Patchwork Linux MTD development

login
register
mail settings

Incoming patches

« Previous 1 2 3 4 5 6 7 8 9 10 ... 13 14 Next »
Filters: State = Action Required remove filter    |    Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[v2,4/8] mtd: m25p80: add the DDR quad-read support 0 0 0 2013-08-26 Huang Shijie New
[v2,3/8] mtd: m25p80: add the quad-read support 0 0 0 2013-08-26 Huang Shijie New
[v2,2/8] mtd: m25p80: add support for Spansion s25fl128s chip 0 0 0 2013-08-26 Huang Shijie New
[v2,1/8] mtd: m25p80: move the spi-nor commands to a header 0 0 0 2013-08-26 Huang Shijie New
[append,fix] mtd: mtd-abi: add a helper to detect the nand type 0 0 0 2013-08-20 Huang Shijie New
[v2,append] mtd: mtd-abi: add a helper to detect the nand type 0 0 0 2013-08-19 Huang Shijie New
[V1,4/5] spi: Add Freescale QuadSpi driver 0 0 0 2013-08-19 Huang Shijie New
[V1,3/5] mtd: m25p80: add the quad-read support 0 0 0 2013-08-19 Huang Shijie New
[V1,2/5] mtd: m25p80: add support for Spansion s25fl128s chip 0 0 0 2013-08-19 Huang Shijie New
[V1,1/5] mtd: m25p80: move the spi-nor commands to a header 0 0 0 2013-08-19 Huang Shijie New
[v2,9/9] mtd: add a helper to detect the nand type 0 0 0 2013-08-19 Huang Shijie New
[v2,7/9] jffs2: init the ret with -EINVAL 0 0 0 2013-08-19 Huang Shijie New
[v2,6/9] mtd: fix the wrong mtd->type for nand chip 0 0 0 2013-08-19 Huang Shijie New
[v2,5/9] mtd: add more comment for MTD_NANDFLASH/MTD_MLCNANDFLASH 0 0 0 2013-08-19 Huang Shijie New
[v2,4/9] mtd: gpmi: rewrite the gpmi_ecc_write_oob() to support the jffs2 0 0 0 2013-08-19 Huang Shijie New
[v2,3/9] mtd: print out the cell information for nand chip 0 0 0 2013-08-19 Huang Shijie New
[v2,1/9] mtd: nand: rename the cellinfo to bits_per_cell 0 0 0 2013-08-19 Huang Shijie New
[v4,6/6] mtd: update the ABI document about the ecc step size 0 0 0 2013-08-16 Huang Shijie New
[v4,5/6] mtd: gpmi: remove the nand_scan() 0 0 0 2013-08-16 Huang Shijie New
[v4,4/6] mtd: set ONFI nand's default hooks in nand_set_defaults() 0 0 0 2013-08-16 Huang Shijie New
[mtd-www:] nand-data: add four Toshiba nand chips 1 0 0 2013-08-13 Huang Shijie New
[09/10] mtd: add more information for the MTD_NANDFLASH case 0 0 0 2013-08-12 Huang Shijie New
[08/10] mtd: add MTD_MLCNANDFLASH case for mtd_type_show() 0 0 0 2013-08-12 Huang Shijie New
[07/10] jffs2: init the ret with -EINVAL 0 0 0 2013-08-12 Huang Shijie New
[05/10] mtd: add more comment for MTD_NANDFLASH/MTD_MLCNANDFLASH 0 0 0 2013-08-12 Huang Shijie New
[04/10] mtd: gpmi: rewrite the gpmi_ecc_write_oob() to support the jffs2 0 0 0 2013-08-12 Huang Shijie New
[03/10] mtd: print out the cell information for nand chip 0 0 0 2013-08-12 Huang Shijie New
[01/10] mtd: set the cell information for ONFI nand 0 0 0 2013-08-12 Huang Shijie New
[v3,6/6] mtd: update the ABI document about the ecc step 0 0 0 2013-08-12 Huang Shijie New
[v3,3/6] mtd: set the ecc step size for master/slave mtd_info 0 0 0 2013-08-12 Huang Shijie New
[v3,2/6] mtd: add a new sys node to show the ecc step size 0 0 0 2013-08-12 Huang Shijie New
[v3,1/6] mtd: add a new field to mtd_info{} 0 0 0 2013-08-12 Huang Shijie New
[4/4] mtd: gpmi: imx6: fix the wrong method for checking ready/busy 0 0 0 2013-06-14 Huang Shijie New
[3/4] mtd: gpmi: scan two nand chips 0 0 0 2013-06-14 Huang Shijie New
[v6,05/10,fix] mtd: get the ECC info from the Extended Parameter Page 1 0 0 2013-05-20 Huang Shijie New
[v6,09/10] mtd: add the ecc info for some full-id nand chips 0 0 0 2013-05-17 Huang Shijie New
[v6,06/10] mtd: replace the hardcode with the onfi_feature() 0 0 0 2013-05-17 Huang Shijie New
[v6,05/10] mtd: get the ECC info from the Extended Parameter Page 1 0 0 2013-05-17 Huang Shijie New
[v6,04/10] mtd: add a helper to get the supported features for ONFI nand 0 0 0 2013-05-17 Huang Shijie New
[v6,03/10] mtd: add data structures for Extended Parameter Page 1 0 0 2013-05-17 Huang Shijie New
[v5,fix] mtd: gpmi: set the BCH's geometry with the ecc info 0 0 0 2013-05-16 Huang Shijie New
[v5,fix] mtd: get the ECC info from the Extended Parameter Page 1 0 0 2013-05-16 Huang Shijie New
[v2,append] mtd: update the ABI document about the ecc step 0 0 0 2013-05-16 Huang Shijie New
[v5,11/11] mtd: gpmi: set the BCH's geometry with the ecc info 0 0 0 2013-05-15 Huang Shijie New
[v5,10/11] mtd: add the ecc info for some full-id nand chips 0 0 0 2013-05-15 Huang Shijie New
[v2,4/4] mtd: gpmi: update the ecc step size for mtd_info{} 0 0 0 2013-05-15 Huang Shijie New
[v2,3/4] mtd: set the ecc step size for master/slave mtd_info 0 0 0 2013-05-15 Huang Shijie New
[v2,2/4] mtd: add a new sys node to show the ecc step size 0 0 0 2013-05-15 Huang Shijie New
[v2,1/4] mtd: add a new field to mtd_info{} 0 0 0 2013-05-15 Huang Shijie New
[v5,09/11] mtd: parse out the ECC info for the full-id nand chips 0 0 0 2013-05-15 Huang Shijie New
[v5,08/11] mtd: add ECC info for nand_flash_dev{} 0 0 0 2013-05-15 Huang Shijie New
[v5,07/11] mtd: replace the hardcode with the onfi_feature() 0 0 0 2013-05-15 Huang Shijie New
[v5,06/11] mtd: get the ECC info from the Extended Parameter Page 1 0 0 2013-05-15 Huang Shijie New
[v5,05/11] mtd: add a helper to get the supported features for ONFI nand 0 0 0 2013-05-15 Huang Shijie New
[v5,04/11] mtd: add data structures for Extended Parameter Page 1 0 0 2013-05-15 Huang Shijie New
[v5,03/11] mtd: get the ECC info from the parameter page for ONFI nand 0 0 0 2013-05-15 Huang Shijie New
[v5,02/11] mtd: increase max OOB size to 744 0 0 0 2013-05-15 Huang Shijie New
[v5,01/11] mtd: add datasheet's ECC information to nand_chip{} 0 0 0 2013-05-15 Huang Shijie New
[4/4] mtd: gpmi: update the ecc step size for mtd_info{} 0 0 0 2013-05-03 Huang Shijie New
[3/4] mtd: set the ecc step size for master/slave mtd_info 0 0 0 2013-05-03 Huang Shijie New
[2/4] mtd: add a new sys node to show the ecc step size 0 0 0 2013-05-03 Huang Shijie New
[1/4] mtd: add a new field to mtd_info{} 0 0 0 2013-05-03 Huang Shijie New
[V4,9/9] mtd: gpmi: set the BCH's geometry with the ecc info 0 0 0 2013-04-26 Huang Shijie New
[V4,8/9] mtd: add the ecc info for some full-id nand chips 0 0 0 2013-04-26 Huang Shijie New
[V4,7/9] mtd: parse out the ECC info for the full-id nand chips 0 0 0 2013-04-26 Huang Shijie New
[V4,6/9] mtd: add ECC info for nand_flash_dev{} 0 0 0 2013-04-26 Huang Shijie New
[V4,5/9] mtd: replace the hardcode with the onfi_feature() 0 0 0 2013-04-26 Huang Shijie New
[V4,4/9] mtd: get the ECC info from the Extended Parameter Page 1 0 0 2013-04-26 Huang Shijie New
[V4,3/9] mtd: add a helper to get the supported features for ONFI nand 0 0 0 2013-04-26 Huang Shijie New
[V4,2/9] mtd: add data structures for Extended Parameter Page 1 0 0 2013-04-26 Huang Shijie New
[V4,1/9] mtd: add more comment for ecc_strength/ecc_size 0 0 0 2013-04-26 Huang Shijie New
[V3,9/9] mtd: gpmi: set the BCH's geometry with the ecc info 0 0 0 2013-04-23 Huang Shijie New
[V3,8/9] mtd: add the ecc info for some full-id nand chips 0 0 0 2013-04-23 Huang Shijie New
[V3,7/9] mtd: parse out the ECC info for the full-id nand chips 0 0 0 2013-04-23 Huang Shijie New
[V3,6/9] mtd: add a new field for ecc info in the nand_flash_dev{} 0 0 0 2013-04-23 Huang Shijie New
[V3,5/9] mtd: replace the hardcode with the onfi_feature() 0 0 0 2013-04-23 Huang Shijie New
[V3,4/9] mtd: get the ECC info from the Extended Parameter Page 0 0 0 2013-04-23 Huang Shijie New
[V3,2/9] mtd: add data structures for Extended Parameter Page 0 0 0 2013-04-23 Huang Shijie New
[V3,1/9] mtd: add more comment for ecc_strength/ecc_size 0 0 0 2013-04-23 Huang Shijie New
[v2] mtd: replace the hardcode with the onfi_feature() 0 0 0 2013-04-22 Huang Shijie New
[v2,8/8] mtd: gpmi: set the BCH's geometry with the ecc info 0 0 0 2013-04-22 Huang Shijie New
[v2,6/8] mtd: parse out the ECC info for the full-id nand chips 0 0 0 2013-04-22 Huang Shijie New
[v2,5/8] mtd: add a new field for ecc info in the nand_flash_dev{} 0 0 0 2013-04-22 Huang Shijie New
[v2,4/8] mtd: replace the hardcode with the onfi_get_feature() 0 0 0 2013-04-22 Huang Shijie New
[v2,3/8] mtd: get the ECC info from the Extended Parameter Page 0 0 0 2013-04-22 Huang Shijie New
[v2,2/8] mtd: add a helper to get the supported features for ONFI nand 0 0 0 2013-04-22 Huang Shijie New
[v2,1/8] mtd: add data structures for Extended Parameter Page 0 0 0 2013-04-22 Huang Shijie New
cfi_cmdset_0002: do_write_buffer timeouts 0 0 0 2013-04-15 Huang Shijie New
[11/11] mtd: gpmi: set the BCH's geometry with the ecc info 0 0 0 2013-03-18 Huang Shijie New
[10/11] mtd: add the ecc info for some full-id nand chips 0 0 0 2013-03-18 Huang Shijie New
[09/11] mtd: parse out the ECC info for the full-id nand chips 0 0 0 2013-03-18 Huang Shijie New
[08/11] mtd: add a new field for ecc info in the nand_flash_dev{} 0 0 0 2013-03-18 Huang Shijie New
[07/11] mtd: replace the hardcode with the onfi_get_feature() 0 0 0 2013-03-18 Huang Shijie New
[06/11] mtd: get the ECC info from the Extended Parameter Page 0 0 0 2013-03-18 Huang Shijie New
[05/11] mtd: add a helper to get the supported features for ONFI nand 0 0 0 2013-03-18 Huang Shijie New
[04/11] mtd: add data structures for Extended Parameter Page 0 0 0 2013-03-18 Huang Shijie New
[03/11] mtd: get the ECC info from the parameter page for ONFI nand 0 0 0 2013-03-18 Huang Shijie New
[01/11] mtd: add datasheet's ECC information to nand_chip{} 0 0 0 2013-03-18 Huang Shijie New
[v6,3/3] mtd: add 4 Toshiba nand chips for the full-id case 0 0 0 2013-03-15 Huang Shijie New
[v5,3/3] mtd: add 4 Toshiba nand chips for the full-id case 0 0 0 2013-03-14 Huang Shijie New