Patchwork Linux MTD development

login
register
mail settings

Incoming patches

« Previous 1 2 ... 8 9 10 11 12 13 14 15 16 17 Next »
Filters: State = Action Required remove filter    |    Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[v5,fix] mtd: get the ECC info from the Extended Parameter Page 1 0 0 2013-05-16 Huang Shijie New
[v5,fix] mtd: gpmi: set the BCH's geometry with the ecc info 0 0 0 2013-05-16 Huang Shijie New
[v6,03/10] mtd: add data structures for Extended Parameter Page 1 0 0 2013-05-17 Huang Shijie New
[v6,04/10] mtd: add a helper to get the supported features for ONFI nand 0 0 0 2013-05-17 Huang Shijie New
[v6,05/10] mtd: get the ECC info from the Extended Parameter Page 1 0 0 2013-05-17 Huang Shijie New
[v6,06/10] mtd: replace the hardcode with the onfi_feature() 0 0 0 2013-05-17 Huang Shijie New
[v6,09/10] mtd: add the ecc info for some full-id nand chips 0 0 0 2013-05-17 Huang Shijie New
[v6,05/10,fix] mtd: get the ECC info from the Extended Parameter Page 1 0 0 2013-05-20 Huang Shijie New
[3/4] mtd: gpmi: scan two nand chips 0 0 0 2013-06-14 Huang Shijie New
[4/4] mtd: gpmi: imx6: fix the wrong method for checking ready/busy 0 0 0 2013-06-14 Huang Shijie New
[v3,1/6] mtd: add a new field to mtd_info{} 0 0 0 2013-08-12 Huang Shijie New
[v3,2/6] mtd: add a new sys node to show the ecc step size 0 0 0 2013-08-12 Huang Shijie New
[v3,3/6] mtd: set the ecc step size for master/slave mtd_info 0 0 0 2013-08-12 Huang Shijie New
[v3,6/6] mtd: update the ABI document about the ecc step 0 0 0 2013-08-12 Huang Shijie New
[01/10] mtd: set the cell information for ONFI nand 0 0 0 2013-08-12 Huang Shijie New
[03/10] mtd: print out the cell information for nand chip 0 0 0 2013-08-12 Huang Shijie New
[04/10] mtd: gpmi: rewrite the gpmi_ecc_write_oob() to support the jffs2 0 0 0 2013-08-12 Huang Shijie New
[05/10] mtd: add more comment for MTD_NANDFLASH/MTD_MLCNANDFLASH 0 0 0 2013-08-12 Huang Shijie New
[07/10] jffs2: init the ret with -EINVAL 0 0 0 2013-08-12 Huang Shijie New
[08/10] mtd: add MTD_MLCNANDFLASH case for mtd_type_show() 0 0 0 2013-08-12 Huang Shijie New
[09/10] mtd: add more information for the MTD_NANDFLASH case 0 0 0 2013-08-12 Huang Shijie New
[mtd-www:] nand-data: add four Toshiba nand chips 1 0 0 2013-08-13 Huang Shijie New
[v4,4/6] mtd: set ONFI nand's default hooks in nand_set_defaults() 0 0 0 2013-08-16 Huang Shijie New
[v4,5/6] mtd: gpmi: remove the nand_scan() 0 0 0 2013-08-16 Huang Shijie New
[v4,6/6] mtd: update the ABI document about the ecc step size 0 0 0 2013-08-16 Huang Shijie New
[v2,1/9] mtd: nand: rename the cellinfo to bits_per_cell 0 0 0 2013-08-19 Huang Shijie New
[v2,3/9] mtd: print out the cell information for nand chip 0 0 0 2013-08-19 Huang Shijie New
[v2,4/9] mtd: gpmi: rewrite the gpmi_ecc_write_oob() to support the jffs2 0 0 0 2013-08-19 Huang Shijie New
[v2,5/9] mtd: add more comment for MTD_NANDFLASH/MTD_MLCNANDFLASH 0 0 0 2013-08-19 Huang Shijie New
[v2,6/9] mtd: fix the wrong mtd->type for nand chip 0 0 0 2013-08-19 Huang Shijie New
[v2,7/9] jffs2: init the ret with -EINVAL 0 0 0 2013-08-19 Huang Shijie New
[v2,9/9] mtd: add a helper to detect the nand type 0 0 0 2013-08-19 Huang Shijie New
[V1,1/5] mtd: m25p80: move the spi-nor commands to a header 0 0 0 2013-08-19 Huang Shijie New
[V1,2/5] mtd: m25p80: add support for Spansion s25fl128s chip 0 0 0 2013-08-19 Huang Shijie New
[V1,3/5] mtd: m25p80: add the quad-read support 0 0 0 2013-08-19 Huang Shijie New
[V1,4/5] spi: Add Freescale QuadSpi driver 0 0 0 2013-08-19 Huang Shijie New
[v2,append] mtd: mtd-abi: add a helper to detect the nand type 0 0 0 2013-08-19 Huang Shijie New
[append,fix] mtd: mtd-abi: add a helper to detect the nand type 0 0 0 2013-08-20 Huang Shijie New
[v2,1/8] mtd: m25p80: move the spi-nor commands to a header 0 0 0 2013-08-26 Huang Shijie New
[v2,2/8] mtd: m25p80: add support for Spansion s25fl128s chip 0 0 0 2013-08-26 Huang Shijie New
[v2,3/8] mtd: m25p80: add the quad-read support 0 0 0 2013-08-26 Huang Shijie New
[v2,4/8] mtd: m25p80: add the DDR quad-read support 0 0 0 2013-08-26 Huang Shijie New
[v2,5/8] spi: Add Freescale QuadSpi driver 0 0 0 2013-08-26 Huang Shijie New
[v2,6/8] Documentation: add the binding file for Quadspi driver 0 0 0 2013-08-26 Huang Shijie New
[v3,01/10] mtd: nand: rename the cellinfo to bits_per_cell 0 0 0 2013-08-26 Huang Shijie New
[v3,02/10] mtd: set the cell information for ONFI nand 0 0 0 2013-08-26 Huang Shijie New
[v3,03/10] mtd: print out the cell information for nand chip 0 0 0 2013-08-26 Huang Shijie New
[v3,04/10] mtd: gpmi: rewrite the gpmi_ecc_write_oob() to support the jffs2 0 0 0 2013-08-26 Huang Shijie New
[v3,05/10] mtd: add more comment for MTD_NANDFLASH/MTD_MLCNANDFLASH 0 0 0 2013-08-26 Huang Shijie New
[v3,06/10] mtd: fix the wrong mtd->type for nand chip 0 0 0 2013-08-26 Huang Shijie New
[v3,07/10] jffs2: do not support the MLC nand 0 0 0 2013-08-26 Huang Shijie New
[v3,08/10] mtd: add MTD_MLCNANDFLASH case for mtd_type_show() 0 0 0 2013-08-26 Huang Shijie New
[v3,09/10] mtd: add a helper to detect the nand type 0 0 0 2013-08-26 Huang Shijie New
[v3,10/10] mtd: mtd-abi: add a helper to detect the nand type 0 0 0 2013-08-26 Huang Shijie New
[V2,1/4] mtd: gpmi: decouple the chip select from the DMA channel 0 0 0 2013-08-27 Huang Shijie New
[V2,2/4] mtd: gpmi: use DMA channel 0 for all the nand chips 0 0 0 2013-08-27 Huang Shijie New
[V2,4/4] mtd: gpmi: imx6: fix the wrong method for checking ready/busy 0 0 0 2013-08-27 Huang Shijie New
[v3,1/8] mtd: m25p80: move the spi-nor commands to a header 0 0 0 2013-08-30 Huang Shijie New
[v3,2/8] mtd: m25p80: add support for Spansion s25fl128s chip 0 0 0 2013-08-30 Huang Shijie New
[v3,3/8] mtd: m25p80: add the quad-read support 0 0 0 2013-08-30 Huang Shijie New
[v3,4/8] mtd: m25p80: add the DDR quad-read support 0 0 0 2013-08-30 Huang Shijie New
[v3,5/8] spi: Add Freescale QuadSpi driver 0 0 0 2013-08-30 Huang Shijie New
[v3,6/8] Documentation: add the binding file for Quadspi driver 0 0 0 2013-08-30 Huang Shijie New
gpmi-nand driver and jffs2 support 0 0 0 2013-08-31 Huang Shijie New
ubi: attach: do not return -EINVAL if the mtd->numeraseregions is 1 0 0 0 2013-09-18 Huang Shijie New
[v4,01/12] mtd: nand: add a helper to check the SLC/MLC nand chip 0 0 0 2013-09-25 Huang Shijie New
[v4,02/12] mtd: nand: rename the cellinfo to bits_per_cell 0 0 0 2013-09-25 Huang Shijie New
[v4,04/12] mtd: nand: set the cell information for ONFI nand 0 0 0 2013-09-25 Huang Shijie New
[v4,05/12] mtd: nand: print out the cell information for nand chip 0 0 0 2013-09-25 Huang Shijie New
[v4,06/12] mtd: gpmi: rewrite the gpmi_ecc_write_oob() to support the jffs2 0 0 0 2013-09-25 Huang Shijie New
[v4,07/12] mtd: nand: add more comment for MTD_NANDFLASH/MTD_MLCNANDFLASH 0 0 0 2013-09-25 Huang Shijie New
[v4,08/12] mtd: nand: add a helper to detect the nand type 0 0 0 2013-09-25 Huang Shijie New
[v4,09/12] mtd: mtd-abi: add a helper to detect the nand type 0 0 0 2013-09-25 Huang Shijie New
[v4,10/12] mtd: add MTD_MLCNANDFLASH case for mtd_type_show() 0 0 0 2013-09-25 Huang Shijie New
[v4,11/12] jffs2: do not support the MLC nand 0 0 0 2013-09-25 Huang Shijie New
[v4,12/12] mtd: nand: fix the wrong mtd->type for nand chip 0 0 0 2013-09-25 Huang Shijie New
gpmi-mtd ecc regression 0 0 0 2013-10-21 Huang Shijie New
mtd: gpmi: fix the ecc regression 0 0 0 2013-10-22 Huang Shijie New
[for,mtd-utils] flash_erase: check the nand type 0 0 0 2013-10-24 Huang Shijie New
[V2] mtd: gpmi: fix the ecc regression 0 0 0 2013-10-24 Huang Shijie New
[v2,fix] mtd: gpmi: fix the ecc regression 0 0 0 2013-10-24 Huang Shijie New
mtd: gpmi: add a new DT property to use the datasheet's minimum required ECC 0 0 0 2013-10-25 Huang Shijie New
[v2] mtd: gpmi: add a new DT property to use the datasheet's minimum required ECC 0 0 0 2013-10-28 Huang Shijie New
[bugfix] mtd: gpmi: serialize all the dma operations 0 0 0 2013-11-06 Huang Shijie New
mtd: gpmi: wake up the process at the end of the DMA callback 0 0 0 2013-11-11 Huang Shijie New
[fix] mtd: gpmi: wake up the process at the end of the DMA callback 0 0 0 2013-11-11 Huang Shijie New
[7/8] mtd: gpmi: change pr_err to dev_err 0 0 0 2013-11-14 Huang Shijie New
[v2,2/3] mtd: gpmi: change pr_err to dev_err 0 0 0 2013-11-19 Huang Shijie New
[v2,3/3] mtd: gpmi: change pr_debug to dev_dbg 0 0 0 2013-11-19 Huang Shijie New
[v3,2/2] mtd: gpmi: change pr_debug to dev_dbg 0 0 0 2013-11-20 Huang Shijie New
mtd: m25p80: add support for Spansion s25fl128s chip 1 0 0 2013-11-20 Huang Shijie New
[1/4] mtd: spi-nor: move the SPI NOR commands to a new header file 0 0 0 2013-11-26 Huang Shijie New
[2/4] mtd: spi-nor: add a new data structrue spi_nor{} 0 0 0 2013-11-26 Huang Shijie New
[3/4] mtd: spi-nor: add the framework for SPI NOR 0 0 0 2013-11-26 Huang Shijie New
[4/4] mtd: m25p80: use the new spi-nor APIs 0 0 0 2013-11-26 Huang Shijie New
mtd: nand: parse the Hynix nand which uses <26nm technology 0 0 0 2013-12-02 Huang Shijie New
mtd: nand: parse out the datasheet's required minimum ECC for Hynix(>=26nm) 0 0 0 2013-12-02 Huang Shijie New
[3/4] mtd: nand: kill the the NAND_MAX_PAGESIZE/NAND_MAX_OOBSIZE for nand_buffers{} 0 0 0 2013-12-20 Huang Shijie New
[V2,1/2] mtd: nand: add a helper to parse the Hynix nand 0 0 0 2013-12-25 Huang Shijie New
[V2,2/2] mtd: nand: parse the Hynix nand which uses <26nm technology 0 0 0 2013-12-25 Huang Shijie New