@@ -203,6 +203,24 @@ static void __init imx6q_1588_init(void)
else
pr_err("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
+ /*
+ * On imx6 plus, enet_ref from ANATOP/CCM can be internally routed to
+ * be the PTP clock source, instead of having to be routed through
+ * pads.
+ * Board designs which route the ANATOP/CCM clock through pads are
+ * unaffected when routing happens internally. So on these designs,
+ * route internally by default.
+ */
+ if (clksel == IMX6Q_GPR1_ENET_CLK_SEL_ANATOP && cpu_is_imx6q() &&
+ of_machine_is_compatible("fsl,imx6qp")) {
+ if (!IS_ERR(gpr))
+ regmap_update_bits(gpr, IOMUXC_GPR5,
+ IMX6Q_GPR5_ENET_TXCLK_SEL,
+ IMX6Q_GPR5_ENET_TXCLK_SEL);
+ else
+ pr_err("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
+ }
+
clk_put(enet_ref);
put_ptp_clk:
clk_put(ptp_clk);
@@ -240,6 +240,7 @@
#define IMX6Q_GPR4_IPU_RD_CACHE_CTL BIT(0)
#define IMX6Q_GPR5_L2_CLK_STOP BIT(8)
+#define IMX6Q_GPR5_ENET_TXCLK_SEL BIT(9)
#define IMX6Q_GPR5_SATA_SW_PD BIT(10)
#define IMX6Q_GPR5_SATA_SW_RST BIT(11)
On imx6, the ethernet reference clock (clk_enet_ref) can be generated by either the imx6, or an external source (e.g. an oscillator or the PHY). When generated by the imx6, the clock source (from ANATOP) must be routed to the input of clk_enet_ref via two pads on the SoC, typically via a dedicated track on the PCB. On an imx6 plus however, there is a new setting which enables this clock to be routed internally on the SoC, from its ANATOP clock source, straight to clk_enet_ref, without having to go through the SoC pads. Board designs where the clock is generated by the imx6 should not be affected by routing the clock internally. Therefore on a plus, we can enable internal routing by default. Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com> --- v1 -> v2: - Fabio Estevam: use of_machine_is_compatible() to determine if we are running on an imx6 plus. To: Shawn Guo <shawnguo@kernel.org> To: Andy Duan <fugang.duan@nxp.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org arch/arm/mach-imx/mach-imx6q.c | 18 ++++++++++++++++++ include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 1 + 2 files changed, 19 insertions(+)