diff mbox series

[2/6] phy: add A3700 COMPHY support

Message ID 20181122210420.14861-3-miquel.raynal@bootlin.com
State New
Headers show
Series Add Armada 3700 COMPHY support | expand

Commit Message

Miquel Raynal Nov. 22, 2018, 9:04 p.m. UTC
Add a driver to support COMPHY, a hardware block providing shared
serdes PHYs on Marvell Armada 3700. This driver uses SMC calls and
rely on having an up-to-date firmware.

SATA, PCie and USB3 host mode have been tested successfully with an
ESPRESSObin. SGMII mode cannot be tested with this platform.

Co-Developed-by: Evan Wang <xswang@marvell.com>
Signed-off-by: Evan Wang <xswang@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/phy/marvell/Kconfig                  |  10 +
 drivers/phy/marvell/Makefile                 |   1 +
 drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 276 +++++++++++++++++++
 3 files changed, 287 insertions(+)
 create mode 100644 drivers/phy/marvell/phy-mvebu-a3700-comphy.c

Comments

Miquel Raynal Nov. 23, 2018, 8:30 a.m. UTC | #1
Hello,

+ Adding people concerned by this driver that I forgot when initially
  sending the driver, will update the Cc: list if there is a v2.

One question below.

Miquel Raynal <miquel.raynal@bootlin.com> wrote on Thu, 22 Nov 2018
22:04:16 +0100:

> Add a driver to support COMPHY, a hardware block providing shared
> serdes PHYs on Marvell Armada 3700. This driver uses SMC calls and
> rely on having an up-to-date firmware.
> 
> SATA, PCie and USB3 host mode have been tested successfully with an
> ESPRESSObin. SGMII mode cannot be tested with this platform.
> 
> Co-Developed-by: Evan Wang <xswang@marvell.com>
> Signed-off-by: Evan Wang <xswang@marvell.com>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
>  drivers/phy/marvell/Kconfig                  |  10 +
>  drivers/phy/marvell/Makefile                 |   1 +
>  drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 276 +++++++++++++++++++
>  3 files changed, 287 insertions(+)
>  create mode 100644 drivers/phy/marvell/phy-mvebu-a3700-comphy.c

[...]

> +
> +static int mvebu_a3700_comphy_power_on(struct phy *phy)
> +{
> +	struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
> +	u32 fw_param;
> +	int fw_mode;
> +
> +	fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port,
> +						 lane->mode);
> +	if (fw_mode < 0) {
> +		dev_err(lane->dev, "invalid COMPHY mode\n");
> +		return fw_mode;
> +	}
> +
> +	switch (lane->mode) {
> +	case PHY_MODE_USB_HOST_SS:
> +		dev_dbg(lane->dev, "set lane %d to USB3 host mode\n", lane->id);
> +		fw_param = COMPHY_FW_MODE(fw_mode);
> +		break;
> +	case PHY_MODE_SATA:
> +		dev_dbg(lane->dev, "set lane %d to SATA mode\n", lane->id);
> +		fw_param = COMPHY_FW_MODE(fw_mode);
> +		break;
> +	case PHY_MODE_SGMII:
> +		dev_dbg(lane->dev, "set lane %d to SGMII mode\n", lane->id);
> +		fw_param = COMPHY_FW_NET(fw_mode, lane->port,
> +					 COMPHY_FW_SPEED_1_25G);
> +		break;
> +	case PHY_MODE_PCIE:
> +		dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id);
> +		fw_param = COMPHY_FW_PCIE(fw_mode, lane->port,
> +					  COMPHY_FW_SPEED_5G,
> +					  phy->attrs.bus_width);
> +		break;
> +	default:
> +		dev_err(lane->dev, "unsupported PHY mode (%d)\n", lane->mode);
> +		return -ENOTSUPP;
> +	}
> +
> +	return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param);

This call might fail because the firmware is not up-to-date. In this
case, I wonder what is the appropriate behavior. Here I just return the
error; this means drivers may fail to probe when enabling their PHY.

Shall I ignore a "not supported by the firmware" code and return 0 to
the caller (with a printed warning) so it will continue probing? Doing
so is lying as the PHY might not be configured as expected and S2RAM
will always fail in this case. 

Thanks,
Miquèl
Miquel Raynal Nov. 29, 2018, 4:12 p.m. UTC | #2
Hello,

Miquel Raynal <miquel.raynal@bootlin.com> wrote on Thu, 22 Nov 2018
22:04:16 +0100:

> Add a driver to support COMPHY, a hardware block providing shared
> serdes PHYs on Marvell Armada 3700. This driver uses SMC calls and
> rely on having an up-to-date firmware.
> 
> SATA, PCie and USB3 host mode have been tested successfully with an
> ESPRESSObin. SGMII mode cannot be tested with this platform.
> 
> Co-Developed-by: Evan Wang <xswang@marvell.com>
> Signed-off-by: Evan Wang <xswang@marvell.com>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---

[...]

> +static struct phy *mvebu_a3700_comphy_xlate(struct device *dev,
> +					    struct of_phandle_args *args)
> +{
> +	struct mvebu_a3700_comphy_lane *lane;
> +	struct phy *phy;
> +
> +	if (WARN_ON(args->args[0] >= MVEBU_A3700_COMPHY_PORTS))
> +		return ERR_PTR(-EINVAL);
> +
> +	phy = of_phy_simple_xlate(dev, args);
> +	if (IS_ERR(phy))
> +		return phy;
> +
> +	lane = phy_get_drvdata(phy);
> +	if (lane->port >= 0)
> +		return ERR_PTR(-EBUSY);

This is not valid. It works only the first time the consumer gets
a PHY for this lane. If the consumer put the PHY (module is unloaded)
and then gets the PHY again (module is re-loaded a second time), the
port is already set to != -1 and this will exit with an error and
prevent the module to probe.

> +
> +	lane->port = args->args[0];

I will remove the above check and transform it into a valid "port"
value right here.

Note: the same applies to the cp110 comphy driver on which the driver
structure is based.

> +
> +	return phy;
> +}
> +
> +static int mvebu_a3700_comphy_probe(struct platform_device *pdev)
> +{
> +	struct phy_provider *provider;
> +	struct device_node *child;
> +
> +	for_each_available_child_of_node(pdev->dev.of_node, child) {
> +		struct mvebu_a3700_comphy_lane *lane;
> +		struct phy *phy;
> +		int ret;
> +		u32 lane_id;
> +
> +		ret = of_property_read_u32(child, "reg", &lane_id);
> +		if (ret < 0) {
> +			dev_err(&pdev->dev, "missing 'reg' property (%d)\n",
> +				ret);
> +			continue;
> +		}
> +
> +		if (lane_id >= MVEBU_A3700_COMPHY_LANES) {
> +			dev_err(&pdev->dev, "invalid 'reg' property\n");
> +			continue;
> +		}
> +
> +		lane = devm_kzalloc(&pdev->dev, sizeof(*lane), GFP_KERNEL);
> +		if (!lane)
> +			return -ENOMEM;
> +
> +		phy = devm_phy_create(&pdev->dev, child,
> +				      &mvebu_a3700_comphy_ops);
> +		if (IS_ERR(phy))
> +			return PTR_ERR(phy);
> +
> +		lane->dev = &pdev->dev;
> +		lane->mode = PHY_MODE_INVALID;
> +		lane->id = lane_id;
> +		lane->port = -1;
> +		phy_set_drvdata(phy, lane);
> +	}
> +
> +	provider = devm_of_phy_provider_register(&pdev->dev,
> +						 mvebu_a3700_comphy_xlate);
> +	return PTR_ERR_OR_ZERO(provider);
> +}
> +
> +static const struct of_device_id mvebu_a3700_comphy_of_match_table[] = {
> +	{ .compatible = "marvell,comphy-a3700" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, mvebu_a3700_comphy_of_match_table);
> +
> +static struct platform_driver mvebu_a3700_comphy_driver = {
> +	.probe	= mvebu_a3700_comphy_probe,
> +	.driver	= {
> +		.name = "mvebu-a3700-comphy",
> +		.of_match_table = mvebu_a3700_comphy_of_match_table,
> +	},
> +};
> +module_platform_driver(mvebu_a3700_comphy_driver);
> +
> +MODULE_AUTHOR("Miquèl Raynal <miquel.raynal@bootlin.com>");
> +MODULE_DESCRIPTION("Common PHY driver for A3700");
> +MODULE_LICENSE("GPL v2");


Thanks,
Miquèl
Russell King (Oracle) Nov. 29, 2018, 4:16 p.m. UTC | #3
On Thu, Nov 29, 2018 at 05:12:45PM +0100, Miquel Raynal wrote:
> Hello,
> 
> Miquel Raynal <miquel.raynal@bootlin.com> wrote on Thu, 22 Nov 2018
> 22:04:16 +0100:
> > +static struct phy *mvebu_a3700_comphy_xlate(struct device *dev,
> > +					    struct of_phandle_args *args)
> > +{
> > +	struct mvebu_a3700_comphy_lane *lane;
> > +	struct phy *phy;
> > +
> > +	if (WARN_ON(args->args[0] >= MVEBU_A3700_COMPHY_PORTS))
> > +		return ERR_PTR(-EINVAL);
> > +
> > +	phy = of_phy_simple_xlate(dev, args);
> > +	if (IS_ERR(phy))
> > +		return phy;
> > +
> > +	lane = phy_get_drvdata(phy);
> > +	if (lane->port >= 0)
> > +		return ERR_PTR(-EBUSY);
> 
> This is not valid. It works only the first time the consumer gets
> a PHY for this lane. If the consumer put the PHY (module is unloaded)
> and then gets the PHY again (module is re-loaded a second time), the
> port is already set to != -1 and this will exit with an error and
> prevent the module to probe.
> 
> > +
> > +	lane->port = args->args[0];
> 
> I will remove the above check and transform it into a valid "port"
> value right here.

Please note that mvebu_comphy_xlate() in
drivers/phy/marvell/phy-mvebu-cp110-comphy.c does exactly the same.
diff mbox series

Patch

diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
index 6fb4b56e4c14..f0c39439f06e 100644
--- a/drivers/phy/marvell/Kconfig
+++ b/drivers/phy/marvell/Kconfig
@@ -21,6 +21,16 @@  config PHY_BERLIN_USB
 	help
 	  Enable this to support the USB PHY on Marvell Berlin SoCs.
 
+config PHY_MVEBU_A3700_COMPHY
+	tristate "Marvell A3700 comphy driver"
+	depends on ARCH_MVEBU || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  This driver allows to control the comphy, a hardware block providing
+	  shared serdes PHYs on Marvell Armada 3700. Its serdes lanes can be
+	  used by various controllers: Ethernet, SATA, USB3, PCIe.
+
 config PHY_MVEBU_CP110_COMPHY
 	tristate "Marvell CP110 comphy driver"
 	depends on ARCH_MVEBU || COMPILE_TEST
diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
index 3975b144f8ec..c13a0c8ab6f0 100644
--- a/drivers/phy/marvell/Makefile
+++ b/drivers/phy/marvell/Makefile
@@ -2,6 +2,7 @@ 
 obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY)	+= phy-armada375-usb2.o
 obj-$(CONFIG_PHY_BERLIN_SATA)		+= phy-berlin-sata.o
 obj-$(CONFIG_PHY_BERLIN_USB)		+= phy-berlin-usb.o
+obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY)	+= phy-mvebu-a3700-comphy.o
 obj-$(CONFIG_PHY_MVEBU_CP110_COMPHY)	+= phy-mvebu-cp110-comphy.o
 obj-$(CONFIG_PHY_MVEBU_SATA)		+= phy-mvebu-sata.o
 obj-$(CONFIG_PHY_PXA_28NM_HSIC)		+= phy-pxa-28nm-hsic.o
diff --git a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
new file mode 100644
index 000000000000..cc815cf55a0c
--- /dev/null
+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
@@ -0,0 +1,276 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell
+ *
+ * Authors:
+ *   Evan Wang <xswang@marvell.com>
+ *   Miquèl Raynal <miquel.raynal@bootlin.com>
+ *
+ * Inspired from phy-mvebu-cp110-comphy.c written by Antoine Tenart.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define MVEBU_A3700_COMPHY_LANES		3
+#define MVEBU_A3700_COMPHY_PORTS		2
+
+/* COMPHY Fast SMC function identifiers */
+#define COMPHY_SIP_POWER_ON			0x82000001
+#define COMPHY_SIP_POWER_OFF			0x82000002
+#define COMPHY_SIP_PLL_LOCK			0x82000003
+
+#define COMPHY_FW_MODE_SATA			0x1
+#define COMPHY_FW_MODE_SGMII			0x2
+#define COMPHY_FW_MODE_HS_SGMII			0x3
+#define COMPHY_FW_MODE_USB3H			0x4
+#define COMPHY_FW_MODE_USB3D			0x5
+#define COMPHY_FW_MODE_PCIE			0x6
+#define COMPHY_FW_MODE_RXAUI			0x7
+#define COMPHY_FW_MODE_XFI			0x8
+#define COMPHY_FW_MODE_SFI			0x9
+#define COMPHY_FW_MODE_USB3			0xa
+
+#define COMPHY_FW_SPEED_1_25G			0 /* SGMII 1G */
+#define COMPHY_FW_SPEED_2_5G			1
+#define COMPHY_FW_SPEED_3_125G			2 /* SGMII 2.5G */
+#define COMPHY_FW_SPEED_5G			3
+#define COMPHY_FW_SPEED_5_15625G		4 /* XFI 5G */
+#define COMPHY_FW_SPEED_6G			5
+#define COMPHY_FW_SPEED_10_3125G		6 /* XFI 10G */
+#define COMPHY_FW_SPEED_MAX			0x3F
+
+#define COMPHY_FW_MODE(mode)			((mode) << 12)
+#define COMPHY_FW_NET(mode, idx, speed)		(COMPHY_FW_MODE(mode) | \
+						 ((idx) << 8) |	\
+						 ((speed) << 2))
+#define COMPHY_FW_PCIE(mode, idx, speed, width)	(COMPHY_FW_NET(mode, idx, speed) | \
+						 ((width) << 18))
+
+struct mvebu_a3700_comphy_conf {
+	unsigned int lane;
+	enum phy_mode mode;
+	unsigned int port;
+	u32 fw_mode;
+};
+
+#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _port, _fw_mode)	\
+	{							\
+		.lane = _lane,					\
+		.mode = _mode,					\
+		.port = _port,					\
+		.fw_mode = _fw_mode,				\
+	}
+
+static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = {
+	/* lane 0 */
+	MVEBU_A3700_COMPHY_CONF(0, PHY_MODE_USB_HOST_SS, 0, COMPHY_FW_MODE_USB3H),
+	MVEBU_A3700_COMPHY_CONF(0, PHY_MODE_SGMII, 1, COMPHY_FW_MODE_SGMII),
+	/* lane 1 */
+	MVEBU_A3700_COMPHY_CONF(1, PHY_MODE_PCIE, 0, COMPHY_FW_MODE_PCIE),
+	MVEBU_A3700_COMPHY_CONF(1, PHY_MODE_SGMII, 0, COMPHY_FW_MODE_SGMII),
+	/* lane 2 */
+	MVEBU_A3700_COMPHY_CONF(2, PHY_MODE_SATA, 0, COMPHY_FW_MODE_SATA),
+	MVEBU_A3700_COMPHY_CONF(2, PHY_MODE_USB_HOST_SS, 0, COMPHY_FW_MODE_USB3H),
+};
+
+struct mvebu_a3700_comphy_lane {
+	struct device *dev;
+	unsigned int id;
+	enum phy_mode mode;
+	int port;
+};
+
+static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane,
+				  unsigned long mode)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(function, lane, mode, 0, 0, 0, 0, 0, &res);
+
+	return res.a0;
+}
+
+static int mvebu_a3700_comphy_get_fw_mode(int lane, int port,
+					  enum phy_mode mode)
+{
+	int i, n = ARRAY_SIZE(mvebu_a3700_comphy_modes);
+
+	/* Unused PHY mux value is 0x0 */
+	if (mode == PHY_MODE_INVALID)
+		return -EINVAL;
+
+	for (i = 0; i < n; i++) {
+		if (mvebu_a3700_comphy_modes[i].lane == lane &&
+		    mvebu_a3700_comphy_modes[i].port == port &&
+		    mvebu_a3700_comphy_modes[i].mode == mode)
+			break;
+	}
+
+	if (i == n)
+		return -EINVAL;
+
+	return mvebu_a3700_comphy_modes[i].fw_mode;
+}
+
+static int mvebu_a3700_comphy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+	struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
+	int fw_mode;
+
+	fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port, mode);
+	if (fw_mode < 0) {
+		dev_err(lane->dev, "invalid COMPHY mode\n");
+		return fw_mode;
+	}
+
+	/* Just remember the mode, ->power_on() will do the real setup */
+	lane->mode = mode;
+
+	return 0;
+}
+
+static int mvebu_a3700_comphy_power_on(struct phy *phy)
+{
+	struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
+	u32 fw_param;
+	int fw_mode;
+
+	fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port,
+						 lane->mode);
+	if (fw_mode < 0) {
+		dev_err(lane->dev, "invalid COMPHY mode\n");
+		return fw_mode;
+	}
+
+	switch (lane->mode) {
+	case PHY_MODE_USB_HOST_SS:
+		dev_dbg(lane->dev, "set lane %d to USB3 host mode\n", lane->id);
+		fw_param = COMPHY_FW_MODE(fw_mode);
+		break;
+	case PHY_MODE_SATA:
+		dev_dbg(lane->dev, "set lane %d to SATA mode\n", lane->id);
+		fw_param = COMPHY_FW_MODE(fw_mode);
+		break;
+	case PHY_MODE_SGMII:
+		dev_dbg(lane->dev, "set lane %d to SGMII mode\n", lane->id);
+		fw_param = COMPHY_FW_NET(fw_mode, lane->port,
+					 COMPHY_FW_SPEED_1_25G);
+		break;
+	case PHY_MODE_PCIE:
+		dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id);
+		fw_param = COMPHY_FW_PCIE(fw_mode, lane->port,
+					  COMPHY_FW_SPEED_5G,
+					  phy->attrs.bus_width);
+		break;
+	default:
+		dev_err(lane->dev, "unsupported PHY mode (%d)\n", lane->mode);
+		return -ENOTSUPP;
+	}
+
+	return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param);
+}
+
+static int mvebu_a3700_comphy_power_off(struct phy *phy)
+{
+	struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
+
+	return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_OFF, lane->id, 0);
+}
+
+static const struct phy_ops mvebu_a3700_comphy_ops = {
+	.power_on	= mvebu_a3700_comphy_power_on,
+	.power_off	= mvebu_a3700_comphy_power_off,
+	.set_mode	= mvebu_a3700_comphy_set_mode,
+	.owner		= THIS_MODULE,
+};
+
+static struct phy *mvebu_a3700_comphy_xlate(struct device *dev,
+					    struct of_phandle_args *args)
+{
+	struct mvebu_a3700_comphy_lane *lane;
+	struct phy *phy;
+
+	if (WARN_ON(args->args[0] >= MVEBU_A3700_COMPHY_PORTS))
+		return ERR_PTR(-EINVAL);
+
+	phy = of_phy_simple_xlate(dev, args);
+	if (IS_ERR(phy))
+		return phy;
+
+	lane = phy_get_drvdata(phy);
+	if (lane->port >= 0)
+		return ERR_PTR(-EBUSY);
+
+	lane->port = args->args[0];
+
+	return phy;
+}
+
+static int mvebu_a3700_comphy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *provider;
+	struct device_node *child;
+
+	for_each_available_child_of_node(pdev->dev.of_node, child) {
+		struct mvebu_a3700_comphy_lane *lane;
+		struct phy *phy;
+		int ret;
+		u32 lane_id;
+
+		ret = of_property_read_u32(child, "reg", &lane_id);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "missing 'reg' property (%d)\n",
+				ret);
+			continue;
+		}
+
+		if (lane_id >= MVEBU_A3700_COMPHY_LANES) {
+			dev_err(&pdev->dev, "invalid 'reg' property\n");
+			continue;
+		}
+
+		lane = devm_kzalloc(&pdev->dev, sizeof(*lane), GFP_KERNEL);
+		if (!lane)
+			return -ENOMEM;
+
+		phy = devm_phy_create(&pdev->dev, child,
+				      &mvebu_a3700_comphy_ops);
+		if (IS_ERR(phy))
+			return PTR_ERR(phy);
+
+		lane->dev = &pdev->dev;
+		lane->mode = PHY_MODE_INVALID;
+		lane->id = lane_id;
+		lane->port = -1;
+		phy_set_drvdata(phy, lane);
+	}
+
+	provider = devm_of_phy_provider_register(&pdev->dev,
+						 mvebu_a3700_comphy_xlate);
+	return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id mvebu_a3700_comphy_of_match_table[] = {
+	{ .compatible = "marvell,comphy-a3700" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mvebu_a3700_comphy_of_match_table);
+
+static struct platform_driver mvebu_a3700_comphy_driver = {
+	.probe	= mvebu_a3700_comphy_probe,
+	.driver	= {
+		.name = "mvebu-a3700-comphy",
+		.of_match_table = mvebu_a3700_comphy_of_match_table,
+	},
+};
+module_platform_driver(mvebu_a3700_comphy_driver);
+
+MODULE_AUTHOR("Miquèl Raynal <miquel.raynal@bootlin.com>");
+MODULE_DESCRIPTION("Common PHY driver for A3700");
+MODULE_LICENSE("GPL v2");