17 |
pekon gupta |
|
New |
| [v2,4/4] mtd: atmel_nand: enable Nand Flash Controller (NFC) write via sram |
2013-05-17 |
Wu, Josh |
|
New |
| [v2,3/4] mtd: atmel_nand: enable Nand Flash Controller (NFC) read data via sram |
2013-05-17 |
Wu, Josh |
|
New |
| [v2,2/4] mtd: atmel_nand: add Nand Flash Controller (NFC) support |
2013-05-17 |
Wu, Josh |
|
New |
| [v2,1/4] mtd: atmel_nand: replace pmecc enable code with one function. |
2013-05-17 |
Wu, Josh |
|
New |
| [-next] UBI: fix error return code in ubi_init() |
2013-05-17 |
Wei Yongjun |
|
New |
| [v6,10/10] mtd: gpmi: set the BCH's geometry with the ecc info |
2013-05-17 |
Huang Shijie |
|
New |
| [v6,09/10] mtd: add the ecc info for some full-id nand chips |
2013-05-17 |
Huang Shijie |
|
New |
| [v6,08/10] mtd: parse out the ECC info for the full-id nand chips |
2013-05-17 |
Huang Shijie |
|
New |
| [v6,07/10] mtd: add ECC info for nand_flash_dev{} |
2013-05-17 |
Huang Shijie |
|
New |
| [v6,06/10] mtd: replace the hardcode with the onfi_feature() |
2013-05-17 |
Huang Shijie |
|
New |
| [v6,05/10] mtd: get the ECC info from the Extended Parameter Page |
2013-05-17 |
Huang Shijie |
|
New |
| [v6,04/10] mtd: add a helper to get the supported features for ONFI nand |
2013-05-17 |
Huang Shijie |
|
New |
| [v6,03/10] mtd: add data structures for Extended Parameter Page |
2013-05-17 |
Huang Shijie |
|
New |
| [v6,02/10] mtd: get the ECC info from the parameter page for ONFI nand |
2013-05-17 |
Huang Shijie |
|
New |
| [v6,01/10] mtd: add datasheet's ECC information to nand_chip{} |
2013-05-17 |
Huang Shijie |
|
New |
| [RESEND,v2] mtd: nand: nand_bbt: scan for next free bbt block if writing bbt fails |
2013-05-16 |
Jeff Westfahl |
|
New |
| [RESEND] mtd: nand: nand_bbt: scan for next free bbt block if writing bbt fails |
2013-05-16 |
Jeff Westfahl |
|
New |
| [RESEND] mtd: nand: nand_bbt: scan for next free bbt block if writing bbt fails |
2013-05-16 |
Jeff Westfahl |
|
New |
| [12/33] drivers/mtd/nand: don't check resource with devm_ioremap_resource |
2013-05-16 |
Wolfram Sang |
|
New |
| mtd: m25p80: add support for the Spansion s25fl008k chip |
2013-05-16 |
Kuninori Morimoto |
|
New |
| [2/2] ARM: OMAP2+: cleaned-up DT support of various ECC schemes |
2013-05-16 |
pekon gupta |
|
New |
| [1/2] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe |
2013-05-16 |
pekon gupta |
|
New |
