mbox series

[v6,0/2] Add Macronix raw NAND controller driver

Message ID 1564631710-30276-1-git-send-email-masonccyang@mxic.com.tw
Headers show
Series Add Macronix raw NAND controller driver | expand

Message

Mason Yang Aug. 1, 2019, 3:55 a.m. UTC 
Hi,

v6 patch including:
1. compatible rename to "mxicy,multi-itfc-v009-nand-morph"
2. remove xxx_clk to xxx in DTS and driver.
3. patch mxic_nfc_data_xfer()

v5 patch including:
1. compatible rename to "macronix,nand-controller"
2. handle three clock in one
3. other minor patches

v4 patch back to only raw NAND controller driver instead of MFD,
raw NAND and SPI driver. This is based on MFD maintainer, Lee Jones
comments:
MFD is for registering child devices of chips which offer genuine
cross-subsystem functionality.
It is not designed for mode selecting, or as a place to shove shared code 
just because a better location doesn't appear to exist. 

v3 patch is to rename the title of SPI controller driver.
"Patch Macronix SPI controller driver according to MX25F0A MFD driver"

v2s patches is to support Macronix MX25F0A MFD driver 
for raw nand and spi controller which is separated 
form previous patchset:

https://patchwork.kernel.org/patch/10874679/

thanks for your review.

best regards,
Mason


Mason Yang (2):
  mtd: rawnand: Add Macronix raw NAND controller driver
  dt-bindings: mtd: Document Macronix raw NAND controller bindings

 .../devicetree/bindings/mtd/mxic-nand.txt          |  19 +
 drivers/mtd/nand/raw/Kconfig                       |   6 +
 drivers/mtd/nand/raw/Makefile                      |   1 +
 drivers/mtd/nand/raw/mxic_nand.c                   | 554 +++++++++++++++++++++
 4 files changed, 580 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/mxic-nand.txt
 create mode 100644 drivers/mtd/nand/raw/mxic_nand.c