Show patches with: State = Action Required       |   5346 patches
« 1 2 ... 14 15 16 … 53 54 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
[1/1] MTD: Micron SPINAND Driver support - - - - --- 2013-07-12 Kamlakant Patel New
[06/12] drivers/mtd/nand/gpmi-nand: don't use devm_pinctrl_get_select_default() in probe 1 - - - --- 2013-07-10 Wolfram Sang New
[05/12] drivers/mtd/nand: don't use devm_pinctrl_get_select_default() in probe 1 - - - --- 2013-07-10 Wolfram Sang New
SPI: support DUAL and QUAD[patch v1] - - - - --- 2013-07-10 王宇航 New
UBI: torture after scrub - - - - --- 2013-07-09 Sidorov, Andrei New
[v2,10/11] spi: spi-ep93xx: convert to the queued driver infrastructure 1 - - - --- 2013-07-08 Hartley Sweeten New
[RESEND] mtd: refactor call to request_module 1 - 1 - --- 2013-07-08 Kees Cook New
SPI: DUAL/QUAD support - - - - --- 2013-07-05 王宇航 New
Init ONFI get/set features in a more logical place - - - - --- 2013-07-04 Brian Foster New
SPI: DUAL/QUAD support - - - - --- 2013-07-04 王宇航 New
SPI : DUAL/QUAD support - - - - --- 2013-07-04 王宇航 New
[PATCHv2] drivers: mtd: spinand: Add generic spinand frameowrk. - - - - --- 2013-07-03 Poddar, Sourav New
[6/6] mtd: ofpart: add compatible check for child nodes 2 - - - --- 2013-07-03 Josh Wu New
[5/6] mtd: atmel_nand: enable Nand Flash Controller (NFC) write via sram - - - - --- 2013-07-03 Josh Wu New
[4/6] mtd: atmel_nand: enable Nand Flash Controller (NFC) read data via sram - - - - --- 2013-07-03 Josh Wu New
[3/6] mtd: atmel_nand: add Nand Flash Controller (NFC) support - - - - --- 2013-07-03 Josh Wu New
[1/6] MTD: atmel_nand: use devm_xxx gpio kzalloc, gpio and ioremap - - - - --- 2013-07-03 Josh Wu New
[v2,11/11] spi: spi-ep93xx: use master->cur_msg for in-flight message - - - - --- 2013-07-02 Hartley Sweeten New
[v2,10/11] spi: spi-ep93xx: convert to the queued driver infrastructure 1 - - - --- 2013-07-02 Hartley Sweeten New
[v4,3/4] mtd:nand:omap2: updated support for BCH4 ECC scheme - - - - --- 2013-07-02 pekon gupta New
[v4,1/4] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe - - - - --- 2013-07-02 pekon gupta New
[v4,3/4] mtd:nand:omap2: updated support for BCH4 ECC scheme - - - - --- 2013-07-01 pekon gupta New
[v4,1/4] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe - - - - --- 2013-07-01 pekon gupta New
UBI: support ubi_num on mtd.ubi command line - - - - --- 2013-07-01 Artem Bityutskiy New
xattr patches from feb? - - - 1 --- 2013-06-27 Mats Kärrman New
[3/3] drivers: mtd: spinand: Add qspi spansion flash controller - - - - --- 2013-06-26 Poddar, Sourav New
[2/3] drivers: spi: Add qspi flash controller - - - - --- 2013-06-26 Poddar, Sourav New
[1/3] drivers: mtd: spinand: Add generic spinand frameowrk and micron driver. - - - - --- 2013-06-26 Poddar, Sourav New
[V2] mtd: remove unnecessary platform_set_drvdata() 7 - - 1 --- 2013-06-25 Jingoo Han New
[v3,3/4] mtd:nand:omap2: updated support for BCH4 ECC scheme - - - - --- 2013-06-23 pekon gupta New
[v3,1/4] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe - - - - --- 2013-06-23 pekon gupta New
[v3,3/4] mtd:nand:omap2: updated support for BCH4 ECC scheme - - - 1 --- 2013-06-22 pekon gupta New
[v3,1/4] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe - - - - --- 2013-06-22 pekon gupta New
[Q] Using Micron 4-bit on-die ECC with v2.6.36 kernel? - - - - --- 2013-06-19 David Mosberger-Tang New
[6/6] mtd: ofpart: add compatible check for child nodes - - - - --- 2013-06-19 Josh Wu New
[5/6] mtd: atmel_nand: enable Nand Flash Controller (NFC) write via sram - - - - --- 2013-06-19 Josh Wu New
[4/6] mtd: atmel_nand: enable Nand Flash Controller (NFC) read data via sram - - - - --- 2013-06-19 Josh Wu New
[3/6] mtd: atmel_nand: add Nand Flash Controller (NFC) support - - - - --- 2013-06-19 Josh Wu New
[2/6] mtd: atmel_nand: replace pmecc enable code with one function. 1 - - - --- 2013-06-19 Josh Wu New
[1/6] MTD: atmel_nand: use devm_xxx gpio kzalloc, gpio and ioremap - - - - --- 2013-06-19 Josh Wu New
[U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device - - - - --- 2013-06-17 Poddar, Sourav New
[U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device - - - - --- 2013-06-17 Poddar, Sourav New
UBIFS failure & stable page writes - - - - --- 2013-06-15 Mats Kärrman New
[4/4] mtd: gpmi: imx6: fix the wrong method for checking ready/busy - - - - --- 2013-06-14 Huang Shijie New
[3/4] mtd: gpmi: scan two nand chips - - - - --- 2013-06-14 Huang Shijie New
UBIFS failure & stable page writes - - - - --- 2013-06-13 Prins Anton (ST-CO/ENG1.1) New
UBIFS failure & stable page writes - - - - --- 2013-06-12 Prins Anton (ST-CO/ENG1.1) New
UBIFS failure & stable page writes - - - - --- 2013-06-12 Adrian Hunter New
[6/6] mtd: ofpart: add compatible check for child nodes - - - - --- 2013-06-10 Josh Wu New
[5/6] mtd: atmel_nand: enable Nand Flash Controller (NFC) write via sram 1 - - - --- 2013-06-10 Josh Wu New
[4/6] mtd: atmel_nand: enable Nand Flash Controller (NFC) read data via sram 1 - - - --- 2013-06-10 Josh Wu New
[3/6] mtd: atmel_nand: add Nand Flash Controller (NFC) support - - - - --- 2013-06-10 Josh Wu New
[2/6] mtd: atmel_nand: replace pmecc enable code with one function. 1 - - - --- 2013-06-10 Josh Wu New
[1/6] MTD: atmel_nand: use devm_xxx gpio kzalloc, gpio and ioremap - - - - --- 2013-06-10 Josh Wu New
[v2] mtd: orion_nand: Improve error handling in orion_nand_probe - - - - --- 2013-06-10 Emil Goode New
mtd: orion_nand: convert printk to dev_* - - - - --- 2013-06-09 Andy Shevchenko New
mtd: orion_nand: Improve error handling in orion_nand_probe - - - - --- 2013-06-09 Emil Goode New
drivers/mtd/devices/bcm47xxsflash.c: correct argument to kfree - - - - --- 2013-06-08 Julia Lawall New
[3/4] mtd: onenand: samsung: Release memory after incorrect return/goto - - - - --- 2013-06-04 Joe Perches New
[3/3] mtd: cfi_cmdset_0002: increase do_write_buffer() timeout - - - - --- 2013-06-04 Brian Norris New
[2/3] mtd: cfi_cmdset_0002: use msecs_to_jiffies() macro - - - - --- 2013-06-04 Brian Norris New
[1/3] mtd: cfi_cmdset_0002: remove unnecessary initialization - - - - --- 2013-06-04 Brian Norris New
[v2] mtd: Add LED trigger support "mtd-disk" to indicate activity - - - - --- 2013-06-02 Jens Renner New
[02/15] mtd: omap2: allow bulding as a module 1 - - - --- 2013-05-31 Arnd Bergmann New
mtd: lantiq-flash: Convert to devm_kzalloc - - - - --- 2013-05-30 Emil Goode New
[RESEND,2/2] mtd: bcm47: convert to module_platform_driver instead of init/exit - - - - --- 2013-05-30 Libo Chen New
[RESEND,1/2] mtd: bcm47: convert kzalloc to avoid invalid access - - 1 - --- 2013-05-30 Libo Chen New
mtd: fsl_ifc_nand: fix eccstrength for ecc8 1 - - - --- 2013-05-28 Scott Wood New
UBI: Fastmap: Fix memory leak - - - - --- 2013-05-27 Thomas Weber New
mtd: m25p80: add support for the Spansion s25fl008k chip - - 1 - --- 2013-05-27 Kuninori Morimoto New
mtd: Add LED trigger support "mtd-disk" to indicate activity - - - - --- 2013-05-24 Jens Renner New
mtd: Correct 4-byte address mode enable - - - - --- 2013-05-23 Jonas Andersson New
Re: Re: Re: [PATCH] UBI: fix memory leak when use fastmap - - - - --- 2013-05-23 wang.bo116@zte.com.cn New
mtd: nand: use platform_{get,set}_drvdata() 1 - - - --- 2013-05-23 Jingoo Han New
mtd: maps: use platform_{get,set}_drvdata() - - - - --- 2013-05-23 Jingoo Han New
[RESEND] mtd: refactor call to request_module - - - - --- 2013-05-22 Kees Cook New
[RESEND] mtd: fix kfree bcm47xxsflash 1 - - - --- 2013-05-22 Libo Chen New
[v6,05/10,fix] mtd: get the ECC info from the Extended Parameter Page 1 - - - --- 2013-05-20 Huang Shijie New
[3/4,v2] mtd:nand:omap2: updated support for BCH4 ECC scheme - - - - --- 2013-05-17 pekon gupta New
[1/4,v2] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe - - - - --- 2013-05-17 pekon gupta New
[v2,4/4] mtd: atmel_nand: enable Nand Flash Controller (NFC) write via sram - - - - --- 2013-05-17 Josh Wu New
[v2,3/4] mtd: atmel_nand: enable Nand Flash Controller (NFC) read data via sram - - - - --- 2013-05-17 Josh Wu New
[v2,2/4] mtd: atmel_nand: add Nand Flash Controller (NFC) support - - - - --- 2013-05-17 Josh Wu New
[v2,1/4] mtd: atmel_nand: replace pmecc enable code with one function. - - - - --- 2013-05-17 Josh Wu New
[-next] UBI: fix error return code in ubi_init() - - - - --- 2013-05-17 Wei Yongjun New
[v6,09/10] mtd: add the ecc info for some full-id nand chips - - - - --- 2013-05-17 Huang Shijie New
[v6,06/10] mtd: replace the hardcode with the onfi_feature() - - - - --- 2013-05-17 Huang Shijie New
[v6,05/10] mtd: get the ECC info from the Extended Parameter Page 1 - - - --- 2013-05-17 Huang Shijie New
[v6,04/10] mtd: add a helper to get the supported features for ONFI nand - - - - --- 2013-05-17 Huang Shijie New
[v6,03/10] mtd: add data structures for Extended Parameter Page 1 - - - --- 2013-05-17 Huang Shijie New
[1/2] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe - - - - --- 2013-05-16 pekon gupta New
[v5,fix] mtd: gpmi: set the BCH's geometry with the ecc info - - - - --- 2013-05-16 Huang Shijie New
[v5,fix] mtd: get the ECC info from the Extended Parameter Page 1 - - - --- 2013-05-16 Huang Shijie New
[v2,append] mtd: update the ABI document about the ecc step - - - - --- 2013-05-16 Huang Shijie New
UBIFS: add tolerance to use variable writesize - - - - --- 2013-05-15 Dirk Behme New
[v5,11/11] mtd: gpmi: set the BCH's geometry with the ecc info - - - - --- 2013-05-15 Huang Shijie New
[v5,10/11] mtd: add the ecc info for some full-id nand chips - - - - --- 2013-05-15 Huang Shijie New
[v2,4/4] mtd: gpmi: update the ecc step size for mtd_info{} - - - - --- 2013-05-15 Huang Shijie New
[v2,3/4] mtd: set the ecc step size for master/slave mtd_info - - - - --- 2013-05-15 Huang Shijie New
[v2,2/4] mtd: add a new sys node to show the ecc step size - - - - --- 2013-05-15 Huang Shijie New
« 1 2 ... 14 15 16 … 53 54 »