mbox

[GIT,PULL] Allwinner clocks additions for 3.17

Message ID 20140718211335.GA29677@lukather
State New
Headers show

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git tags/sunxi-clocks-for-3.17

Message

Maxime Ripard July 18, 2014, 9:13 p.m. UTC
Hi Mike,

Here is the first pull request for the Allwinner clocks changes 

Unless something major comes up, or we agree quickly on the MMC
changes I posted yesterday, there shouldn't be any follow up for the
3.17 relaese cycle.

Thanks!
Maxime

The following changes since commit 7171511eaec5bf23fb06078f59784a3a0626b38f:

  Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git tags/sunxi-clocks-for-3.17

for you to fetch changes up to 6c1d66f0da59362cb33ce37d436cd28c77c2b2cb:

  clk: sunxi: sun6i-a31-apb0-gates: Add A23 APB0 support (2014-07-15 08:53:24 +0200)

----------------------------------------------------------------
Allwinner clocks additions for 3.17

This pull request adds support for the clocks found in the newly supported
Allwinner A23 clocks.

----------------------------------------------------------------
Chen-Yu Tsai (9):
      clk: sunxi: register clock gates with clkdev
      clk: sunxi: move "ahb_sdram" to protected clock list
      clk: sunxi: Support factor clocks with N factor starting not from 0
      clk: sunxi: Add support for table-based divider clocks
      clk: sunxi: Add A23 clocks support
      clk: sunxi: Add A23 APB0 divider clock support
      clk: sunxi: Fix gate indexing for sun6i-a31-apb0-gates
      clk: sunxi: sun6i-apb0-gates: use bitmaps for valid gate indices
      clk: sunxi: sun6i-a31-apb0-gates: Add A23 APB0 support

 Documentation/devicetree/bindings/clock/sunxi.txt |   7 ++
 drivers/clk/sunxi/Makefile                        |   4 +-
 drivers/clk/sunxi/clk-factors.c                   |   2 +-
 drivers/clk/sunxi/clk-factors.h                   |   1 +
 drivers/clk/sunxi/clk-sun6i-apb0-gates.c          |  76 ++++++++------
 drivers/clk/sunxi/clk-sun8i-apb0.c                |  68 +++++++++++++
 drivers/clk/sunxi/clk-sunxi.c                     | 119 ++++++++++++++++++++--
 7 files changed, 234 insertions(+), 43 deletions(-)
 create mode 100644 drivers/clk/sunxi/clk-sun8i-apb0.c

Comments

Mike Turquette July 26, 2014, 12:59 a.m. UTC | #1
Quoting Maxime Ripard (2014-07-18 14:13:35)
> Hi Mike,
> 
> Here is the first pull request for the Allwinner clocks changes 
> 
> Unless something major comes up, or we agree quickly on the MMC
> changes I posted yesterday, there shouldn't be any follow up for the
> 3.17 relaese cycle.

Pull. I haven't had time to go through the MMC series yet but I will
prioritise reviewing it. I guess that stuff will go in after 3.17.

Regards,
Mike

> 
> Thanks!
> Maxime
> 
> The following changes since commit 7171511eaec5bf23fb06078f59784a3a0626b38f:
> 
>   Linux 3.16-rc1 (2014-06-15 17:45:28 -1000)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git tags/sunxi-clocks-for-3.17
> 
> for you to fetch changes up to 6c1d66f0da59362cb33ce37d436cd28c77c2b2cb:
> 
>   clk: sunxi: sun6i-a31-apb0-gates: Add A23 APB0 support (2014-07-15 08:53:24 +0200)
> 
> ----------------------------------------------------------------
> Allwinner clocks additions for 3.17
> 
> This pull request adds support for the clocks found in the newly supported
> Allwinner A23 clocks.
> 
> ----------------------------------------------------------------
> Chen-Yu Tsai (9):
>       clk: sunxi: register clock gates with clkdev
>       clk: sunxi: move "ahb_sdram" to protected clock list
>       clk: sunxi: Support factor clocks with N factor starting not from 0
>       clk: sunxi: Add support for table-based divider clocks
>       clk: sunxi: Add A23 clocks support
>       clk: sunxi: Add A23 APB0 divider clock support
>       clk: sunxi: Fix gate indexing for sun6i-a31-apb0-gates
>       clk: sunxi: sun6i-apb0-gates: use bitmaps for valid gate indices
>       clk: sunxi: sun6i-a31-apb0-gates: Add A23 APB0 support
> 
>  Documentation/devicetree/bindings/clock/sunxi.txt |   7 ++
>  drivers/clk/sunxi/Makefile                        |   4 +-
>  drivers/clk/sunxi/clk-factors.c                   |   2 +-
>  drivers/clk/sunxi/clk-factors.h                   |   1 +
>  drivers/clk/sunxi/clk-sun6i-apb0-gates.c          |  76 ++++++++------
>  drivers/clk/sunxi/clk-sun8i-apb0.c                |  68 +++++++++++++
>  drivers/clk/sunxi/clk-sunxi.c                     | 119 ++++++++++++++++++++--
>  7 files changed, 234 insertions(+), 43 deletions(-)
>  create mode 100644 drivers/clk/sunxi/clk-sun8i-apb0.c
> 
> -- 
> Maxime Ripard, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com