| [1/7] UBI: Fastmap: Fix lock imbalance in case of an error |
2012-07-09 |
Richard Weinberger |
|
New |
| [RFC] mtd: const char * const stuff |
2013-03-11 |
Artem Bityutskiy |
|
New |
| [RFC/PATCH,1/1] ubi: Add ubiblock driver |
2012-11-20 |
Ezequiel Garcia |
|
New |
| on-die ECC support |
2013-03-20 |
David Mosberger-Tang |
|
New |
| [1/2] mtd: maps: physmap: Add GPIO VPP control |
2012-07-12 |
Pawel Moll |
|
New |
| mtd: mtd_nandecctest: add more tests |
2012-07-09 |
Akinobu Mita |
|
New |
| nand: gpmi-nand: Fix clock registration |
2012-09-23 |
Fabio Estevam |
|
New |
| bcm47xxnflash: writing support |
2012-12-03 |
Rafał Miłecki |
|
New |
| mtd: cmdlineparts.c: Codingstyle cleanup |
2012-09-19 |
Stefan Roese |
|
New |
| [6/7] UBI: Fastmap: Make sure that find_wl_entry() never returns NULL |
2012-07-09 |
Richard Weinberger |
|
New |
| [3/4] UBI: use the whole MTD device size to get bad_peb_limit |
2012-07-10 |
Richard Genoud |
|
New |
| [4/4] UBI: replace MTD_UBI_BEB_LIMIT with user-space parameter |
2012-07-10 |
Richard Genoud |
|
New |
| [1/4] mtd_is_partition: struct mtd_info should be const |
2012-07-10 |
Richard Genoud |
|
New |
| [2/4] MTD parts: introduce mtd_get_device_size() |
2012-07-10 |
Richard Genoud |
|
New |
| ubiattach: introduce max_beb_per1024 in UBI_IOCATT |
2012-07-10 |
Richard Genoud |
|
New |
| [RFC] bcm47xxsflash: just use memcpy for reading |
2012-09-19 |
Rafał Miłecki |
|
New |
| drivers/mtd/devices/spear_smi.c: failure test for null rather than negative integer |
2012-07-11 |
Julia Lawall |
|
New |
| mtd: nand/docg4: fix oob reads |
2012-07-11 |
Mike Dunn |
|
New |
| [RFC,4/4] mtd: cfi_cmdset_0002: Add support for writing OTP memory |
2013-02-28 |
Christian Riesch |
|
New |
| [1/1] MTD: atmel nand: fix gpio missing request |
2012-07-12 |
Jean-Christophe PLAGNIOL-VILLARD |
|
New |
| [RFC,2/4] mtd: cfi_cmdset_0002: Add support for reading OTP memory of Micron M29EW |
2013-02-28 |
Christian Riesch |
|
New |
| [1/1,v2] MTD: atmel nand: fix gpio missing request |
2012-07-12 |
Jean-Christophe PLAGNIOL-VILLARD |
|
New |
| [v2] nandsim: Introduce debugfs infrastructure |
2012-12-03 |
Ezequiel Garcia |
|
New |
| ARM: LPC32xx: Adjust to pl08x DMA interface changes |
2012-07-12 |
stigge@antcom.de |
|
New |
| [2/2] mtd: lpc32xx_mlc: Adjust to pl08x DMA interface changes |
2012-07-12 |
stigge@antcom.de |
|
New |
| [2/2] mtd: remove nftl support |
2013-03-06 |
Artem Bityutskiy |
|
New |
| [2/6] mtd: s3c2410: Use pr_* instead of printk |
2012-07-16 |
Sachin Kamat |
|
New |
| [2/2] mtd: maps: physmap_of: Add GPIO VPP control |
2012-07-12 |
Pawel Moll |
|
New |
| [2/2] mtd: esb2rom: rework ROM scanning and resources |
2012-07-12 |
Aaron Sierra |
|
New |
| [3/6] mtd: s3c2410: Use <linux/io.h> instead of <asm/io.h> |
2012-07-16 |
Sachin Kamat |
|
New |
| [1/2] mtd: esb2rom: convert to MFD model |
2012-07-12 |
Aaron Sierra |
|
New |
| mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver |
2012-07-13 |
Brian Norris |
|
New |
| [1/2] mtd: doc: remove support for DoC 2000/2001/2001+ |
2013-03-06 |
Artem Bityutskiy |
|
New |
| [4/6] mtd: s3c2410: Do not initialise statics to 0 or NULL |
2012-07-16 |
Sachin Kamat |
|
New |
| [1/2] mtd: lpc32xx_slc: Adjust to pl08x DMA interface changes |
2012-07-12 |
stigge@antcom.de |
|
New |
| [1/2] MTD: autcpu12-nvram: Fix compile breakage |
2012-07-15 |
Alexander Shiyan |
|
New |
| UBIFS fails to mount on second boot |
2012-07-14 |
Artem Bityutskiy |
|
New |
| UBIFS: fix a bug in empty space fix-up |
2012-07-15 |
Artem Bityutskiy |
|
New |
| [2/2] UBIFS: simplify reply code a bit |
2012-07-15 |
Artem Bityutskiy |
|
New |
| [2/2] MTD: autcpu12-nvram: Convert to platform_device |
2012-07-15 |
Alexander Shiyan |
|
New |
| [1/2] UBIFS: add debugfs knob to switch to R/O mode |
2012-07-15 |
Artem Bityutskiy |
|
New |
| [21/21] mtd: omap2: allow bulding as a module |
2013-04-23 |
Arnd Bergmann |
|
New |
| [5/6] mtd: s3c2410: Fix checkpatch warnings and errors related to whitespaces |
2012-07-16 |
Sachin Kamat |
|
New |
| [1/6] mtd: s3c2410: Use module_platform_driver() |
2012-07-16 |
Sachin Kamat |
|
New |
| [6/6] mtd: s3c2410: Fix line over 80 characters warning |
2012-07-16 |
Sachin Kamat |
|
New |
| [4/6,Resend] mtd: s3c2410: Do not initialise statics to 0 or NULL |
2012-07-16 |
Sachin Kamat |
|
New |
| mtd: gpmi: fix the compiler warnings |
2012-07-17 |
Huang Shijie |
|
New |
| [v2] mtd: gpmi: fix the compiler warnings |
2012-07-17 |
Huang Shijie |
|
New |
| [v3] mtd: gpmi: fix the compiler warnings |
2012-07-17 |
Huang Shijie |
|
New |
| [v2,1/2] mtd: check for max_bitflips in mtd_read_oob() |
2012-07-17 |
Brian Norris |
|
New |
| [v2,2/2] mtd: nand: remove unused 'int' return codes |
2012-07-17 |
Brian Norris |
|
New |
| MTD: devices: Add support for serial flash STM/Micron N25Q032 |
2012-07-17 |
Dirk Behme |
|
New |
| [1/5] ubi: introduce ubi->bad_peb_limit |
2012-07-18 |
Artem Bityutskiy |
|
New |
| [2/3] UBI: limit amount of reserved eraseblocks for bad PEB handling |
2012-07-18 |
Artem Bityutskiy |
|
New |
| [1/3] UBI: introduce new bad PEB limit |
2012-07-18 |
Artem Bityutskiy |
|
New |
| [3/3] UBI: kill CONFIG_MTD_UBI_BEB_RESERVE |
2012-07-18 |
Artem Bityutskiy |
|
New |
| [2/2] mtd: maps: physmap_of: Add VPP regulator control |
2012-07-18 |
Pawel Moll |
|
New |
| [v2,1/2] mtd: maps: physmap: Add VPP regulator control |
2012-07-18 |
Pawel Moll |
|
New |
| [v2] mtd: omap: nand: Remove 0xFF's that prefixed 16bit NAND commands |
2012-10-26 |
Christopher Harvey |
|
New |
| [04/29] ARM: OMAP1: Move board-ams-delta.h from plat to mach |
2012-09-19 |
Tony Lindgren |
|
New |
| [V6] mtd: m25p80: Make fast read configurable via DT |
2012-09-24 |
Marek Vasut |
|
New |
| nand omap2: fix some typos in comments |
2012-07-19 |
Peter Meerwald |
|
New |
| [v2,1/2] mtd: fix wrong usage of ioremap_nocache() in uclinux.c map driver |
2012-07-19 |
Greg Ungerer |
|
New |
| [v2,2/2] mtd: allow uclinux map driver to be used on any ColdFire CPU platform |
2012-07-19 |
Greg Ungerer |
|
New |
| [v2] mtd: physmap_of: Add "no-unaligned-direct-access" DT property |
2012-07-19 |
Stefan Roese |
|
New |
| [GIT,PULL] UBIFS fix for 3.6-rc8 |
2012-07-20 |
Artem Bityutskiy |
|
New |
| [2/2] MTD: MIPS: lantiq: Add NAND support on Lantiq XWAY SoC. |
2012-07-22 |
John Crispin |
|
New |
| [1/2] MTD: check for valid pdata inside plat_nand |
2012-07-22 |
John Crispin |
|
New |
| [GIT,PULL] UBI changes for 3.6-rc1 |
2012-07-23 |
Artem Bityutskiy |
|
New |
| [v2,1/2] mtd: sh_flctl: Setup and release DMA channels |
2012-09-24 |
Bastian Hecht |
|
New |
| [GIT,PULL] UBIFS changes for 3.6-rc1 |
2012-07-23 |
Artem Bityutskiy |
|
New |
| [v4,19/31] fs: add read_iter and write_iter to several file systems |
2012-11-21 |
Dave Kleikamp |
|
New |
| mtd: bcm47xxsflash: just use memcpy_fromio for reading |
2012-09-20 |
Rafał Miłecki |
|
New |
| [v2,2/2] mtd: sh_flctl: Use DMA for data fifo FLTDFIFO when available |
2012-09-24 |
Bastian Hecht |
|
New |
| [2/2] mtd: nand: Select MXS_DMA for MTD_NAND_GPMI_NAND |
2012-07-24 |
Fabio Estevam |
|
New |
| [1/2] mtd: nand: Include IMX6 in the list of supported SoCs |
2012-07-24 |
Fabio Estevam |
|
New |
| mtd cs553x_nand: Initialise ecc.strength before nand_scan() |
2012-11-21 |
Nathan Williams |
|
New |
| [v4,2/3] mtd: devices: elm: Add support for ELM error correction |
2013-01-04 |
Philip, Avinash |
|
New |
| [v2,3/3] ARM: imx_v6_v7_defconfig: Select MXS_DMA |
2012-07-25 |
Fabio Estevam |
|
New |
| [v4,3/3] mtd: nand: omap2: Support for hardware BCH error correction. |
2013-01-04 |
Philip, Avinash |
|
New |
| [v2,1/3] mtd: nand: Include IMX6 in the list of supported SoCs |
2012-07-25 |
Fabio Estevam |
|
New |
| [v2,2/3] mtd: nand: Let MTD_NAND_GPMI_NAND depend on MXS_DMA |
2012-07-25 |
Fabio Estevam |
|
New |
| mtd: omap2-nand: avoid unaligned DMA accesses, fall back on prefetch method |
2012-09-20 |
Arnout Vandecappelle |
|
New |
| mtd: gpmi-nand: fix build error when MXS_DMA is not configured |
2012-07-26 |
Richard Zhao |
|
New |
| [v2,3/3] ARM: imx_v6_v7_defconfig: Select MXS_DMA |
2012-07-26 |
Dong Aisheng |
|
New |
| [RESEND] mtd: fix kfree bcm47xxsflash |
2013-05-22 |
Libo Chen |
|
New |
| [7/9] mtd: maps: add const qualifiers |
2013-03-12 |
Artem Bityutskiy |
|
New |
| [03/10] mtd: remove the mbx860 map driver |
2013-03-12 |
Artem Bityutskiy |
|
New |
| [08/10] mtd: remove the tqm8xxl map driver |
2013-03-12 |
Artem Bityutskiy |
|
New |
| [09/10] mtd: remove the dilnetpc map driver support |
2013-03-12 |
Artem Bityutskiy |
|
New |
| [10/10] mtd: remove the mbx860 map driver |
2013-03-12 |
Artem Bityutskiy |
|
New |
| mtd: mxc_nand: Fix compiler warnings |
2012-07-28 |
Dirk Behme |
|
New |
| [02/10] mtd: remove the dmv182 map driver |
2013-03-12 |
Artem Bityutskiy |
|
New |
| [1/2] nand: nand_bbt: Export nand_update_bbt |
2012-07-28 |
Fabio Estevam |
|
New |
| [01/10] mtd: remove the dbox2-flash map driver |
2013-03-12 |
Artem Bityutskiy |
|
New |
| [2/2] nand: Kconfig: Allow MTD_NAND_GPMI_NAND to be built as module |
2012-07-28 |
Fabio Estevam |
|
New |
| nand: Kconfig: Allow MTD_NAND_GPMI_NAND to be built as module |
2012-07-28 |
Fabio Estevam |
|
New |
| [1/2] nand: nand_bbt: Export nand_update_bbt |
2012-07-28 |
Fabio Estevam |
|
New |
| [3/6] mtd: bcm47xxnflash: init NAND on BCM4706 |
2012-09-27 |
Rafał Miłecki |
|
New |
| [1/5] arm: sam9_l9260_defconfig: prepare to UBI config change |
2012-07-30 |
Artem Bityutskiy |
|
New |
