| mtd: m25p80: Fix 4 byte addressing mode for Micron devices. |
2013-09-19 |
Brian Norris |
|
New |
| [v3] mtd: atmel_nand: use minimum ecc requirements of nand: ecc_{strength,step}_ds |
2013-09-18 |
Brian Norris |
|
New |
| [v3] mtd: atmel_nand: use minimum ecc requirements of nand: ecc_{strength, step}_ds |
2013-09-18 |
Wu, Josh |
|
New |
| [v2,2/2] mtd: atmel_nand: add MODULE_DEVICE_TABLE for nfc driver |
2013-09-18 |
Wu, Josh |
|
New |
| [v2,1/2] mtd: atmel_nand: remove #if defined(CONFIG_OF) around OF-specific code |
2013-09-18 |
Wu, Josh |
|
New |
| ubi: attach: do not return -EINVAL if the mtd->numeraseregions is 1 |
2013-09-18 |
Huang Shijie |
|
New |
| [v3,0/8] Add the Quadspi driver for vf610-twr |
2013-09-17 |
Poddar, Sourav |
|
New |
| mtd: m25p80: Fix 4 byte addressing mode for Micron devices. |
2013-09-17 |
Elie De Brauwer |
|
New |
| mtd: nand: fix memory leak in ONFI extended parameter page |
2013-09-17 |
Brian Norris |
|
New |
| [GIT,PULL] UBI changes for 3.12-rc1 |
2013-09-16 |
Artem Bityutskiy |
|
New |
| [GIT,PULL] UBIFS changes for 3.12-rc1 |
2013-09-16 |
Artem Bityutskiy |
|
New |
| mtd: bcm47xxpart: detect "factory" partition |
2013-09-15 |
Rafał Miłecki |
|
New |
| [V2] mtd: bcm47xxpart: detect block aligned Squashfs partition |
2013-09-13 |
Rafał Miłecki |
|
New |
| mtd: bcm47xxpart: detect Squashfs partition |
2013-09-13 |
Rafał Miłecki |
|
New |
| [v2] mtd: atmel_nand: use the common function to get ecc info |
2013-09-13 |
Wu, Josh |
|
New |
| mtd: nand: cleanup ONFI printed errors, warnings |
2013-09-12 |
Ezequiel Garcia |
|
New |
| [v6,4/4] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt |
2013-09-12 |
pekon gupta |
|
New |
| [v6,3/4] mtd:nand:omap2: updated support for BCH4 ECC scheme |
2013-09-12 |
pekon gupta |
|
New |
| [v6,2/4] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe |
2013-09-12 |
pekon gupta |
|
New |
| [v6,1/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes |
2013-09-12 |
pekon gupta |
|
New |
| mtd: nand: cleanup ONFI printed errors, warnings |
2013-09-11 |
Brian Norris |
|
New |
| [RFC/PATCH,v2] mtd: nand: pxa3xx: Remove redundant device probing |
2013-09-10 |
Ezequiel Garcia |
|
New |
| [2/2] mtd: Fix the behavior of otp write if there is not enough room for data |
2013-09-10 |
Christian Riesch |
|
New |
| [1/2] mtd: Add a retlen parameter to _get_{fact, user}_prot_info |
2013-09-10 |
Christian Riesch |
|
New |
| mtd: plat-ram: Remove casting the return value which is a void pointer |
2013-09-09 |
Jingoo Han |
|
New |
| [RFC/PATCH] mtd: nand: pxa3xx: Remove redundant device probing |
2013-09-06 |
Ezequiel Garcia |
|
New |
| [12/12] mtd: lpddr_cmds: make function static |
2013-09-04 |
Brian Norris |
|
New |
| [11/12] mtd: onenand: remove unused variable assignments |
2013-09-04 |
Brian Norris |
|
New |
| [10/12] mtd: nand: remove obsolete 'ecclayout' field |
2013-09-04 |
Brian Norris |
|
New |
| [09/12] mtd: onenand: remove redundant offset check |
2013-09-04 |
Brian Norris |
|
New |
| [08/12] mtd: nand: don't print ONFI buswidth errors unless we need to |
2013-09-04 |
Brian Norris |
|
New |
| [07/12] mtd: nand: return failure when failing to get ECC from ONFI |
2013-09-04 |
Brian Norris |
|
New |
| [06/12] mtd: denali: make init function static |
2013-09-04 |
Brian Norris |
|
New |
| [05/12] mtd: dataflash: remove unused field |
2013-09-04 |
Brian Norris |
|
New |
| [04/12] mtd: nand: stop exporting nand_default_bbt |
2013-09-04 |
Brian Norris |
|
New |
| [03/12] mtd: nandsim: don't call nand_default_bbt() directly |
2013-09-04 |
Brian Norris |
|
New |
| [02/12] mtd: nand: lpc32xx_slc: don't call nand_default_bbt directly |
2013-09-04 |
Brian Norris |
|
New |
| [01/12] nand: docg4: use nand_base's default BBT scan |
2013-09-04 |
Brian Norris |
|
New |
| mtd: m25p80: Add support for Micron N25Q512A memory |
2013-09-04 |
Priyanka Jain |
|
New |
| [v2] mtd: m25p80: Add support for ESMT F25L32PA |
2013-09-03 |
Flávio Silveira |
|
New |
| [2/2] mtd: atmel_nand: add MODULE_DEVICE_TABLE for nfc driver |
2013-09-03 |
Wu, Josh |
|
New |
| [1/2] mtd: atmel_nand: remove unneeded ifdef CONFIG_OF |
2013-09-03 |
Wu, Josh |
|
New |
| of_mtd: Add no-op stubs to support CONFIG_OF=n |
2013-09-03 |
Ezequiel Garcia |
|
New |
| mtd: tests: make a separate mtd_test.ko module |
2013-09-02 |
Akinobu Mita |
|
New |
| Staging: MTD: Micron SPINAND Driver support |
2013-09-02 |
Kamlakant Patel |
|
New |
| drivers: mtd: remove '__init' from phram_param_call() and ubi_mtd_param_parse() |
2013-09-02 |
Chen Gang |
|
New |
| mtd-utils: integck: add support for volume specific power-cut test |
2013-09-01 |
Mats Kärrman |
|
New |
| spi: quad: fix the name of DT property |
2013-09-01 |
王宇航 |
|
New |
| mtd: atmel_nand: fix the warning when CONFIG_OF is not defined |
2013-08-31 |
Ezequiel Garcia |
|
New |
| gpmi-nand driver and jffs2 support |
2013-08-31 |
Huang Shijie |
|
New |
| [RFC] Add ESMT F25L32PA Flashchip Support |
2013-08-30 |
Flávio Silveira |
|
New |
| [V2,2/2] spi: dual and quad support(miss "return") |
2013-08-30 |
王宇航 |
|
New |
| [2/2] Miss return in patch: commit id:f477b7fb13df2b843997559ff34e87d054ba6538 |
2013-08-30 |
王宇航 |
|
New |
| [1/2] spi: dual and quad support(add single macro) |
2013-08-30 |
王宇航 |
|
New |
| [v3,8/8] ARM: dts: vf610-twr: Add SPI NOR support |
2013-08-30 |
Huang Shijie |
|
New |
| [v3,7/8] ARM: dts: vf610: change the PAD values for Quadspi |
2013-08-30 |
Huang Shijie |
|
New |
| [v3,6/8] Documentation: add the binding file for Quadspi driver |
2013-08-30 |
Huang Shijie |
|
New |
| [v3,5/8] spi: Add Freescale QuadSpi driver |
2013-08-30 |
Huang Shijie |
|
New |
| [v3,4/8] mtd: m25p80: add the DDR quad-read support |
2013-08-30 |
Huang Shijie |
|
New |
| [v3,3/8] mtd: m25p80: add the quad-read support |
2013-08-30 |
Huang Shijie |
|
New |
| [v3,2/8] mtd: m25p80: add support for Spansion s25fl128s chip |
2013-08-30 |
Huang Shijie |
|
New |
| [v3,1/8] mtd: m25p80: move the spi-nor commands to a header |
2013-08-30 |
Huang Shijie |
|
New |
| [2/2] mtd: cfi_cmdset_0002: 65 nm changes |
2013-08-29 |
Hoyler, Gernot |
|
New |
| [1/2] mtd: cfi_cmdset_0002: write buffer cleanup |
2013-08-29 |
Hoyler, Gernot |
|
New |
| [V2] spi: dual and quad support(add single macro) |
2013-08-29 |
王宇航 |
|
New |
| mtd: nand: hack ONFI for non-power-of-2 dimensions |
2013-08-28 |
Brian Norris |
|
New |
| spi: dual and quad support(add single macro) |
2013-08-28 |
王宇航 |
|
New |
| [V2,4/4] mtd: gpmi: imx6: fix the wrong method for checking ready/busy |
2013-08-27 |
Huang Shijie |
|
New |
| [V2,3/4] mtd: gpmi: scan two nand chips |
2013-08-27 |
Huang Shijie |
|
New |
| [V2,2/4] mtd: gpmi: use DMA channel 0 for all the nand chips |
2013-08-27 |
Huang Shijie |
|
New |
| [V2,1/4] mtd: gpmi: decouple the chip select from the DMA channel |
2013-08-27 |
Huang Shijie |
|
New |
| [V2,2/2] spi: dual and quad support(device tree) |
2013-08-27 |
王宇航 |
|
New |
| [V2,1/2] spi: dual and quad support(device tree) |
2013-08-27 |
王宇航 |
|
New |
| UBI: fix refill_wl_user_pool() |
2013-08-26 |
Richard Weinberger |
|
New |
| [v3,10/10] mtd: mtd-abi: add a helper to detect the nand type |
2013-08-26 |
Huang Shijie |
|
New |
| [v3,09/10] mtd: add a helper to detect the nand type |
2013-08-26 |
Huang Shijie |
|
New |
| [v3,08/10] mtd: add MTD_MLCNANDFLASH case for mtd_type_show() |
2013-08-26 |
Huang Shijie |
|
New |
| [v3,07/10] jffs2: do not support the MLC nand |
2013-08-26 |
Huang Shijie |
|
New |
| [v3,06/10] mtd: fix the wrong mtd->type for nand chip |
2013-08-26 |
Huang Shijie |
|
New |
| [v3,05/10] mtd: add more comment for MTD_NANDFLASH/MTD_MLCNANDFLASH |
2013-08-26 |
Huang Shijie |
|
New |
| [v3,04/10] mtd: gpmi: rewrite the gpmi_ecc_write_oob() to support the jffs2 |
2013-08-26 |
Huang Shijie |
|
New |
| [v3,03/10] mtd: print out the cell information for nand chip |
2013-08-26 |
Huang Shijie |
|
New |
| [v3,02/10] mtd: set the cell information for ONFI nand |
2013-08-26 |
Huang Shijie |
|
New |
| [v3,01/10] mtd: nand: rename the cellinfo to bits_per_cell |
2013-08-26 |
Huang Shijie |
|
New |
| [JFFS2] The patch "jffs2: Fix lock acquisition order bug in jffs2_write_begin" introduces another dead lock bug. |
2013-08-26 |
deng.chao1@zte.com.cn |
|
New |
| [2/2] spi: dual and quad support(device tree) |
2013-08-26 |
王宇航 |
|
New |
| [1/2] spi: dual and quad support(device tree) |
2013-08-26 |
王宇航 |
|
New |
| [v2,8/8] ARM: dts: vf610-twr: Add SPI NOR support |
2013-08-26 |
Huang Shijie |
|
New |
| [v2,7/8] ARM: dts: vf610: change the PAD values for Quadspi |
2013-08-26 |
Huang Shijie |
|
New |
| [v2,6/8] Documentation: add the binding file for Quadspi driver |
2013-08-26 |
Huang Shijie |
|
New |
| [v2,5/8] spi: Add Freescale QuadSpi driver |
2013-08-26 |
Huang Shijie |
|
New |
| [v2,4/8] mtd: m25p80: add the DDR quad-read support |
2013-08-26 |
Huang Shijie |
|
New |
| [v2,3/8] mtd: m25p80: add the quad-read support |
2013-08-26 |
Huang Shijie |
|
New |
| [v2,2/8] mtd: m25p80: add support for Spansion s25fl128s chip |
2013-08-26 |
Huang Shijie |
|
New |
| [v2,1/8] mtd: m25p80: move the spi-nor commands to a header |
2013-08-26 |
Huang Shijie |
|
New |
| [RFC] mtd: plat_nand: add further DT bindings and documentation |
2013-08-24 |
Alexander Clouter |
|
New |
| Fastmap and Atmel sam-ba |
2013-08-23 |
Richard Weinberger |
|
New |
| mtd: ndfc: silence an underflow static checker warning |
2013-08-23 |
Dan Carpenter |
|
New |
| mtd cs553x_nand: use kzalloc() instead of memset |
2013-08-23 |
Dan Carpenter |
|
New |
| [-next] mtd: ofpart: use for_each_child_of_node() macro |
2013-08-23 |
Wei Yongjun |
|
New |
