| Message ID | cover.1501514100.git.horms+renesas@verge.net.au |
|---|---|
| State | New |
| Headers | show |
On Mon, Jul 31, 2017 at 5:19 PM, Simon Horman <horms+renesas@verge.net.au> wrote: > Renesas ARM Based SoC DT Updates for v4.14 > > Changes of note: > > * Add pin controller support to the RZ/G1M (r8a7743) SoC and > RZ/A1 (r7s72100) SoCs now that the driver is available in v4.13-rc1. > > * Add GPIO support to the RZ/G1M (r8a7743) SoC now that the driver > is availabe in v4.13-rc1. > > * Enable MMCIF0 and Ethernet AVB support on the RZ/G1M (r8a7743) SoC and > the iWave-RZG1M-20M Qseven SOM. This depends on newly added pin > controller support noted above. > > * Use R-Car Gen 2 fallback binding for vin nodes > > This makes binding use consistent across R-Car Gen 2 SoCs. > It does not have any run-time effect > > * Use SMP jump stub SRAM region from DT on R-Car Gen 2 SoCs > > Geert Uytterhoeven says, "The R-Car Gen2 platform code for CPU core > bringup needs to copy a jump stub to on-SoC SRAM. Currently it uses a > hardcoded address pointing to ICRAM1." > > * Add Inter Connect RAM to R-Car Gen 2 and RZ/G1 SoCs > > Geert Uytterhoeven says, "R-Car Gen2 and RZ/G1 SoCs contain two or three > blocks of SRAM, which can be used for several purposes. One such purpose > is holding a jump stub for CPU core bringup." > * Use generic compatible string for I2C EEPROM for RZ/A1 (r7s72100) SoC > and koelsch board. > > This is part of a tree-wide cleanup by Javier Martinez Canillas Pulled into next/dt, thanks! Arnd
Hi Olof, Hi Kevin, Hi Arnd, Please consider these Renesas ARM based SoC DT updates for v4.14. The following changes since commit 5771a8c08880cdca3bfb4a3fc6d309d6bba20877: Linux v4.13-rc1 (2017-07-15 15:22:10 -0700) are available in the git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.14 for you to fetch changes up to bf38b9ac16c5c8a82d63c79391dd64c5924fc00b: ARM: dts: iwg20m: Correct indentation of mmcif0 properties (2017-07-31 17:10:14 +0200) ---------------------------------------------------------------- Renesas ARM Based SoC DT Updates for v4.14 Changes of note: * Add pin controller support to the RZ/G1M (r8a7743) SoC and RZ/A1 (r7s72100) SoCs now that the driver is available in v4.13-rc1. * Add GPIO support to the RZ/G1M (r8a7743) SoC now that the driver is availabe in v4.13-rc1. * Enable MMCIF0 and Ethernet AVB support on the RZ/G1M (r8a7743) SoC and the iWave-RZG1M-20M Qseven SOM. This depends on newly added pin controller support noted above. * Use R-Car Gen 2 fallback binding for vin nodes This makes binding use consistent across R-Car Gen 2 SoCs. It does not have any run-time effect * Use SMP jump stub SRAM region from DT on R-Car Gen 2 SoCs Geert Uytterhoeven says, "The R-Car Gen2 platform code for CPU core bringup needs to copy a jump stub to on-SoC SRAM. Currently it uses a hardcoded address pointing to ICRAM1." * Add Inter Connect RAM to R-Car Gen 2 and RZ/G1 SoCs Geert Uytterhoeven says, "R-Car Gen2 and RZ/G1 SoCs contain two or three blocks of SRAM, which can be used for several purposes. One such purpose is holding a jump stub for CPU core bringup." * Use generic compatible string for I2C EEPROM for RZ/A1 (r7s72100) SoC and koelsch board. This is part of a tree-wide cleanup by Javier Martinez Canillas ---------------------------------------------------------------- Biju Das (4): ARM: dts: r8a7743: Add GPIO support ARM: dts: iwg20d-q7: Add pinctl support for scif0 ARM: dts: r8a7743: Add Ethernet AVB support ARM: dts: iwg20d-q7: Add Ethernet AVB support Chris Brandt (4): ARM: dts: rskrza1: Add SCIF2 pin group ARM: dts: rskrza1: Add Ethernet pin group ARM: dts: rskrza1: Add SDHI1 pin group ARM: dts: rskrza1: Add LED0 pin support Chris Paterson (2): ARM: dts: r8a7743: Add MMCIF0 support ARM: dts: iwg20m: Add MMCIF0 support Geert Uytterhoeven (15): ARM: dts: r8a7743: Add Inter Connect RAM ARM: dts: r8a7745: Add Inter Connect RAM ARM: dts: r8a7790: Add Inter Connect RAM ARM: dts: r8a7791: Add Inter Connect RAM ARM: dts: r8a7792: Add Inter Connect RAM ARM: dts: r8a7793: Add Inter Connect RAM ARM: dts: r8a7794: Add Inter Connect RAM ARM: dts: r8a7743: Reserve SRAM for the SMP jump stub ARM: dts: r8a7745: Reserve SRAM for the SMP jump stub ARM: dts: r8a7790: Reserve SRAM for the SMP jump stub ARM: dts: r8a7791: Reserve SRAM for the SMP jump stub ARM: dts: r8a7792: Reserve SRAM for the SMP jump stub ARM: dts: r8a7793: Reserve SRAM for the SMP jump stub ARM: dts: r8a7794: Reserve SRAM for the SMP jump stub ARM: dts: iwg20m: Correct indentation of mmcif0 properties Jacopo Mondi (5): ARM: dts: r7s72100: Add pin controller node ARM: dts: genmai: Add SCIF2 pin group ARM: dts: genmai: Add RIIC2 pin group ARM: dts: genmai: Add user led device nodes ARM: dts: genmai: Add ethernet pin group Javier Martinez Canillas (2): ARM: dts: r7s72100: Add generic compatible string for I2C EEPROM ARM: dts: koelsch: Add generic compatible string for I2C EEPROM Sergei Shtylyov (3): ARM: dts: r8a7743: add PFC support ARM: dts: sk-rzg1m: add SCIF0 pins ARM: dts: sk-rzg1m: add Ether pins Simon Horman (3): ARM: dts: r8a7790: Use R-Car Gen 2 fallback binding for vin nodes ARM: dts: r8a7791: Use R-Car Gen 2 fallback binding for vin nodes ARM: dts: r8a7794: Use R-Car Gen 2 fallback binding for vin nodes arch/arm/boot/dts/r7s72100-genmai.dts | 71 ++++++++++++- arch/arm/boot/dts/r7s72100-rskrza1.dts | 61 +++++++++++ arch/arm/boot/dts/r7s72100.dtsi | 78 ++++++++++++++ arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 31 ++++++ arch/arm/boot/dts/r8a7743-iwg20m.dtsi | 26 +++++ arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 25 ++++- arch/arm/boot/dts/r8a7743.dtsi | 179 +++++++++++++++++++++++++++++++- arch/arm/boot/dts/r8a7745.dtsi | 23 ++++ arch/arm/boot/dts/r8a7790.dtsi | 26 ++++- arch/arm/boot/dts/r8a7791-koelsch.dts | 2 +- arch/arm/boot/dts/r8a7791.dtsi | 24 ++++- arch/arm/boot/dts/r8a7792.dtsi | 18 ++++ arch/arm/boot/dts/r8a7793.dtsi | 18 ++++ arch/arm/boot/dts/r8a7794.dtsi | 22 +++- 14 files changed, 591 insertions(+), 13 deletions(-)