| [v5,11/11] mtd: gpmi: set the BCH's geometry with the ecc info |
2013-05-15 |
Huang Shijie |
|
New |
| [5/5] mtd: nand: pxa3xx: Add support for Read parameter page command |
2013-05-14 |
Ezequiel Garcia |
|
New |
| [v5,07/11] mtd: replace the hardcode with the onfi_feature() |
2013-05-15 |
Huang Shijie |
|
New |
| [v5,05/11] mtd: add a helper to get the supported features for ONFI nand |
2013-05-15 |
Huang Shijie |
|
New |
| [v5,02/11] mtd: increase max OOB size to 744 |
2013-05-15 |
Huang Shijie |
|
New |
| UBIFS: fix error return code in ubifs_remount_rw() and ubifs_fill_super() |
2013-06-07 |
Wei Yongjun |
|
New |
| UBIFS: add tolerance to use variable writesize |
2013-05-15 |
Dirk Behme |
|
New |
| [1/4,v2] mtd:nand:omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe |
2013-05-17 |
pekon gupta |
|
New |
| [v2,2/4,RESEND] mtd: cfi_cmdset_0002: Invalidate cache after entering/exiting OTP memory |
2013-05-23 |
Christian Riesch |
|
New |
| [3/4,v2] mtd:nand:omap2: updated support for BCH4 ECC scheme |
2013-05-17 |
pekon gupta |
|
New |
| [v5,04/11] mtd: add data structures for Extended Parameter Page |
2013-05-15 |
Huang Shijie |
|
New |
| [v5,01/11] mtd: add datasheet's ECC information to nand_chip{} |
2013-05-15 |
Huang Shijie |
|
New |
| [v5,06/11] mtd: get the ECC info from the Extended Parameter Page |
2013-05-15 |
Huang Shijie |
|
New |
| [v5,08/11] mtd: add ECC info for nand_flash_dev{} |
2013-05-15 |
Huang Shijie |
|
New |
| [v5,10/11] mtd: add the ecc info for some full-id nand chips |
2013-05-15 |
Huang Shijie |
|
New |
| [v5,fix] mtd: get the ECC info from the Extended Parameter Page |
2013-05-16 |
Huang Shijie |
|
New |
| [2/2] ARM: OMAP2+: cleaned-up DT support of various ECC schemes |
2013-05-16 |
pekon gupta |
|
New |
| [RESEND] mtd: nand: nand_bbt: scan for next free bbt block if writing bbt fails |
2013-05-16 |
Jeff Westfahl |
|
New |
| [RESEND,v2] mtd: nand: nand_bbt: scan for next free bbt block if writing bbt fails |
2013-05-16 |
Jeff Westfahl |
|
New |
| [v6,07/10] mtd: add ECC info for nand_flash_dev{} |
2013-05-17 |
Huang Shijie |
|
New |
| [v6,01/10] mtd: add datasheet's ECC information to nand_chip{} |
2013-05-17 |
Huang Shijie |
|
New |
| [v6,03/10] mtd: add data structures for Extended Parameter Page |
2013-05-17 |
Huang Shijie |
|
New |
| [v6,05/10] mtd: get the ECC info from the Extended Parameter Page |
2013-05-17 |
Huang Shijie |
|
New |
| [v6,09/10] mtd: add the ecc info for some full-id nand chips |
2013-05-17 |
Huang Shijie |
|
New |
| [4/4,v2] ARM: OMAP2+: updated ECC scheme attributes for omap2-nand DT |
2013-05-17 |
pekon gupta |
|
New |
| [2/4,v2] ARM: OMAP2+: cleaned-up DT support of various ECC schemes |
2013-05-17 |
pekon gupta |
|
New |
| [v6,05/10,fix] mtd: get the ECC info from the Extended Parameter Page |
2013-05-20 |
Huang Shijie |
|
New |
| mtd: bcm47xxsflash: implement erasing support |
2013-05-21 |
Rafał Miłecki |
|
New |
| [v6,05/10,fix2] mtd: get the ECC info from the Extended Parameter Page |
2013-05-22 |
Huang Shijie |
|
New |
| [RFC] mtd: bcm47xxsflash: writing support |
2013-05-22 |
Rafał Miłecki |
|
New |
| mtd: maps: use platform_{get,set}_drvdata() |
2013-05-23 |
Jingoo Han |
|
New |
| mtd: nand: use platform_{get,set}_drvdata() |
2013-05-23 |
Jingoo Han |
|
New |
| Re: Re: Re: [PATCH] UBI: fix memory leak when use fastmap |
2013-05-23 |
wang.bo116@zte.com.cn |
|
New |
| UBI: Fastmap: Fix memory leak |
2013-05-27 |
Thomas Weber |
|
New |
| [v4,3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm |
2013-05-28 |
pekon gupta |
|
New |
| mtd: fsl_ifc_nand: fix eccstrength for ecc8 |
2013-05-28 |
Scott Wood |
|
New |
| [RESEND,1/2] mtd: bcm47: convert kzalloc to avoid invalid access |
2013-05-30 |
Libo Chen |
|
New |
| mtd: lantiq-flash: Convert to devm_kzalloc |
2013-05-30 |
Emil Goode |
|
New |
| UBIFS failure & stable page writes |
2013-06-12 |
Adrian Hunter |
|
New |
| UBIFS failure & stable page writes |
2013-06-12 |
Prins Anton (ST-CO/ENG1.1) |
|
New |
| mtd: docg4: fix status polling loop |
2013-05-31 |
Mike Dunn |
|
New |
| [3/3] mtd: cfi_cmdset_0002: increase do_write_buffer() timeout |
2013-06-04 |
Brian Norris |
|
New |
| [1/3] mtd: cfi_cmdset_0002: remove unnecessary initialization |
2013-06-04 |
Brian Norris |
|
New |
| [2/3] mtd: cfi_cmdset_0002: use msecs_to_jiffies() macro |
2013-06-04 |
Brian Norris |
|
New |
| mtd: orion_nand: Improve error handling in orion_nand_probe |
2013-06-09 |
Emil Goode |
|
New |
| [v2] mtd: orion_nand: Improve error handling in orion_nand_probe |
2013-06-10 |
Emil Goode |
|
New |
| mtd: orion_nand: convert printk to dev_* |
2013-06-09 |
Andy Shevchenko |
|
New |
| [2/6] mtd: atmel_nand: replace pmecc enable code with one function. |
2013-06-10 |
Wu, Josh |
|
New |
| [v4,1/3] arm: gpmc: Converts GPMC driver to pm_runtime capable |
2013-06-12 |
pekon gupta |
|
New |
| [v4,2/3] arm: gpmc: Low power transition support |
2013-06-12 |
pekon gupta |
|
New |
| [v4,2/3] arm: gpmc: Low power transition support |
2013-06-12 |
pekon gupta |
|
New |
| [v4,3/3] mtd: devices: elm: Low power transition support |
2013-06-12 |
pekon gupta |
|
New |
| [v4,1/3] arm: gpmc: Converts GPMC driver to pm_runtime capable |
2013-06-12 |
pekon gupta |
|
New |
| [v4,3/3] mtd: devices: elm: Low power transition support |
2013-06-12 |
pekon gupta |
|
New |
| [1/4] mtd: gpmi: decouple the chip select from the DMA channel |
2013-06-14 |
Huang Shijie |
|
New |
| [4/4] mtd: gpmi: imx6: fix the wrong method for checking ready/busy |
2013-06-14 |
Huang Shijie |
|
New |
| [U-Boot] U-boot: Erase/read/write issue with S25fl256S flash device |
2013-06-17 |
Poddar, Sourav |
|
New |
| [v5,2/3] arm: gpmc: Low power transition support |
2013-06-17 |
pekon gupta |
|
New |
| [v5,1/3] ARM: OMAP2+: gpmc: Converts GPMC driver to pm_runtime capable |
2013-06-17 |
pekon gupta |
|
New |
| MTD: OneNAND: multiblock erase support |
2009-06-23 |
Mika Korhonen |
|
New |
| [-next] mtd: fix nandsim sched.h references |
2008-12-15 |
Randy Dunlap |
|
New |
| Orion NAND: Make dword load asm volatile to avoid GCC optimizing it away |
2009-08-20 |
Simon Kagstrom |
|
New |
| [2.6.30-rc6,1/3] NAND: Add "page" parameter to all read_page/read_page_raw APIs |
2009-05-18 |
nsnehaprabha@ti.com |
|
New |
| [resend] mtd: OOPS accessing flash operations over STM flash on PXA |
2008-12-01 |
Denis V. Lunev |
|
New |
| UBIFS Corrupt during power failure |
2009-05-18 |
Eric Holmberg |
|
New |
| UBI: remove built-in gluebi |
2009-05-18 |
Artem Bityutskiy |
|
New |
| UBI: add notification API |
2009-05-18 |
Artem Bityutskiy |
|
New |
| [V7,4/4] MTD: pxa3xx_nand: enable multiple chip select support |
2011-07-12 |
Lei Wen |
|
New |
| Fix incorrect use of loose in fs.c |
2008-12-05 |
Nick Andrew |
|
New |
| [V7,3/4] MTD: pxa3xx_nand: sperate each chip individual info |
2011-07-12 |
Lei Wen |
|
New |
| mtd_dataflash: unbreak erase support |
2009-05-18 |
David Woodhouse |
|
New |
| mtd_dataflash: unbreak erase support |
2009-05-18 |
Peter Korsgaard |
|
New |
| plat_nand: add missing __devexit_p() |
2009-05-18 |
Mike Frysinger |
|
New |
| [v6,3/3] MTD: OneNAND: fix double printing of function name |
2009-10-23 |
Mika Korhonen |
|
New |
| RFC: [PATCH] MTD OneNAND: multiblock erase support |
2009-06-15 |
Mika Korhonen |
|
New |
| MTD: tests: add mtd_subpagetest |
2008-12-08 |
Artem Bityutskiy |
|
New |
| [2/3,-v3] MTD: Add MTD NAND tests support |
2009-10-21 |
Akinobu Mita |
|
New |
| [1/3,-v3] MTD: Add __nand_calculate_ecc() to NAND ECC functions |
2009-10-21 |
Akinobu Mita |
|
New |
| MTD: tests: add mtd_oobtest |
2008-12-08 |
Artem Bityutskiy |
|
New |
| [3/3,-v3] MTD: Add nand_ecc test module |
2009-10-21 |
Akinobu Mita |
|
New |
| mtd: let include/linux/mtd/partitions.h stand on its own |
2009-06-15 |
Nicolas Pitre |
|
New |
| MTD: tests: add mtd_speedtest |
2008-12-08 |
Artem Bityutskiy |
|
New |
| MTD: tests: add mtd_stresstest |
2008-12-08 |
Artem Bityutskiy |
|
New |
| [v2,5/5] powerpc/85xx: TQM8548: Update DTS file for multi-chip support |
2009-03-19 |
Wolfgang Grandegger |
|
New |
| [1/1] jffs2: leaking jffs2_summary in function jffs2_scan_medium |
2009-06-13 |
Christian Engelmayer |
|
New |
| mtd/physmap: make physmap compat explicit |
2008-11-14 |
Mike Frysinger |
|
New |
| mtd: Make the third arg of mtd_concat_create() const |
2008-12-01 |
Catalin Marinas |
|
New |
| [2/9] mtd: Blackfin NFC Driver: mark bf5xx_nand_add_partition() as __devinit |
2009-02-11 |
Andrew Morton |
|
New |
| [3/9] mtd: Blackfin NFC Driver: drop pointless casts with set_dma_callback() |
2009-02-11 |
Andrew Morton |
|
New |
| [v2] mtd/bfin-async-flash: use parse_mtd() |
2008-11-14 |
Mike Frysinger |
|
New |
| [v2] mtd/physmap: use parse_mtd() |
2008-11-14 |
Mike Frysinger |
|
New |
| [v2] mtd: unify mtd partition/device registration |
2008-11-14 |
Mike Frysinger |
|
New |
| [MTD,CHIPS] stm_flash: new ST PSD4256G compatible flash chip driver |
2009-06-13 |
Mike Frysinger |
|
New |
| [4/9] jffs2: force the jffs2 GC daemon to behave a bit better |
2009-02-11 |
Andrew Morton |
|
New |
| [9/9] fs/jffs2/malloc.c: kmem_cache_alloc/memset -> kmem_cache_zalloc |
2009-02-11 |
Andrew Morton |
|
New |
| mtd: fix order of TEST/PARTITIONS kconfig options |
2009-06-13 |
Mike Frysinger |
|
New |
| [1/9] mtd: Blackfin NFC Driver: do not clobber DMAC1_PERIMUX |
2009-02-11 |
Andrew Morton |
|
New |
| [11/15] MTD: nand: add ->badblockbits to specify the minimum number of bits in bad block byte to consider the block good |
2010-02-22 |
Maxim Levitsky |
|
New |
| [09/15] MTD: nand: cleanup the nand_do_write_ops |
2010-02-22 |
Maxim Levitsky |
|
New |
| [MTD] bcmring: mtd nand driver |
2009-09-30 |
Leo (Hao) Chen |
|
New |
