| Message ID | 20180629145221.10393-1-sebastien.szymanski@armadeus.com |
|---|---|
| State | New |
| Headers | show |
| Series | [1/1] ARM: dts: imx6ull: add operating points | expand |
On 29-06-18, 16:52, Sébastien Szymanski wrote: > i.MX6ULL has different operating ranges than i.MX6UL so add the > operating points for the i.MX6ULL and removed them form board device s/removed/remove/ s/form/from/ > trees. A 25mV offset is added to the minimum allowed values like for the > i.MX6UL. > The valid frequencies are now selected by the cpufreq driver according > to ratings stored in fuses since commit 0aa9abd4c212 ("cpufreq: imx6q: > check speed grades for i.MX6ULL") > > Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> > --- > arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 14 -------------- > arch/arm/boot/dts/imx6ull.dtsi | 19 +++++++++++++++++++ > 2 files changed, 19 insertions(+), 14 deletions(-) > > diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi > index 3dffbcd50bf6..183193e8580d 100644 > --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi > +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi > @@ -20,20 +20,6 @@ > > &cpu0 { > clock-frequency = <792000000>; > - operating-points = < > - /* kHz uV */ > - 792000 1225000 > - 528000 1175000 > - 396000 1025000 > - 198000 950000 > - >; > - fsl,soc-operating-points = < > - /* KHz uV */ > - 792000 1175000 > - 528000 1175000 > - 396000 1175000 > - 198000 1175000 > - >; > }; > > &iomuxc { > diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi > index ebc25c98e5e1..ade64bd46fab 100644 > --- a/arch/arm/boot/dts/imx6ull.dtsi > +++ b/arch/arm/boot/dts/imx6ull.dtsi > @@ -48,6 +48,25 @@ > /* Delete CAAM node in AIPS-2 (i.MX6UL specific) */ > /delete-node/ &crypto; > > +&cpu0 { > + operating-points = < > + /* kHz uV */ > + 900000 1275000 > + 792000 1225000 > + 528000 1175000 > + 396000 1025000 > + 198000 950000 > + >; > + fsl,soc-operating-points = < > + /* KHz uV */ > + 900000 1175000 > + 792000 1175000 > + 528000 1175000 > + 396000 1175000 > + 198000 1175000 > + >; > +}; > + > / { > soc { > aips3: aips-bus@2200000 { Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
On Mon, Jul 02, 2018 at 10:22:05AM +0530, Viresh Kumar wrote: > On 29-06-18, 16:52, Sébastien Szymanski wrote: > > i.MX6ULL has different operating ranges than i.MX6UL so add the > > operating points for the i.MX6ULL and removed them form board device > > s/removed/remove/ > s/form/from/ I fixed them up and applied the patch. Shawn > > > trees. A 25mV offset is added to the minimum allowed values like for the > > i.MX6UL. > > The valid frequencies are now selected by the cpufreq driver according > > to ratings stored in fuses since commit 0aa9abd4c212 ("cpufreq: imx6q: > > check speed grades for i.MX6ULL") > > > > Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi index 3dffbcd50bf6..183193e8580d 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi @@ -20,20 +20,6 @@ &cpu0 { clock-frequency = <792000000>; - operating-points = < - /* kHz uV */ - 792000 1225000 - 528000 1175000 - 396000 1025000 - 198000 950000 - >; - fsl,soc-operating-points = < - /* KHz uV */ - 792000 1175000 - 528000 1175000 - 396000 1175000 - 198000 1175000 - >; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index ebc25c98e5e1..ade64bd46fab 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -48,6 +48,25 @@ /* Delete CAAM node in AIPS-2 (i.MX6UL specific) */ /delete-node/ &crypto; +&cpu0 { + operating-points = < + /* kHz uV */ + 900000 1275000 + 792000 1225000 + 528000 1175000 + 396000 1025000 + 198000 950000 + >; + fsl,soc-operating-points = < + /* KHz uV */ + 900000 1175000 + 792000 1175000 + 528000 1175000 + 396000 1175000 + 198000 1175000 + >; +}; + / { soc { aips3: aips-bus@2200000 {
i.MX6ULL has different operating ranges than i.MX6UL so add the operating points for the i.MX6ULL and removed them form board device trees. A 25mV offset is added to the minimum allowed values like for the i.MX6UL. The valid frequencies are now selected by the cpufreq driver according to ratings stored in fuses since commit 0aa9abd4c212 ("cpufreq: imx6q: check speed grades for i.MX6ULL") Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> --- arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi | 14 -------------- arch/arm/boot/dts/imx6ull.dtsi | 19 +++++++++++++++++++ 2 files changed, 19 insertions(+), 14 deletions(-)