diff mbox series

[v2,01/11] ARM: imx27: Retrieve the SYSCTRL base address from devicetree

Message ID 20200917004125.18487-2-festevam@gmail.com
State New
Headers show
Series ARM: imx: Further cleanups due to dt-only conversion | expand

Commit Message

Fabio Estevam Sept. 17, 2020, 12:41 a.m. UTC 
Now that imx27 has been converted to a devicetree-only platform,
retrieve the SYSCTRL base address from devicetree.

To keep devicetree compatibilty the SYSCTRL base address will be
retrieved from the CCM base address plus an 0x800 offset.

This is not a problem as the imx27.dtsi describes the CCM register
range as 0x1000.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- Do not introduce a sysctrl node to avoid breaking DT compatibility (Arnd)

 arch/arm/mach-imx/cpu-imx27.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c
index a969aa71b60f..bf70e13bbe9e 100644
--- a/arch/arm/mach-imx/cpu-imx27.c
+++ b/arch/arm/mach-imx/cpu-imx27.c
@@ -9,6 +9,7 @@ 
  */
 
 #include <linux/io.h>
+#include <linux/of_address.h>
 #include <linux/module.h>
 
 #include "hardware.h"
@@ -17,16 +18,23 @@  static int mx27_cpu_rev = -1;
 static int mx27_cpu_partnumber;
 
 #define SYS_CHIP_ID             0x00    /* The offset of CHIP ID register */
+#define SYSCTRL_OFFSET		0x800	/* Offset from CCM base address */
 
 static int mx27_read_cpu_rev(void)
 {
+	void __iomem *ccm_base;
+	struct device_node *np;
 	u32 val;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
+	ccm_base = of_iomap(np, 0);
+	BUG_ON(!ccm_base);
 	/*
 	 * now we have access to the IO registers. As we need
 	 * the silicon revision very early we read it here to
 	 * avoid any further hooks
 	*/
-	val = imx_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + SYS_CHIP_ID));
+	val = imx_readl(ccm_base + SYSCTRL_OFFSET + SYS_CHIP_ID);
 
 	mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF);