| [V3,1/3] mtd: bcm47xxsflash: keep a reference to the BCMA |
2013-03-06 |
Rafał Miłecki |
|
New |
| [1/4] mtd: prepare place for BCMA NAND flash driver(s) |
2012-09-12 |
Rafał Miłecki |
|
New |
| [RFC] mtd: bcm47xxsflash: add own struct for abstrating bus type |
2012-12-26 |
Rafał Miłecki |
|
New |
| mtd: bcm47xxsflash: adjust names of bus-specific functions |
2012-12-26 |
Rafał Miłecki |
|
New |
| [FIX,3.8] mtd: bcm47xxnflash: increase NFLASH_READY_RETRIES |
2012-12-24 |
Rafał Miłecki |
|
New |
| [3/6] mtd: bcm47xxnflash: init NAND on BCM4706 |
2012-09-27 |
Rafał Miłecki |
|
New |
| [V2,4/6] mtd: bcm47xxnflash: support for NAND_CMD_READID command |
2012-11-12 |
Rafał Miłecki |
|
New |
| [V3,2/3] mtd: bcm47xxsflash: store info about flash type |
2013-03-06 |
Rafał Miłecki |
|
New |
| [2/2] mtd: bcm47xxpart: register extra "firmware" partition |
2013-01-06 |
Rafał Miłecki |
|
New |
| mtd: bcm47xxsflash: add own struct for abstrating bus type |
2013-01-06 |
Rafał Miłecki |
|
New |
| [1/2] mtd: bcm47xxpart: simplify size calculation to one loop |
2013-01-06 |
Rafał Miłecki |
|
New |
| bcm47xxnflash: writing support |
2012-12-03 |
Rafał Miłecki |
|
New |
| [V2,2/3] mtd: bcm47xxsflash: store info about flash type |
2013-03-06 |
Rafał Miłecki |
|
New |
| [RFC] bcm47xxsflash: just use memcpy for reading |
2012-09-19 |
Rafał Miłecki |
|
New |
| [V2,5/6] mtd: bcm47xxnflash: implement reading |
2012-11-12 |
Rafał Miłecki |
|
New |
| [RFC] bcm47xxnflash: use small delay between polling |
2012-11-23 |
Rafał Miłecki |
|
New |
| [V2,3/6] mtd: bcm47xxnflash: init NAND on BCM4706 |
2012-11-12 |
Rafał Miłecki |
|
New |
| mtd: bcm47xxsflash: just use memcpy_fromio for reading |
2012-09-20 |
Rafał Miłecki |
|
New |
| [V2,3/6] mtd: bcm47xxnflash: fix message |
2013-01-28 |
Rafał Miłecki |
|
New |
| [V2,4/6] mtd: bcm47xxnflash: register this as normal driver |
2013-01-28 |
Rafał Miłecki |
|
New |
| [4/6] mtd: bcm47xxnflash: support for NAND_CMD_READID command |
2012-09-27 |
Rafał Miłecki |
|
New |
| [1/6] bcma: export PLL reading function |
2012-09-27 |
Rafał Miłecki |
|
New |
| [FIX,3.9,1/2] Revert "mtd: bcm47xxpart: improve probing of nvram partition" |
2013-03-07 |
Rafał Miłecki |
|
New |
| [V2,6/6] mtd: bcm47xxnflash: enable BCM4706 driver |
2012-11-12 |
Rafał Miłecki |
|
New |
| [SEE,DEPENDENCY] bcm47xxnflash: support NAND_CMD_STATUS |
2012-11-23 |
Rafał Miłecki |
|
New |
| [V3] mtd: bcm47part driver for BCM47XX chipsets |
2012-08-27 |
Rafał Miłecki |
|
New |
| mtd: m25p80: add entry for w25q128 |
2013-02-24 |
Rafał Miłecki |
|
New |
| bcm47xxnflash: define some magic numbers |
2012-11-23 |
Rafał Miłecki |
|
New |
| [2/2] mtd: bcm47xxsflash: implement polling chip status |
2013-03-24 |
Rafał Miłecki |
|
New |
| [V4] mtd: bcm47part driver for BCM47XX chipsets |
2012-08-29 |
Rafał Miłecki |
|
New |
| [WIP,DON'T,APPLY] bcm47xxnflash: writing support |
2012-11-29 |
Rafał Miłecki |
|
New |
| [6/6] bcm47xxnflash: enable BCM4706 driver |
2012-09-27 |
Rafał Miłecki |
|
New |
| [1/2] mtd: bcm47xxsflash: implement ChipCommon R/W ops |
2013-03-24 |
Rafał Miłecki |
|
New |
| [RFC,V3] mtd: bcm47part driver for BCM47XX chipsets |
2012-08-26 |
Rafał Miłecki |
|
New |
| [RFC] mtd: basic (read only) driver for BCMA serial flash |
2012-08-30 |
Rafał Miłecki |
|
New |
| [2/6] mtd: prepare place for BCMA NAND flash driver(s) |
2012-09-27 |
Rafał Miłecki |
|
New |
| [5/6] mtd: bcm47xxnflash: implement reading |
2012-09-27 |
Rafał Miłecki |
|
New |
| [v2] mtd-nand: davinci: Correct 4-bit error correction |
2009-12-10 |
Rajashekhara, Sudhakar |
|
New |
| mtd: nand: davinci: Add cpufreq support |
2011-07-21 |
Rajashekhara, Sudhakar |
|
New |
| mtd-nand: davinci: Correct 4-bit error correction |
2009-11-03 |
Rajashekhara, Sudhakar |
|
New |
| [v2] mtd-nand: davinci: correct 4-bit error correction |
2010-07-15 |
Rajashekhara, Sudhakar |
|
New |
| [v2] m25p80: add support for a callback to platform code on successful device probe |
2010-08-10 |
Rajashekhara, Sudhakar |
|
New |
| m25p80: add support for a callback to platform code on successful device probe |
2010-08-10 |
Rajashekhara, Sudhakar |
|
New |
| [v3] mtd-nand: davinci: correct 4-bit error correction |
2010-07-19 |
Rajashekhara, Sudhakar |
|
New |
| mtd-nand: davinci: correct 4-bit error correction |
2010-07-09 |
Rajashekhara, Sudhakar |
|
New |
| mtdpart: memory accessor interface for MTD layer |
2010-07-09 |
Rajashekhara, Sudhakar |
|
New |
| [MTD] mtdpart: memory accessor interface for MTD layer |
2009-08-18 |
Rajashekhara, Sudhakar |
|
New |
| [MTD] driver/Makefile: Initialize "mtd" and "spi" before "net" |
2009-08-18 |
Rajashekhara, Sudhakar |
|
New |
| [MTD] driver/Makefile: Initialize "mtd" and "spi" before "net" |
2009-08-18 |
Rajashekhara, Sudhakar |
|
New |
| [MTD] m25p80: memory accessor interface for SPI MTD driver |
2009-08-03 |
Rajashekhara, Sudhakar |
|
New |
| eXcite: Remove platform support and drivers. |
2009-12-02 |
Ralf Baechle |
|
New |
| mtd: nand: fix for printing NAND model |
2010-12-30 |
Ralf Rösch |
|
New |
| txx9ndfmc: limit transfer bytes to 512 (ECC provides 6 bytes max) |
2010-12-30 |
Ralf Rösch |
|
New |
| [v2] ubifs: fix kconfig dependency warning |
2011-03-29 |
Randy Dunlap |
|
New |
| mtd/nand_base: fix kernel-doc warnings & typos |
2010-05-25 |
Randy Dunlap |
|
New |
| [-next] mtd: fix physmap.h warnings |
2011-05-23 |
Randy Dunlap |
|
New |
| mtd/lpddr/qinfo_probe.c needs lpddr_cmds to be compiled |
2009-01-10 |
Randy Dunlap |
|
New |
| mtd: fix nand kernel-doc warnings |
2010-11-18 |
Randy Dunlap |
|
New |
| [-next] pcmciamtd: fix printk format warnings |
2010-05-17 |
Randy Dunlap |
|
New |
| mtdswap: fix printk format warning |
2011-03-29 |
Randy Dunlap |
|
New |
| [-next] mtd: fix m25p80 printk formats |
2008-12-15 |
Randy Dunlap |
|
New |
| mtd: fix nand kernel-doc warnings |
2010-11-01 |
Randy Dunlap |
|
New |
| [-next] mtd/nand/r852: fix build for CONFIG_PM=n |
2010-03-01 |
Randy Dunlap |
|
New |
| ubifs: fix kconfig dependency warning |
2011-03-28 |
Randy Dunlap |
|
New |
| [-next] ubi: fix kconfig unmet dependency |
2010-08-12 |
Randy Dunlap |
|
New |
| usibfs: fix kconfig dependency warning |
2010-09-18 |
Randy Dunlap |
|
New |
| build issue #583 for v2.6.29-rc2-13-gf3b8436 : undefined reference to `lpddr_cmdset' |
2009-01-19 |
Randy Dunlap |
|
New |
| [-next] mtd/nand/r852: fix build for CONFIG_PCI disabled |
2010-03-11 |
Randy Dunlap |
|
New |
| [-next] mtd: fix nettel printk formats |
2008-12-15 |
Randy Dunlap |
|
New |
| [-next] mtd: fix nandsim sched.h references |
2008-12-15 |
Randy Dunlap |
|
New |
| [-next] mtd: redwood depends on MTD_PARTITIONS |
2010-07-29 |
Randy Dunlap |
|
New |
| MTD: fix kernel-doc warning in include/linux/mtd/nand.h |
2012-08-19 |
Randy.Dunlap |
|
New |
| [-next] mtd: fix sbc2_flash build when PCI is not enabled |
2012-04-16 |
Randy.Dunlap |
|
New |
| [-next] mtd: fix dataflash printk formats |
2008-12-15 |
Randy.Dunlap |
|
New |
| [-next] mtd: fix nand/docg4.c printk format warnings |
2012-01-31 |
Randy.Dunlap |
|
New |
| mtd: nand: omap2: Fix the nand-disk led trigger |
2012-09-13 |
Raphael Assenat |
|
New |
| drivers/mtd/chips/cfi_probe.c:18 remove unneeded comment |
2010-01-07 |
René Bolldorf |
|
New |
| MTD: NAND Add support for MLC nand with alternate BB marker locations |
2009-02-04 |
Reuben Dowle |
|
New |
| Oops when calling fsync on read-only file-system |
2011-04-12 |
Reuben Dowle |
|
New |
| mtd: Added an ioctl to query the lock status of a flash sector. |
2010-05-31 |
Richard Cochran |
|
New |
| mtd: Added an ioctl to query the lock status of a flash sector. |
2010-06-14 |
Richard Cochran |
|
New |
| ixp4xx: add support for static flash partitions |
2010-06-14 |
Richard Cochran |
|
New |
| ixp4xx: add support for static flash partitions |
2010-05-31 |
Richard Cochran |
|
New |
| [resend] UBI: introduce MTD_PARAM_MAX_COUNT |
2012-08-21 |
Richard Genoud |
|
New |
| Bug on atmel_nand HW ECC : OOB info not correctly written |
2008-10-12 |
Richard Genoud |
|
New |
| [MTD-UTILS,v2,3/4] ubiattach: introduce max_beb_per1024 in UBI_IOCATT |
2012-08-22 |
Richard Genoud |
|
New |
| [v2,3/7] UBI: accept empty string for vid_hdr_offs parameter |
2012-08-20 |
Richard Genoud |
|
New |
| [MTD-UTILS,1/5] sync include/mtd/ubi-user.h with kernel v3.6-rc1 |
2012-08-22 |
Richard Genoud |
|
New |
| [v2,7/7] UBI: drop CONFIG_MTD_UBI_BEB_LIMIT |
2012-08-20 |
Richard Genoud |
|
New |
| [MTD-UTILS] BUG: ubiformat fails on big partitions (>4Gio) |
2012-09-12 |
Richard Genoud |
|
New |
| [MTD-UTILS] io_update test: correct lseek parameters order |
2012-09-12 |
Richard Genoud |
|
New |
| [v2,1/7] UBI: prepare for max_beb_per1024 module parameter addition |
2012-08-20 |
Richard Genoud |
|
New |
| [v3,0/6] UBI: add max_beb_per1024 parameter / ioctl |
2012-09-03 |
Richard Genoud |
|
New |
| NAND BBT: use NAND_BBT_SCAN_MAXBLOCKS |
2012-09-11 |
Richard Genoud |
|
New |
| ubirmvol: correct missing space on usage |
2012-08-31 |
Richard Genoud |
|
New |
| [v3,2/6] UBI: change CONFIG_MTD_UBI_BEB_LIMIT range |
2012-08-20 |
Richard Genoud |
|
New |
| [v2,6/7] UBI: add ioctl for max_beb_per1024 |
2012-08-20 |
Richard Genoud |
|
New |
| [v2,2/7] UBI: change CONFIG_MTD_UBI_BEB_LIMIT range |
2012-08-20 |
Richard Genoud |
|
New |
| [v2,4/7] UBI: check max_beb_per1024 value in ubi_attach_mtd_dev |
2012-08-20 |
Richard Genoud |
|
New |
| [v3,0/6] UBI: add max_beb_per1024 parameter / ioctl |
2012-09-03 |
Richard Genoud |
|
New |
