Patchwork Linux MTD development

login
register
mail settings

Incoming patches

« Previous 1 2 ... 10 11 12 13 14 15 16 17 18 ... 59 60 Next »
Filters: State = Action Required remove filter    |    Archived = No remove filter
Patch A/R/T Date Submitter Delegate State
[v3,8/8] ARM: dts: vf610-twr: Add SPI NOR support 0 0 0 2013-08-30 Huang Shijie New
[v3,7/9] mtd: nand: omap2: use gpmc provided irqs 0 0 0 2012-04-05 Mohammed Afzal New
[v3,7/9] mtd: nand: davinci: adjust DT properties to MTD generic 0 2 0 2013-12-05 Khoronzhuk, Ivan New
[v3,7/8] mtd: cfi_cmdset_0002: add CFI detection for SST 39VF{32, 64}xxB chips 0 0 0 2010-04-22 Guillaume LECERF New
[v3,7/8] ARM: dts: vf610: change the PAD values for Quadspi 0 0 0 2013-08-30 Huang Shijie New
[v3,7/7] mtd: spi-nor: Add Freescale QuadSpi driver 0 0 0 2013-12-16 Huang Shijie New
[v3,7/7] DTS: add fsl,spi-quirk-trans-len-limit property 0 0 0 2010-09-30 Mingkai Hu New
[v3,7/7] ARM: mach-shmobile: mackerel: Add the flash controller flctl 0 0 0 2012-03-01 Bastian Hecht New
[v3,7/7] ARM: davinci: add support for the am1808 based enbw_cmc board 0 0 0 2012-03-05 Heiko Schocher New
[v3,6/9] mtd: nand: omap2: obtain memory from resource 0 0 0 2012-04-05 Mohammed Afzal New
[v3,6/9] mtd: nand: davinci: extend description of bindings 0 2 0 2013-12-05 Khoronzhuk, Ivan New
[v3,6/8] Documentation: add the binding file for Quadspi driver 0 0 0 2013-08-30 Huang Shijie New
[v3,6/7] nanddump: add --oob option 0 0 0 2011-06-22 Brian Norris New
[v3,6/7] mtd: m25p80: add a read function to read page by page 0 0 0 2010-09-30 Mingkai Hu New
[v3,6/7] Documentation: add the binding file for Quadspi driver 0 0 0 2013-12-16 Huang Shijie New
[v3,6/7] ARM: mtd: nand: davinci: add OF support for davinci nand controller 0 0 0 2012-03-05 Heiko Schocher New
[v3,6/6] mtd: update the ABI document about the ecc step 0 0 0 2013-08-12 Huang Shijie New
[v3,6/6] UBI: drop CONFIG_MTD_UBI_BEB_LIMIT 0 0 0 2012-08-20 Richard Genoud New
[v3,5/9] mtd: nand: davinci: move bindings under mtd 1 2 0 2013-12-05 Khoronzhuk, Ivan New
[v3,5/9] ARM: OMAP2+: gpmc-smsc911x: gpmc driver information 0 0 0 2012-04-05 Mohammed Afzal New
[v3,5/8] spi: Add Freescale QuadSpi driver 0 0 0 2013-08-30 Huang Shijie New
[v3,5/8] mtd: cfi_cmdset_0002: do not fail on no extended query table as they are both optional 0 0 0 2010-04-22 Guillaume LECERF New
[v3,5/7] mtd: spi-nor: add a helper to find the spi_device_id 0 0 0 2013-12-16 Huang Shijie New
[v3,5/7] mtd: m25p80: add support to parse the SPI flash's partitions 1 0 0 2010-09-30 Mingkai Hu New
[v3,5/7] UBIFS: introduce write-buffer size field 0 0 0 2011-03-08 Artem Bityutskiy New
[v3,5/6] UBI: add ioctl for max_beb_per1024 0 0 0 2012-08-20 Richard Genoud New
[v3,5/5] mtdinfo: consolidate help as display_help() 1 0 0 2011-08-11 Brian Norris New
[v3,5/5] mtd: nand: use __packed shorthand 1 0 0 2014-01-04 Brian Norris New
[v3,5/5] mtd: nand: print out the right information for JEDEC compliant nand 1 0 0 2014-02-21 Huang Shijie New
[v3,4/9] mtd: nand: davinci: simplify error handling 1 2 0 2013-12-05 Khoronzhuk, Ivan New
[v3,4/9] ARM: OMAP2+: gpmc-nand: populate gpmc configs 0 0 0 2012-04-05 Mohammed Afzal New
[v3,4/8] mtd: m25p80: add the DDR quad-read support 0 0 0 2013-08-30 Huang Shijie New
[v3,4/8] mtd: cfi_probe: use P_ID_* definitions instead of hardcoded values 0 0 0 2010-04-22 Guillaume LECERF New
[v3,4/7] powerpc/of: add eSPI controller dts bindings and DTS modification 0 0 0 2010-09-30 Mingkai Hu New
[v3,4/7] mtd: m25p80: use the SPI nor framework 0 0 0 2013-12-16 Huang Shijie New
[v3,4/6] UBI: replace MTD_UBI_BEB_LIMIT with module parameter 0 0 0 2012-08-20 Richard Genoud New
[v3,4/5] mtd: nand: support Micron READ RETRY 0 0 0 2014-01-04 Brian Norris New
[v3,4/4] powerpc/85xx: TQM8548: Update DTS file for multi-chip support 0 0 0 2009-03-25 Wolfgang Grandegger New
[v3,4/4] omap: nand: making ecc layout as compatible with romcode ecc 0 0 0 2010-07-13 Sukumar Ghorai New
[v3,4/4] mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ? 0 0 0 2014-03-24 pekon gupta New
[v3,4/4] mtd: nand: omap: Documentation: How to select correct ECC scheme for your device ? 0 0 0 2014-05-09 pekon gupta New
[v3,4/4] mtd: nand: gpio: Add support for multichip devices 1 0 0 2013-08-06 Alexander Shiyan New
[v3,4/4] mtd: devices: elm: add checks ELM H/W constrains, driver code cleanup 0 0 0 2013-11-02 pekon gupta New
[v3,4/4] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt 0 0 0 2013-06-22 pekon gupta New
[v3,4/4] ARM: dts: AM33xx: updated default ECC scheme in nand-ecc-opt 0 0 0 2013-06-23 pekon gupta New
[v3,3/9] mtd: nand: davinci: check required ti, davinci-chipselect property 0 2 0 2013-12-05 Khoronzhuk, Ivan New
[v3,3/9] ARM: OMAP2+: nand: create platform data structure 0 0 0 2012-04-05 Mohammed Afzal New
[v3,3/8] mtd: m25p80: add the quad-read support 0 0 0 2013-08-30 Huang Shijie New
[v3,3/7] mtd: spi-nor: add the framework for SPI NOR 0 0 0 2013-12-16 Huang Shijie New
[v3,3/7] eSPI: add eSPI controller support 0 0 0 2010-09-30 Mingkai Hu New
[v3,3/7] UBIFS: incorporate maximum write size 0 0 0 2011-03-08 Artem Bityutskiy New
[v3,3/6] mtd: set the ecc step size for master/slave mtd_info 0 0 0 2013-08-12 Huang Shijie New
[v3,3/6] mtd: nand: erase block before marking bad 0 0 0 2012-01-09 Brian Norris New
[v3,3/6] UBI: check max_beb_per1024 value in ubi_attach_mtd_dev 0 0 0 2012-08-20 Richard Genoud New
[v3,3/5] mtd: nand: add generic READ RETRY support 0 0 0 2014-01-04 Brian Norris New
[v3,3/5] mtd: nand: add a helper to get the supported features for JEDEC 1 0 0 2014-02-21 Huang Shijie New
[v3,3/4] powerpc: NAND: FSL UPM: document new bindings 1 0 0 2009-03-25 Wolfgang Grandegger New
[v3,3/4] omap: nand: ecc layout select from board file 0 0 0 2010-07-13 Sukumar Ghorai New
[v3,3/4] mtd:nand:omap2: updated support for BCH4 ECC scheme 0 0 1 2013-06-22 pekon gupta New
[v3,3/4] mtd:nand:omap2: updated support for BCH4 ECC scheme 0 0 0 2013-06-23 pekon gupta New
[v3,3/4] mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes 0 0 0 2013-11-02 pekon gupta New
[v3,3/4] mtd: nand: omap: add support for BCH16_ECC - NAND driver updates 0 0 0 2014-05-09 pekon gupta New
[v3,3/4] mtd: nand: gpio: Return real nand_scan() error code on fail 0 0 0 2013-08-06 Alexander Shiyan New
[v3,3/3] ubifs: fix-up free space on mount if flag is set 0 0 0 2011-05-05 Matthew L. Creech New
[v3,3/3] omap3 nand: fix issue in board file to detect nand 0 0 0 2010-05-18 Sukumar Ghorai New
[v3,3/3] mtd: nand: omap2: Support for hardware BCH error correction. 0 0 0 2012-11-29 Philip, Avinash New
[v3,3/3] mtd: nand: gpmi: add raw oob access functions 0 0 0 2014-09-23 Boris BREZILLON New
[v3,3/3] mtd: nand: add support for H27UCG8T2B(16K + 1280) 0 0 0 2014-01-03 Huang Shijie New
[v3,3/3] mtd: gpmi: change the code for clocks 0 0 0 2012-07-02 Huang Shijie New
[v3,3/3] mtd: devices: elm: Low power transition support 0 0 0 2013-02-19 Philip, Avinash New
[v3,3/3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip 0 0 0 2011-11-15 b35362@freescale.com New
[v3,3/3] mtd-nand: DaVinci: Add 4-bit ECC support for large page NAND chips 0 1 0 2009-07-16 nsnehaprabha@ti.com New
[v3,3/3] mtd-nand: DaVinci: Add 4-bit ECC support for large page NAND chips 0 0 0 2009-07-17 David Brownell New
[v3,3/3] arm:davinci: move NAND and NOR devices as aemif MFD slaves 0 0 0 2012-02-07 Manjunathappa, Prakash New
[v3,3/3] Place the cleanmarker in OOB area according to the mode MTD_OOB_AUTO 0 0 0 2010-06-18 Stanley.Miao New
[v3,3/3] ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm 0 0 0 2013-05-02 pekon gupta New
[v3,3/3] : mtdoops: store all kernel messages in a circular buffer 0 0 0 2009-10-08 Simon Kagstrom New
[v3,26/27,ARM,NAND,bcmring] add bcmring umi nand driver support 0 0 0 2009-07-17 Leo (Hao) Chen New
[v3,26/27,ARM,NAND,bcmring] add bcmring umi nand driver support 0 0 0 2009-07-28 Leo (Hao) Chen New
[v3,2/9] mtd: nand: davinci: return ENOMEM if memory allocation is failed 0 2 0 2013-12-05 Khoronzhuk, Ivan New
[v3,2/9] ARM: OMAP2+: gpmc: registers for nand driver 0 0 0 2012-04-05 Mohammed Afzal New
[v3,2/8] mtd: m25p80: add support for Spansion s25fl128s chip 0 0 0 2013-08-30 Huang Shijie New
[v3,2/8] mtd: cfi_probe: make the addresses used to enter Auto Select Mode variable 0 0 0 2010-04-22 Guillaume LECERF New
[v3,2/7] spi/mpc8xxx: refactor the common code for SPI/eSPI controller 0 0 0 2010-09-30 Mingkai Hu New
[v3,2/7] nanddump: remove --skipbad, leaving --bb=skipbad 0 0 0 2011-06-22 Brian Norris New
[v3,2/7] mtd: spi-nor: add the basic data structures 0 0 0 2013-12-16 Huang Shijie New
[v3,2/6] mtd: nand: write bad block marker by default even with BBT 0 0 0 2012-01-09 Brian Norris New
[v3,2/6] mtd: add a new sys node to show the ecc step size 0 0 0 2013-08-12 Huang Shijie New
[v3,2/6] UBI: change CONFIG_MTD_UBI_BEB_LIMIT range 0 0 0 2012-08-20 Richard Genoud New
[v3,2/5] mtd: nand: add ONFI vendor block for Micron 1 0 0 2014-01-04 Brian Norris New
[v3,2/4] omap3: nand: configurable fifo threshold to gain the throughput 0 0 0 2010-07-13 Sukumar Ghorai New
[v3,2/4] mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemes 0 0 0 2013-11-02 pekon gupta New
[v3,2/4] mtd: nand: omap: add support for BCH16_ECC - ELM driver updates 0 0 0 2014-03-24 pekon gupta New
[v3,2/4] mtd: nand: omap: add support for BCH16_ECC - ELM driver updates 0 0 0 2014-05-09 pekon gupta New
[v3,2/4] mtd: nand: gpio: Use devm_gpio_request_one() where possible 0 0 0 2013-08-06 Alexander Shiyan New
[v3,2/4] NAND: FSL-UPM: Add wait flags to support board/chip specific delays 1 0 0 2009-03-25 Wolfgang Grandegger New
[v3,2/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes 0 0 0 2013-06-22 pekon gupta New
[v3,2/4] ARM: OMAP2+: cleaned-up DT support of various ECC schemes 0 0 0 2013-06-23 pekon gupta New
[v3,2/3] ubifs: add ubifs_fixup_free_space() 0 0 0 2011-05-05 Matthew L. Creech New
[v3,2/3] omap3 nand: cleanup virtual address usages 0 0 0 2010-05-18 Sukumar Ghorai New