diff mbox

[3/3] ARM: BCM5301X: Specify USB 3.0 PHY in DT

Message ID 20160921205838.15627-3-zajec5@gmail.com
State New
Headers show

Commit Message

Rafał Miłecki Sept. 21, 2016, 8:58 p.m. UTC 
From: Rafał Miłecki <rafal@milecki.pl>

Driver for Northstar USB 3.0 PHY has been recently added under the name
phy-bcm-ns-usb3. Add binding for it into the DT files.
The only slightly tricky part is BCM47094 which uses different PHY
version and requires different compatible value.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 arch/arm/boot/dts/bcm47094.dtsi | 6 ++++++
 arch/arm/boot/dts/bcm5301x.dtsi | 7 +++++++
 2 files changed, 13 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
index f039765..4f09aa0 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -6,6 +6,12 @@ 
 
 #include "bcm4708.dtsi"
 
+/ {
+	usb3_phy: usb3-phy {
+		compatible = "brcm,ns-bx-usb3-phy";
+	};
+};
+
 &uart0 {
 	clock-frequency = <125000000>;
 };
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index ae4b388..f09a2bb 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -149,6 +149,13 @@ 
 		clock-names = "phy-ref-clk";
 	};
 
+	usb3_phy: usb3-phy {
+		compatible = "brcm,ns-ax-usb3-phy";
+		reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
+		reg-names = "dmp", "ccb-mii";
+		#phy-cells = <0>;
+	};
+
 	axi@18000000 {
 		compatible = "brcm,bus-axi";
 		reg = <0x18000000 0x1000>;