[GIT,PULL] Renesas ARM64 Based SoC DT Updates for v4.20

Hi Olof, Hi Kevin, Hi Arnd, Please consider these Renesas ARM64 based SoC DT updates for v4.20. I am sending out this pull-request at this time as there are a number of patches queued up in my arm (32) DT branch and I hope that this will ease the burden later on in the development cycle. I expect to send a follow-up pull-request for this branch at the usual pre-rc6 timing. Highlights of this pull request: * New SoC: RZ/G2M (r8a774a1) * New Board: R-Car M3-N (r8a77965) based ULCB * And, as usual, increased hardware coverage a variety of SoCs and their boards The following changes since commit 5b394b2ddf0347bef56e50c69a58773c94343ff3: Linux 4.19-rc1 (2018-08-26 14:11:59 -0700) are available in the git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm64-dt-for-v4.20 for you to fetch changes up to 450d6079e8d3c40c7ce67ac8bb4a2da9baf56613: arm64: dts: r8a77965: add FDP1 device nodes (2018-09-13 09:48:13 +0200) ---------------------------------------------------------------- Renesas ARM64 Based SoC DT Updates for v4.20 * Correct whitespace around assignments * R-Car Gen-3 SoCs: - Enable SDR104 for SD devices - Include R-Car product name in DTSI files to ease maintenance * R-Car Gen-3 SoC based boards: Convert to new LVDS DT bindings * R-Car Gen 3 Salvator-X and Salvator-XS boards: - Override secondary addresses of ADV748x to avoid address conflicts * R-Car Gen 3 based Salvator-XS board: Enable SATA * R-Car M3-N (r8a77965) SoC: - Add FDP1 device nodes - Move arm_cc630p and timer nodes to restore sort-order of file - Correct clock/reset for usb2_phy1 - Correct HS-USB compat string - Add OPPs table for cpu devices enabling CPUFreq support - Add CAN device placeholder nodes to facilitate adding initial device tree for KF daughter board - Attach SYS-DMAC to the IPMMU * R-Car M3-N (r8a77965) based ULCB board: - Initial device tree for board and KF daughter board * R-Car E3 (r8a77990) SoC: - Add SYS-DMAC, I2C VIN, CSI-2, MSIOF device nodes - Add BRG support to SCIF2 which allows an increase in serial clock accuracy - Use CPG/MSSR and SYSC binding definitions * R-Car E3 (r8a77990) based Ebisu board: Enable PWM * R-Car D3 (r8a77995) SoC: Attach the SYS-DMAC to the IPMMU * R-Car D3 (r8a77995) based Draak board: Sort device nodes * R-Car V3H (r8a77980) based V3HSK board: - Move lvds0 node to restore sort-order of file * R-Car V3H (r8a77980) SoC: - Add RWDT, CSI2 and VIN, Cortex-A53 PMU nodes - Move IPMMU and CAN clock nodes to restore sort-order of file * R-Car V3M (r8a77970) SoC: - Add MMC nodes - Move CAN clock node to restore sort-order of file * R-Car V3M (r8a77970) based V3MSK board: Add eMMC support * R-Car V3H (r8a77980) based Condor board: Add PCIe, DU, LVDS and HDMI support * RZ/G2M (r8a774a1) SoC: - Initial device tree - Add SYS-DMAC, SCIF, HSCIF, INTC-EX, EtherAVB, RWDT, pinctl, GPIO, SDHI, I2C, IIC-DVFS, thermal, IPMMU, MSIOF, Cortex-A53 CPU core, PWM, Audio, FCPF, FCPV, USB2.0, USB-DMAC, HSUSB and USB3.0 device nodes ---------------------------------------------------------------- Biju Das (12): arm64: dts: renesas: Initial r8a774a1 SoC device tree arm64: dts: renesas: r8a774a1: Add SYS-DMAC controller nodes arm64: dts: renesas: r8a774a1: Add INTC-EX device node arm64: dts: renesas: r8a774a1: Add RWDT node arm64: dts: renesas: r8a774a1: Add I2C and IIC-DVFS support arm64: dts: renesas: r8a774a1: Add RZ/G2M thermal support arm64: dts: renesas: r8a774a1: Add all MSIOF nodes arm64: dts: renesas: r8a774a1: Add Cortex-A53 CPU cores arm64: dts: renesas: r8a774a1: Add audio support arm64: dts: renesas: r8a774a1: Add USB2.0 phy and host(EHCI/OHCI) device nodes arm64: dts: renesas: r8a774a1: Add USB-DMAC and HSUSB device nodes arm64: dts: renesas: r8a774a1: Add USB3.0 device nodes Dien Pham (1): arm64: dts: renesas: r8a77965: Add OPPs table for cpu devices Eugeniu Rosca (3): arm64: dts: renesas: r8a77965: Add CAN{0,1} placeholder nodes arm64: dts: renesas: r8a77965: m3nulcb: Initial device tree arm64: dts: renesas: r8a77965: m3nulcb-kf: Initial device tree Fabrizio Castro (8): arm64: dts: renesas: r8a774a1: Add SCIF and HSCIF nodes arm64: dts: renesas: r8a774a1: Add Ethernet AVB node arm64: dts: renesas: r8a774a1: Add pinctrl device node arm64: dts: renesas: r8a774a1: Add GPIO device nodes arm64: dts: renesas: r8a774a1: Add SDHI nodes arm64: dts: renesas: r8a774a1: Add IPMMU device nodes arm64: dts: renesas: r8a774a1: Add PWM device nodes arm64: dts: renesas: r8a774a1: Add FCPF and FCPV instances Geert Uytterhoeven (10): arm64: dts: renesas: Fix whitespace around assignments arm64: dts: renesas: v3hsk: Move lvds0 node arm64: dts: renesas: r8a77965: Move timer node arm64: dts: renesas: r8a77965: Fix HS-USB compatible arm64: dts: renesas: r8a77965: Fix clock/reset for usb2_phy1 arm64: dts: renesas: salvator-xs: Improve SATA switch settings comments arm64: dts: renesas: r8a77990: Use CPG/MSSR and SYSC binding definitions arm64: dts: renesas: r8a7795: Move arm_cc630p node arm64: dts: renesas: r8a77990: Add all MSIOF nodes arm64: dts: renesas: draak: Sort device nodes Hoan Nguyen An (1): arm64: dts: r8a77965: add FDP1 device nodes Kieran Bingham (1): arm64: dts: renesas: salvator-common: adv748x: Override secondary addresses Koji Matsuoka (1): arm64: dts: renesas: r8a77990: Add VIN and CSI-2 device nodes Laurent Pinchart (1): arm64: dts: renesas: Convert to new LVDS DT bindings Magnus Damm (3): arm64: dts: renesas: Include R-Car product name in DTSI files arm64: dts: renesas: r8a77995: Attach the SYS-DMAC to the IPMMU arm64: dts: renesas: r8a77965: Attach the SYS-DMAC to the IPMMU Sergei Shtylyov (10): arm64: dts: renesas: r8a77980: add RWDT support arm64: dts: renesas: r8a77980: add Cortex-A53 PMU support arm64: dts: renesas: r8a77980: move IPMMU nodes arm64: dts: renesas: r8a779{7|8}0: move CAN clock node arm64: dts: renesas: r8a77980: add CSI2/VIN support arm64: dts: renesas: r8a77970: add MMC support arm64: dts: renesas: v3msk: add eMMC support arm64: dts: renesas: condor/v3hsk: add DU/LVDS/HDMI support arm64: dts: renesas: r8a77980: add PCIe support arm64: dts: renesas: condor: add PCIe support Takeshi Kihara (4): arm64: dts: renesas: r8a77965: Add SATA controller node arm64: dts: renesas: r8a77990: Add BRG support to SCIF2 arm64: dts: renesas: r8a77990: Add I2C device nodes arm64: dts: renesas: r8a77990: Add SYS-DMAC device nodes Wolfram Sang (2): arm64: dts: renesas: salvator-xs: enable SATA arm64: dts: renesas: enable SDR104 on R-Car Gen3 Yoshihiro Shimoda (1): arm64: dts: renesas: r8a77990: Enable PWM for Ebisu board arch/arm64/boot/dts/renesas/Makefile | 2 + arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 1664 ++++++++++++++++++++ .../boot/dts/renesas/r8a7795-es1-salvator-x.dts | 3 +- arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi | 18 +- arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 3 +- arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 3 +- .../arm64/boot/dts/renesas/r8a7795-salvator-xs.dts | 17 +- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 104 +- arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 3 +- arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 3 +- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 86 +- .../arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts | 16 + arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts | 33 + .../boot/dts/renesas/r8a77965-salvator-xs.dts | 14 + arch/arm64/boot/dts/renesas/r8a77965.dtsi | 155 +- arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 26 + arch/arm64/boot/dts/renesas/r8a77970.dtsi | 36 +- arch/arm64/boot/dts/renesas/r8a77980-condor.dts | 123 ++ arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts | 134 ++ arch/arm64/boot/dts/renesas/r8a77980.dtsi | 580 ++++++- arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts | 24 + arch/arm64/boot/dts/renesas/r8a77990.dtsi | 478 +++++- arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 276 ++-- arch/arm64/boot/dts/renesas/r8a77995.dtsi | 14 +- arch/arm64/boot/dts/renesas/salvator-common.dtsi | 7 +- arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 2 +- arch/arm64/boot/dts/renesas/ulcb.dtsi | 1 + 27 files changed, 3462 insertions(+), 363 deletions(-) create mode 100644 arch/arm64/boot/dts/renesas/r8a774a1.dtsi create mode 100644 arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts

Message ID	cover.1536828567.git.horms+renesas@verge.net.au
State	New
Headers	show Return-Path: <linux-arm-kernel-bounces+incoming-imx=patchwork.ozlabs.org@lists.infradead.org> From: Simon Horman <horms+renesas@verge.net.au> To: arm@kernel.org Subject: [GIT PULL] Renesas ARM64 Based SoC DT Updates for v4.20 Date: Thu, 13 Sep 2018 11:09:49 +0200 Message-Id: <cover.1536828567.git.horms+renesas@verge.net.au> MIME-Version: 1.0 summary: Content analysis details: (-2.2 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at http://www.dnswl.org/, medium trust [202.4.237.240 listed in list.dnswl.org] 0.2 HEADER_FROM_DIFFERENT_DOMAINS From and EnvelopeFrom 2nd level mail domains are different -0.0 SPF_PASS SPF: sender matches SPF record 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain Precedence: list Cc: Arnd Bergmann <arnd@arndb.de>, Kevin Hilman <khilman@kernel.org>, Magnus Damm <magnus.damm@gmail.com>, linux-renesas-soc@vger.kernel.org, Olof Johansson <olof@lixom.net>, Simon Horman <horms+renesas@verge.net.au>, linux-arm-kernel@lists.infradead.org Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+incoming-imx=patchwork.ozlabs.org@lists.infradead.org
Series	[GIT,PULL] Renesas ARM64 Based SoC DT Updates for v4.20 \| expand [45/58] arm64: dts: renesas: r8a77965: Move timer node [GIT,PULL] Renesas ARM64 Based SoC DT Updates for v4.20

[GIT,PULL] Renesas ARM64 Based SoC DT Updates for v4.20

Pull-request

Message

Comments