mbox series

[GIT,PULL] i.MX fixes for 6.1

Message ID 20221101031547.GB125525@dragon
State New
Headers show
Series [GIT,PULL] i.MX fixes for 6.1 | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-6.1

Message

Shawn Guo Nov. 1, 2022, 3:15 a.m. UTC 
The following changes since commit 9abf2313adc1ca1b6180c508c25f22f9395cc780:

  Linux 6.1-rc1 (2022-10-16 15:36:24 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-6.1

for you to fetch changes up to d5c921a53c80dfa942f6dff36253db5a50775a5f:

  arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers (2022-10-29 20:31:24 +0800)

----------------------------------------------------------------
i.MX fixes for 6.1:

- Fix imx93-pd driver to release resources when error occurs in probe.
- A series from Ioana Ciornei to add missing clock frequencies for MDIO
  controllers on LayerScape SoCs, so that the kernel driver can work
  independently from bootloader.
- A series from Li Jun to fix USB power domain setup in i.MX8MM/N device
  trees.
- Fix CPLD_Dn pull configuration for MX8Menlo board to avoid interfering
  with CPLD power off functionality.
- Fix ctrl_sleep_moci GPIO setup for verdin-imx8mp board.
- Fix DT schema check warnings on uSDHC clocks for imx8-ss-conn device
  tree.
- Fix up gpcv2 DT bindings to have an optional `power-domains` property.
- A couple of i.MX93 device tree fixes on S4MU interrupt and gpio-ranges
  of GPIO controllers.
- Keep PU regulator on for Quad and QuadPlus based imx6dl-yapp4 boards to
  work around a hardware design flaw in supply voltage distribution.
- Fix user push-button GPIO offset on imx6qdl-gw59 boards.

----------------------------------------------------------------
Christophe JAILLET (1):
      soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()

Ioana Ciornei (3):
      arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
      arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
      arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers

Li Jun (4):
      arm64: dts: imx8mm: remove otg1/2 power domain dependency on hsio
      arm64: dts: imx8mm: correct usb power domains
      arm64: dts: imx8mn: remove otg1 power domain dependency on hsio
      arm64: dts: imx8mn: Correct the usb power domain

Marek Vasut (1):
      arm64: dts: imx8mm: Enable CPLD_Dn pull down resistor on MX8Menlo

Max Krummenacher (1):
      arm64: dts: verdin-imx8mp: fix ctrl_sleep_moci

Peng Fan (4):
      arm64: dts: imx8: correct clock order
      dt-bindings: power: gpcv2: add power-domains property
      arm64: dts: imx93: correct s4mu interrupt names
      arm64: dts: imx93: correct gpio-ranges

Petr Benes (1):
      ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP

Tim Harvey (1):
      ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset

 .../devicetree/bindings/power/fsl,imx-gpcv2.yaml     |  3 +++
 arch/arm/boot/dts/imx6q-yapp4-crux.dts               |  4 ++++
 arch/arm/boot/dts/imx6qdl-gw5910.dtsi                |  2 +-
 arch/arm/boot/dts/imx6qdl-gw5913.dtsi                |  2 +-
 arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts         |  4 ++++
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi       |  6 ++++++
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi       |  6 ++++++
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi       |  6 ++++++
 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi      | 18 +++++++++---------
 arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts    | 16 ++++++++--------
 arch/arm64/boot/dts/freescale/imx8mm.dtsi            |  8 ++++----
 arch/arm64/boot/dts/freescale/imx8mn.dtsi            |  4 ++--
 arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi     | 20 ++++++++++----------
 arch/arm64/boot/dts/freescale/imx93.dtsi             | 11 ++++++-----
 drivers/soc/imx/imx93-pd.c                           | 17 +++++++++++++++--
 15 files changed, 85 insertions(+), 42 deletions(-)