diff mbox

[RFC,2/5] ARM: dts: am335x-baltos: use IRQ_TYPE_* to specify irq flags

Message ID CAGm1_kuKxVOetzMLdnVO+xQ7egX+paqOHLS+ckz6nFwKD5QBuQ@mail.gmail.com
State New
Headers show

Commit Message

Yegor Yefremov June 6, 2017, 2:33 p.m. UTC
On Wed, May 31, 2017 at 7:22 PM, Yegor Yefremov
<yegorslists@googlemail.com> wrote:
> Hi Uwe, Tony,
>
> On Wed, May 31, 2017 at 7:19 PM, Tony Lindgren <tony@atomide.com> wrote:
>> * Uwe Kleine-König <uwe@kleine-koenig.org> [170526 11:09]:
>>> According to the binding documentation and the source code the omap-gpio
>>> controller takes IRQ_TYPE_* as its flags values, not GPIO_ACTIVE_*.
>>>
>>> This patch uses the right variable type which yields the same result
>>> when compiled. Note that this might be wrong and actually
>>> IRQ_TYPE_LEVEL_LOW is intended by the dt author.
>>>
>>> Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
>>> ---
>>> Hello,
>>>
>>> can somebody with the hardware or it's documentation please check which
>>> flag is the right one?
>>
>> I'll wait on this one until we have somebody test it.
>
> I'll look at it this week.

This is what works for me (at least it doesn't produce "irq 88: nobody
cared (try booting with the "irqpoll" option)").

As for tca6416 it is working with all possible settings (from
IRQ_TYPE_EDGE_RISING till IRQ_TYPE_LEVEL_LOW). "cat /proc/interrupts"
always shows Level type:

47:          5  44e07000.gpio  20 Level     1-0020


Yegor

Comments

Tony Lindgren June 12, 2017, 7:32 a.m. UTC | #1
* Yegor Yefremov <yegorslists@googlemail.com> [170606 07:37]:
> On Wed, May 31, 2017 at 7:22 PM, Yegor Yefremov
> <yegorslists@googlemail.com> wrote:
> > Hi Uwe, Tony,
> >
> > On Wed, May 31, 2017 at 7:19 PM, Tony Lindgren <tony@atomide.com> wrote:
> >> * Uwe Kleine-König <uwe@kleine-koenig.org> [170526 11:09]:
> >>> According to the binding documentation and the source code the omap-gpio
> >>> controller takes IRQ_TYPE_* as its flags values, not GPIO_ACTIVE_*.
> >>>
> >>> This patch uses the right variable type which yields the same result
> >>> when compiled. Note that this might be wrong and actually
> >>> IRQ_TYPE_LEVEL_LOW is intended by the dt author.
> >>>
> >>> Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
> >>> ---
> >>> Hello,
> >>>
> >>> can somebody with the hardware or it's documentation please check which
> >>> flag is the right one?
> >>
> >> I'll wait on this one until we have somebody test it.
> >
> > I'll look at it this week.
> 
> This is what works for me (at least it doesn't produce "irq 88: nobody
> cared (try booting with the "irqpoll" option)").
> 
> As for tca6416 it is working with all possible settings (from
> IRQ_TYPE_EDGE_RISING till IRQ_TYPE_LEVEL_LOW). "cat /proc/interrupts"
> always shows Level type:
> 
> 47:          5  44e07000.gpio  20 Level     1-0020

OK, can you please send a proper patch with description
and Signed-off-by? That is unless Uwe cares to update his
patch. Otherwise add Reported-by for Uwe :)

Regards,

Tony
diff mbox

Patch

diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
index 1b215c4..944b095 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -85,7 +85,7 @@ 
                gpio-controller;
                #gpio-cells = <2>;
                interrupt-parent = <&gpio0>;
-               interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+               interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
                pinctrl-names = "default";
                pinctrl-0 = <&tca6416_pins>;
        };
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 832ead8..ae5692b 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -94,7 +94,7 @@ 
                gpio-controller;
                #gpio-cells = <2>;
                interrupt-parent = <&gpio0>;
-               interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+               interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
                pinctrl-names = "default";
                pinctrl-0 = <&tca6416_pins>;
        };
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi
b/arch/arm/boot/dts/am335x-baltos.dtsi
index e3234d4..863942d 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -249,7 +249,7 @@ 
                gpio-controller;
                #gpio-cells = <2>;
                interrupt-parent = <&gpio1>;
-               interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+               interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
                pinctrl-names = "default";
                pinctrl-0 = <&tps65910_pins>;
        };