diff mbox series

[v3,6/6] arm64: dts: allwinner: h6: pine64: Add PIO regulators

Message ID 20190408092619.23152-7-peron.clem@gmail.com
State New
Headers show
Series Add Beelink GS1 Board | expand

Commit Message

Clément Péron April 8, 2019, 9:26 a.m. UTC 
Add PIO regulators for Pine64 board.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 .../boot/dts/allwinner/sun50i-h6-pine-h64.dts   | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 4802902e128f..6f2d9adf4f10 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -127,6 +127,12 @@ 
 	status = "okay";
 };
 
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_bldo2>;
+};
+
 &r_i2c {
 	status = "okay";
 
@@ -247,6 +253,17 @@ 
 	};
 };
 
+&r_pio {
+	/*
+	 * PL0 and PL1 are used for PMIC I2C
+	 * don't enable the pl-supply else
+	 * it will fail at boot
+	 *
+	 * vcc-pl-supply = <&reg_aldo1>;
+	 */
+	vcc-pm-supply = <&reg_bldo2>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ph_pins>;