| Message ID | cover.1454595846.git.horms+renesas@verge.net.au |
|---|---|
| State | New |
| Headers | show |
Hi, On Thu, Feb 04, 2016 at 03:30:02PM +0100, Simon Horman wrote: > Hi Olof, Hi Kevin, Hi Arnd, > > Please consider these Renesas ARM based SoC DT updates for v4.6. > > > The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d: > > Linux 4.5-rc1 (2016-01-24 13:06:47 -0800) > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.6 > > for you to fetch changes up to d7a11140d0a659e5c1f83627792f95b6713030a2: > > ARM: dts: silk: Enable SCIF_CLK frequency and pins (2016-02-02 14:02:28 +0100) > > ---------------------------------------------------------------- > Renesas ARM Based SoC DT Updates for v4.6 > > * Use SCIF and USBHS fallback compatibility strings > * Add Baud Rate Generator (BRG) support for (H)SCIF > * Enable SCIF_CLK frequency and pins > * Use GIC_* defines > * Migrate to generic l2c OF initialization on r8a7740 > * Enable audio on r8a7793/gose > * Enable HDMI vidio out on r8a7793 > * Enable i2c on r8a7793/gose > * Enable QSPI on alt > * Enable GPIO keys and leds on gise > * Enable audio on porter > * Enable DU on porter > > ---------------------------------------------------------------- > Geert Uytterhoeven (22): > ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization > ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers Hmm. Those aren't DT changes. There's also nothing for r8a7740 to convert L2 init to DT earlier in this branch, which makes this look like it's just a generic cleanup that should go in independently in your cleanup branch. Or am I missing some dependency that isn't obvious? If I'm not, then please respin this branch and move those to the place they belong (cleanup). Thanks! -Olof
Hi Olof, On Mon, Feb 8, 2016 at 10:51 PM, Olof Johansson <olof@lixom.net> wrote: > On Thu, Feb 04, 2016 at 03:30:02PM +0100, Simon Horman wrote: >> Please consider these Renesas ARM based SoC DT updates for v4.6. >> >> >> The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d: >> >> Linux 4.5-rc1 (2016-01-24 13:06:47 -0800) >> >> are available in the git repository at: >> >> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.6 >> >> for you to fetch changes up to d7a11140d0a659e5c1f83627792f95b6713030a2: >> >> ARM: dts: silk: Enable SCIF_CLK frequency and pins (2016-02-02 14:02:28 +0100) >> >> ---------------------------------------------------------------- >> Renesas ARM Based SoC DT Updates for v4.6 >> >> * Use SCIF and USBHS fallback compatibility strings >> * Add Baud Rate Generator (BRG) support for (H)SCIF >> * Enable SCIF_CLK frequency and pins >> * Use GIC_* defines >> * Migrate to generic l2c OF initialization on r8a7740 >> * Enable audio on r8a7793/gose >> * Enable HDMI vidio out on r8a7793 >> * Enable i2c on r8a7793/gose >> * Enable QSPI on alt >> * Enable GPIO keys and leds on gise >> * Enable audio on porter >> * Enable DU on porter >> >> ---------------------------------------------------------------- >> Geert Uytterhoeven (22): >> ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization >> ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers > > Hmm. Those aren't DT changes. There's also nothing for r8a7740 to convert > L2 init to DT earlier in this branch, which makes this look like it's just > a generic cleanup that should go in independently in your cleanup branch. > > Or am I missing some dependency that isn't obvious? If I'm not, then please > respin this branch and move those to the place they belong (cleanup). The dependency is commit 374e70075e58acfe ("ARM: shmobile: r8a7740 dtsi: Add L2 cache-controller node"), which has already entered mainline in v4.5-rc1. So I agree with your comments. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
On Tue, Feb 09, 2016 at 08:39:31AM +0100, Geert Uytterhoeven wrote: > Hi Olof, > > On Mon, Feb 8, 2016 at 10:51 PM, Olof Johansson <olof@lixom.net> wrote: > > On Thu, Feb 04, 2016 at 03:30:02PM +0100, Simon Horman wrote: > >> Please consider these Renesas ARM based SoC DT updates for v4.6. > >> > >> > >> The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d: > >> > >> Linux 4.5-rc1 (2016-01-24 13:06:47 -0800) > >> > >> are available in the git repository at: > >> > >> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.6 > >> > >> for you to fetch changes up to d7a11140d0a659e5c1f83627792f95b6713030a2: > >> > >> ARM: dts: silk: Enable SCIF_CLK frequency and pins (2016-02-02 14:02:28 +0100) > >> > >> ---------------------------------------------------------------- > >> Renesas ARM Based SoC DT Updates for v4.6 > >> > >> * Use SCIF and USBHS fallback compatibility strings > >> * Add Baud Rate Generator (BRG) support for (H)SCIF > >> * Enable SCIF_CLK frequency and pins > >> * Use GIC_* defines > >> * Migrate to generic l2c OF initialization on r8a7740 > >> * Enable audio on r8a7793/gose > >> * Enable HDMI vidio out on r8a7793 > >> * Enable i2c on r8a7793/gose > >> * Enable QSPI on alt > >> * Enable GPIO keys and leds on gise > >> * Enable audio on porter > >> * Enable DU on porter > >> > >> ---------------------------------------------------------------- > >> Geert Uytterhoeven (22): > >> ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization > >> ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers > > > > Hmm. Those aren't DT changes. There's also nothing for r8a7740 to convert > > L2 init to DT earlier in this branch, which makes this look like it's just > > a generic cleanup that should go in independently in your cleanup branch. > > > > Or am I missing some dependency that isn't obvious? If I'm not, then please > > respin this branch and move those to the place they belong (cleanup). > > The dependency is commit 374e70075e58acfe ("ARM: shmobile: r8a7740 dtsi: Add > L2 cache-controller node"), which has already entered mainline in v4.5-rc1. > > So I agree with your comments. Sorry for the mix-up. I'll see about respinning this.
Hi, On Tue, Feb 9, 2016 at 10:39 AM, Simon Horman <horms@verge.net.au> wrote: > On Tue, Feb 09, 2016 at 08:39:31AM +0100, Geert Uytterhoeven wrote: >> Hi Olof, >> >> On Mon, Feb 8, 2016 at 10:51 PM, Olof Johansson <olof@lixom.net> wrote: >> > On Thu, Feb 04, 2016 at 03:30:02PM +0100, Simon Horman wrote: >> >> Please consider these Renesas ARM based SoC DT updates for v4.6. >> >> >> >> >> >> The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d: >> >> >> >> Linux 4.5-rc1 (2016-01-24 13:06:47 -0800) >> >> >> >> are available in the git repository at: >> >> >> >> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.6 >> >> >> >> for you to fetch changes up to d7a11140d0a659e5c1f83627792f95b6713030a2: >> >> >> >> ARM: dts: silk: Enable SCIF_CLK frequency and pins (2016-02-02 14:02:28 +0100) >> >> >> >> ---------------------------------------------------------------- >> >> Renesas ARM Based SoC DT Updates for v4.6 >> >> >> >> * Use SCIF and USBHS fallback compatibility strings >> >> * Add Baud Rate Generator (BRG) support for (H)SCIF >> >> * Enable SCIF_CLK frequency and pins >> >> * Use GIC_* defines >> >> * Migrate to generic l2c OF initialization on r8a7740 >> >> * Enable audio on r8a7793/gose >> >> * Enable HDMI vidio out on r8a7793 >> >> * Enable i2c on r8a7793/gose >> >> * Enable QSPI on alt >> >> * Enable GPIO keys and leds on gise >> >> * Enable audio on porter >> >> * Enable DU on porter >> >> >> >> ---------------------------------------------------------------- >> >> Geert Uytterhoeven (22): >> >> ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization >> >> ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers >> > >> > Hmm. Those aren't DT changes. There's also nothing for r8a7740 to convert >> > L2 init to DT earlier in this branch, which makes this look like it's just >> > a generic cleanup that should go in independently in your cleanup branch. >> > >> > Or am I missing some dependency that isn't obvious? If I'm not, then please >> > respin this branch and move those to the place they belong (cleanup). >> >> The dependency is commit 374e70075e58acfe ("ARM: shmobile: r8a7740 dtsi: Add >> L2 cache-controller node"), which has already entered mainline in v4.5-rc1. >> >> So I agree with your comments. > > Sorry for the mix-up. > I'll see about respinning this. I've merged the patches, so respinning won't work. Instead, please follow up with incremental fixes instead. -Olof
On Wed, Feb 10, 2016 at 07:55:30PM -0800, Olof Johansson wrote: > Hi, > > On Tue, Feb 9, 2016 at 10:39 AM, Simon Horman <horms@verge.net.au> wrote: > > On Tue, Feb 09, 2016 at 08:39:31AM +0100, Geert Uytterhoeven wrote: > >> Hi Olof, > >> > >> On Mon, Feb 8, 2016 at 10:51 PM, Olof Johansson <olof@lixom.net> wrote: > >> > On Thu, Feb 04, 2016 at 03:30:02PM +0100, Simon Horman wrote: > >> >> Please consider these Renesas ARM based SoC DT updates for v4.6. > >> >> > >> >> > >> >> The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d: > >> >> > >> >> Linux 4.5-rc1 (2016-01-24 13:06:47 -0800) > >> >> > >> >> are available in the git repository at: > >> >> > >> >> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.6 > >> >> > >> >> for you to fetch changes up to d7a11140d0a659e5c1f83627792f95b6713030a2: > >> >> > >> >> ARM: dts: silk: Enable SCIF_CLK frequency and pins (2016-02-02 14:02:28 +0100) > >> >> > >> >> ---------------------------------------------------------------- > >> >> Renesas ARM Based SoC DT Updates for v4.6 > >> >> > >> >> * Use SCIF and USBHS fallback compatibility strings > >> >> * Add Baud Rate Generator (BRG) support for (H)SCIF > >> >> * Enable SCIF_CLK frequency and pins > >> >> * Use GIC_* defines > >> >> * Migrate to generic l2c OF initialization on r8a7740 > >> >> * Enable audio on r8a7793/gose > >> >> * Enable HDMI vidio out on r8a7793 > >> >> * Enable i2c on r8a7793/gose > >> >> * Enable QSPI on alt > >> >> * Enable GPIO keys and leds on gise > >> >> * Enable audio on porter > >> >> * Enable DU on porter > >> >> > >> >> ---------------------------------------------------------------- > >> >> Geert Uytterhoeven (22): > >> >> ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization > >> >> ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers > >> > > >> > Hmm. Those aren't DT changes. There's also nothing for r8a7740 to convert > >> > L2 init to DT earlier in this branch, which makes this look like it's just > >> > a generic cleanup that should go in independently in your cleanup branch. > >> > > >> > Or am I missing some dependency that isn't obvious? If I'm not, then please > >> > respin this branch and move those to the place they belong (cleanup). > >> > >> The dependency is commit 374e70075e58acfe ("ARM: shmobile: r8a7740 dtsi: Add > >> L2 cache-controller node"), which has already entered mainline in v4.5-rc1. > >> > >> So I agree with your comments. > > > > Sorry for the mix-up. > > I'll see about respinning this. > > I've merged the patches, so respinning won't work. Instead, please > follow up with incremental fixes instead. Hi Olof, sorry once again for the mix-up. If you have already pulled this pull request then I am happy. However, I don't see it in the arm-soc tree and if you haven't pulled it and it isn't too much trouble I would like to re-spin as I have a further r8a7740 cleanup in the pipeline.
Simon, On Thu, Feb 11, 2016 at 9:22 AM, Simon Horman <horms@verge.net.au> wrote: > On Wed, Feb 10, 2016 at 07:55:30PM -0800, Olof Johansson wrote: >> Hi, >> >> On Tue, Feb 9, 2016 at 10:39 AM, Simon Horman <horms@verge.net.au> wrote: >> > On Tue, Feb 09, 2016 at 08:39:31AM +0100, Geert Uytterhoeven wrote: >> >> Hi Olof, >> >> >> >> On Mon, Feb 8, 2016 at 10:51 PM, Olof Johansson <olof@lixom.net> wrote: >> >> > On Thu, Feb 04, 2016 at 03:30:02PM +0100, Simon Horman wrote: >> >> >> Please consider these Renesas ARM based SoC DT updates for v4.6. >> >> >> >> >> >> >> >> >> The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d: >> >> >> >> >> >> Linux 4.5-rc1 (2016-01-24 13:06:47 -0800) >> >> >> >> >> >> are available in the git repository at: >> >> >> >> >> >> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.6 >> >> >> >> >> >> for you to fetch changes up to d7a11140d0a659e5c1f83627792f95b6713030a2: >> >> >> >> >> >> ARM: dts: silk: Enable SCIF_CLK frequency and pins (2016-02-02 14:02:28 +0100) >> >> >> >> >> >> ---------------------------------------------------------------- >> >> >> Renesas ARM Based SoC DT Updates for v4.6 >> >> >> >> >> >> * Use SCIF and USBHS fallback compatibility strings >> >> >> * Add Baud Rate Generator (BRG) support for (H)SCIF >> >> >> * Enable SCIF_CLK frequency and pins >> >> >> * Use GIC_* defines >> >> >> * Migrate to generic l2c OF initialization on r8a7740 >> >> >> * Enable audio on r8a7793/gose >> >> >> * Enable HDMI vidio out on r8a7793 >> >> >> * Enable i2c on r8a7793/gose >> >> >> * Enable QSPI on alt >> >> >> * Enable GPIO keys and leds on gise >> >> >> * Enable audio on porter >> >> >> * Enable DU on porter >> >> >> >> >> >> ---------------------------------------------------------------- >> >> >> Geert Uytterhoeven (22): >> >> >> ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization >> >> >> ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers >> >> > >> >> > Hmm. Those aren't DT changes. There's also nothing for r8a7740 to convert >> >> > L2 init to DT earlier in this branch, which makes this look like it's just >> >> > a generic cleanup that should go in independently in your cleanup branch. >> >> > >> >> > Or am I missing some dependency that isn't obvious? If I'm not, then please >> >> > respin this branch and move those to the place they belong (cleanup). >> >> >> >> The dependency is commit 374e70075e58acfe ("ARM: shmobile: r8a7740 dtsi: Add >> >> L2 cache-controller node"), which has already entered mainline in v4.5-rc1. >> >> >> >> So I agree with your comments. >> > >> > Sorry for the mix-up. >> > I'll see about respinning this. >> >> I've merged the patches, so respinning won't work. Instead, please >> follow up with incremental fixes instead. > > Hi Olof, > > sorry once again for the mix-up. > > If you have already pulled this pull request then I am happy. > However, I don't see it in the arm-soc tree and if you haven't pulled it > and it isn't too much trouble I would like to re-spin as I have a further > r8a7740 cleanup in the pipeline. Sorry for the confusion, my reply went to the wrong thread somehow. -Olof
Hi Olof, Hi Kevin, Hi Arnd, Please consider these Renesas ARM based SoC DT updates for v4.6. The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d: Linux 4.5-rc1 (2016-01-24 13:06:47 -0800) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.6 for you to fetch changes up to d7a11140d0a659e5c1f83627792f95b6713030a2: ARM: dts: silk: Enable SCIF_CLK frequency and pins (2016-02-02 14:02:28 +0100) ---------------------------------------------------------------- Renesas ARM Based SoC DT Updates for v4.6 * Use SCIF and USBHS fallback compatibility strings * Add Baud Rate Generator (BRG) support for (H)SCIF * Enable SCIF_CLK frequency and pins * Use GIC_* defines * Migrate to generic l2c OF initialization on r8a7740 * Enable audio on r8a7793/gose * Enable HDMI vidio out on r8a7793 * Enable i2c on r8a7793/gose * Enable QSPI on alt * Enable GPIO keys and leds on gise * Enable audio on porter * Enable DU on porter ---------------------------------------------------------------- Geert Uytterhoeven (22): ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers ARM: dts: r8a7778: Add SCIF fallback compatibility strings ARM: dts: r8a7779: Add SCIF fallback compatibility strings ARM: dts: r8a7790: Add SCIF fallback compatibility strings ARM: dts: r8a7791: Add SCIF fallback compatibility strings ARM: dts: r8a7793: Add SCIF fallback compatibility strings ARM: dts: r8a7794: Add SCIF fallback compatibility strings ARM: dts: r8a7778: Add BRG support for SCIF ARM: dts: r8a7779: Add BRG support for SCIF ARM: dts: r8a7790: Add BRG support for (H)SCIF ARM: dts: r8a7791: Add BRG support for (H)SCIF ARM: dts: r8a7793: Add BRG support for SCIF ARM: dts: r8a7794: Add BRG support for (H)SCIF ARM: dts: alt: Enable SCIF_CLK frequency and pins ARM: dts: bockw: Enable SCIF_CLK frequency and pins ARM: dts: gose: Enable SCIF_CLK frequency and pins ARM: dts: koelsch: Enable SCIF_CLK frequency and pins ARM: dts: lager: Enable SCIF_CLK frequency and pins ARM: dts: marzen: Enable SCIF_CLK frequency and pins ARM: dts: porter: Enable SCIF_CLK frequency and pins ARM: dts: silk: Enable SCIF_CLK frequency and pins Laurent Pinchart (11): ARM: dts: r8a7793: Add I2C master nodes to DT ARM: dts: sh73a0: Rename the serial port clock to fck ARM: dts: r7s72100: Rename the serial port clock to fck ARM: dts: r8a73a4: Rename the serial port clock to fck ARM: dts: r8a7740: Rename the serial port clock to fck ARM: dts: r8a7778: Rename the serial port clock to fck ARM: dts: r8a7779: Rename the serial port clock to fck ARM: dts: r8a7790: Rename the serial port clock to fck ARM: dts: r8a7791: Rename the serial port clock to fck ARM: dts: r8a7793: Rename the serial port clock to fck ARM: dts: r8a7794: Rename the serial port clock to fck Magnus Damm (1): ARM: dts: r8a7793: gose: Add HDMI video out support Sergei Shtylyov (3): ARM: dts: porter: add DU DT support ARM: dts: silk: add DU DT support ARM: dts: porter: add sound support Simon Horman (33): ARM: dts: gose: Add GPIO keys to DT ARM: dts: gose: Add GPIO leds to DT ARM: dts: alt: Add QSPI device to DT ARM: dts: r8a7790: use fallback usbhs compatibility string ARM: dts: r8a7791: use fallback usbhs compatibility string ARM: dts: r8a7794: use fallback usbhs compatibility string ARM: dts: r8a7793: move dmac nodes ARM: dts: gose: add i2c2 bus to device tree ARM: dts: r8a7790: use GIC_* defines ARM: dts: r8a7791: use GIC_* defines ARM: dts: r8a7793: use GIC_* defines ARM: dts: r8a7794: use GIC_* defines ARM: dts: r8a7778: use GIC_* defines ARM: dts: r8a7779: use GIC_* defines ARM: dts: r8a73a4: use GIC_* defines ARM: dts: r8a7740: use GIC_* defines ARM: dts: r8a7793: add MSTP10 clocks to device tree ARM: dts: r8a7793: add audio clock to device tree ARM: dts: r8a7793: add m2 clock to device tree ARM: dts: r8a7793: add R-Car sound support to device tree ARM: dts: r8a7793: add DVC support to device tree ARM: dts: r8a7793: add audio DMAC clocks to device tree ARM: dts: r8a7793: add audio DMAC to device tree ARM: dts: r8a7793: enable Audio DMAC peri peri via sound driver ARM: dts: gose: Enable sound PIO support in device tree ARM: dts: gose: enable sound DMA support in device tree ARM: dts: gose: enable sound DMA support via BUSIF in device tree ARM: dts: gose: enable sound DMA support via SRC in device tree ARM: dts: gose: enable sound DMA support via DVC in device tree ARM: dts: r8a7793: enable audio DMAC in device tree ARM: dts: r7s72100: use GIC_* defines ARM: dts: sh73a0: use GIC_* defines ARM: dts: emev2: use GIC_* defines arch/arm/boot/dts/emev2.dtsi | 39 +- arch/arm/boot/dts/r7s72100.dtsi | 177 +++---- arch/arm/boot/dts/r8a73a4.dtsi | 224 ++++----- arch/arm/boot/dts/r8a7740.dtsi | 161 +++---- arch/arm/boot/dts/r8a7778-bockw.dts | 13 + arch/arm/boot/dts/r8a7778.dtsi | 144 +++--- arch/arm/boot/dts/r8a7779-marzen.dts | 13 + arch/arm/boot/dts/r8a7779.dtsi | 135 +++--- arch/arm/boot/dts/r8a7790-lager.dts | 13 + arch/arm/boot/dts/r8a7790.dtsi | 441 +++++++++-------- arch/arm/boot/dts/r8a7791-koelsch.dts | 13 + arch/arm/boot/dts/r8a7791-porter.dts | 165 +++++++ arch/arm/boot/dts/r8a7791.dtsi | 514 ++++++++++---------- arch/arm/boot/dts/r8a7793-gose.dts | 304 ++++++++++++ arch/arm/boot/dts/r8a7793.dtsi | 758 ++++++++++++++++++++++++------ arch/arm/boot/dts/r8a7794-alt.dts | 59 +++ arch/arm/boot/dts/r8a7794-silk.dts | 122 +++++ arch/arm/boot/dts/r8a7794.dtsi | 362 +++++++------- arch/arm/boot/dts/sh73a0.dtsi | 186 ++++---- arch/arm/mach-shmobile/setup-r8a7740.c | 18 +- include/dt-bindings/clock/r8a7793-clock.h | 2 + 21 files changed, 2571 insertions(+), 1292 deletions(-)