| Message ID | 20190212112126.572-4-shawnguo@kernel.org |
|---|---|
| State | New |
| Headers | show |
| Series | [GIT,PULL,1/7] i.MX drivers update for 5.1 | expand |
On Tue, Feb 12, 2019 at 12:22 PM Shawn Guo <shawnguo@kernel.org> wrote: > i.MX device tree changes for 5.1: > - New board support: Logic PD i.MX6QD EVM, ZII SSMB DTU, Phytec > phyBOARD i.MX6UL Segin, Y Soft IOTA Draco, Hydra and Ursa boards. > - Add regulator control for various sensors on imx6qdl-sabresd board. > - Add DISPLAY power domain support for i.MX6SX SoC. > - Add stmpe-adc device node for Toradex iMX6 module. > - Switch to SPDX identifier for imx6q-tbs2910 board. > - Add proper ksz9031 clock skew values for imx6qdl-phytec-pfla02 board. > - Mark I2C recovery GPIOs as open drain and correct and WEIM range > configuration for apalis/colibri boards. > - Small and random updates to various devices. Pulled into arm/dt, thanks! Arnd
The following changes since commit bfeffd155283772bbe78c6a05dec7c0128ee500c: Linux 5.0-rc1 (2019-01-06 17:08:20 -0800) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt-5.1 for you to fetch changes up to 1c207f911fe9c8e78efc5a4803a0aa8a18102a23: ARM: dts: imx: Add support for Logic PD i.MX6QD EVM (2019-02-12 17:17:11 +0800) ---------------------------------------------------------------- i.MX device tree changes for 5.1: - New board support: Logic PD i.MX6QD EVM, ZII SSMB DTU, Phytec phyBOARD i.MX6UL Segin, Y Soft IOTA Draco, Hydra and Ursa boards. - Add regulator control for various sensors on imx6qdl-sabresd board. - Add DISPLAY power domain support for i.MX6SX SoC. - Add stmpe-adc device node for Toradex iMX6 module. - Switch to SPDX identifier for imx6q-tbs2910 board. - Add proper ksz9031 clock skew values for imx6qdl-phytec-pfla02 board. - Mark I2C recovery GPIOs as open drain and correct and WEIM range configuration for apalis/colibri boards. - Small and random updates to various devices. ---------------------------------------------------------------- Adam Ford (1): ARM: dts: imx: Add support for Logic PD i.MX6QD EVM Alexander Shiyan (4): ARM: dts: imx: Change i.MX27 interrupt controller unit name ARM: dts: i.MX51: digi-connectcore: Move RTC from SOM to JSK ARM: dts: i.MX51: imx51-digi-connectcore: Enable ESDHC1 ARM: dts: i.MX51: digi-connectcore-som: Add support for I2C bus recovery Andrew Lunn (1): ARM: dts: vf610: Add ZII SSMB DTU board Anson Huang (7): ARM: dts: imx7ulp: add HSRUN mode clocks ARM: dts: imx6sl: correct PWM ipg clock source ARM: dts: imx7ulp: add sim node ARM: dts: imx6qdl-sabresd: add regulator control for isl29023 sensor ARM: dts: imx6qdl-sabresd: add regulators control for mag3110 sensor ARM: dts: imx6qdl-sabresd: add regulators control for mma8451 sensor ARM: dts: imx6qdl-sabresd: remove reg_sensors' regulator-always-on BOUGH CHEN (1): ARM: dts: imx6ull: change to use new compatible "fsl,imx6ull-usdhc" for usdhc Fabio Estevam (2): ARM: dts: vf610-zii-cfu1: Run I2C0 at 400 kHz ARM: dts: vf610-zii-ssmb-spu3: Pass "no-sdio"/"no-sd" properties Hou Zhiqiang (1): ARM: dts: ls1021a: add num-viewport property for PCIe DT nodes Leonard Crestez (1): ARM: dts: imx6sx: Add DISPLAY power domain support Lukasz Majewski (1): ARM: dts: vf610-bk4: Provide support for reading ID code from MVB device Manivannan Sadhasivam (1): ARM: dts: Add devicetree compatibles for LS1021A based boards Marco Felsch (1): ARM: dts: imx6qdl-phytec-pfla02: add missing interrupt-controller property Martyn Welch (1): ARM: dts: imx6: Add support for Phytec phyBOARD i.MX6UL Segin Patrick Havelange (1): ARM: dts: ls1021a: Add memory controller Philipp Zabel (1): ARM: dts: pfla02: add ksz9031 clock skew values Philippe Schenker (1): ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modules Ran Wang (1): ARM: dts: ls1021a: Add incr-burst-byte-adjustment property to USB3 node Soeren Moch (1): ARM: dts: imx6q-tbs2910: Switch to SPDX identifier Stefan Agner (2): ARM: dts: imx6*-apalis/-colibri: mark I2C recovery GPIOs as open drain ARM: dts: colibri: use valid range configuration for weim Stefan Wahren (1): ARM: dts: imx6ull: Fix i.MX6ULL/ULZ ocotp compatible Vokáč Michal (1): ARM: dts: imx: Add Y Soft IOTA Draco, Hydra and Ursa boards arch/arm/boot/dts/Makefile | 5 + arch/arm/boot/dts/imx27.dtsi | 2 +- arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts | 16 + arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi | 34 +- arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi | 555 +++++++++++++++++++ arch/arm/boot/dts/imx6-logicpd-som.dtsi | 365 +++++++++++++ arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 5 +- arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 595 +++++++++++++++++++++ arch/arm/boot/dts/imx6dl-yapp4-draco.dts | 58 ++ arch/arm/boot/dts/imx6dl-yapp4-hydra.dts | 50 ++ arch/arm/boot/dts/imx6dl-yapp4-ursa.dts | 54 ++ arch/arm/boot/dts/imx6q-logicpd.dts | 120 +++++ arch/arm/boot/dts/imx6q-tbs2910.dts | 49 +- arch/arm/boot/dts/imx6qdl-apalis.dtsi | 26 +- arch/arm/boot/dts/imx6qdl-colibri.dtsi | 26 +- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 14 + arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 6 +- arch/arm/boot/dts/imx6sl.dtsi | 8 +- arch/arm/boot/dts/imx6sx.dtsi | 19 +- arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi | 148 +++++ arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi | 55 ++ .../boot/dts/imx6ul-phytec-phyboard-segin-full.dts | 89 +++ .../arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi | 329 ++++++++++++ arch/arm/boot/dts/imx6ull-colibri.dtsi | 8 +- arch/arm/boot/dts/imx6ull.dtsi | 12 + arch/arm/boot/dts/imx7ulp.dtsi | 19 +- arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts | 1 + arch/arm/boot/dts/ls1021a-qds.dts | 1 + arch/arm/boot/dts/ls1021a-twr.dts | 1 + arch/arm/boot/dts/ls1021a.dtsi | 10 + arch/arm/boot/dts/vf610-bk4.dts | 31 ++ arch/arm/boot/dts/vf610-zii-cfu1.dts | 2 +- arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts | 311 +++++++++++ arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts | 3 + 34 files changed, 2938 insertions(+), 89 deletions(-) create mode 100644 arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi create mode 100644 arch/arm/boot/dts/imx6-logicpd-som.dtsi create mode 100644 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi create mode 100644 arch/arm/boot/dts/imx6dl-yapp4-draco.dts create mode 100644 arch/arm/boot/dts/imx6dl-yapp4-hydra.dts create mode 100644 arch/arm/boot/dts/imx6dl-yapp4-ursa.dts create mode 100644 arch/arm/boot/dts/imx6q-logicpd.dts create mode 100644 arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi create mode 100644 arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi create mode 100644 arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts create mode 100644 arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi create mode 100644 arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts