diff mbox series

ARM: imx_v6_v7_defconfig: Support i.MX8MN/P/Q

Message ID 1595926504-6121-1-git-send-email-peng.fan@nxp.com
State New
Headers show
Series ARM: imx_v6_v7_defconfig: Support i.MX8MN/P/Q | expand

Commit Message

Peng Fan July 28, 2020, 8:55 a.m. UTC
From: Peng Fan <peng.fan@nxp.com>

i.MX8MN/P/Q is built with AArch64 hardware, this is to support
it could run in AArch32 mode with clock and pinctrl driver enabled.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 arch/arm/configs/imx_v6_v7_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Shawn Guo Aug. 19, 2020, 1:59 p.m. UTC | #1
On Tue, Jul 28, 2020 at 04:55:04PM +0800, peng.fan@nxp.com wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> i.MX8MN/P/Q is built with AArch64 hardware, this is to support
> it could run in AArch32 mode with clock and pinctrl driver enabled.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>

Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 82d3ffb18e70..fbd02365e3b6 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -218,6 +218,9 @@  CONFIG_SPI_GPIO=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_FSL_DSPI=y
 CONFIG_PINCTRL_IMX8MM=y
+CONFIG_PINCTRL_IMX8MN=y
+CONFIG_PINCTRL_IMX8MP=y
+CONFIG_PINCTRL_IMX8MQ=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_SIOX=m
 CONFIG_GPIO_MAX732X=y
@@ -407,6 +410,9 @@  CONFIG_STAGING_MEDIA=y
 CONFIG_VIDEO_IMX_MEDIA=y
 CONFIG_COMMON_CLK_PWM=y
 CONFIG_CLK_IMX8MM=y
+CONFIG_CLK_IMX8MN=y
+CONFIG_CLK_IMX8MP=y
+CONFIG_CLK_IMX8MQ=y
 CONFIG_SOC_IMX8M=y
 CONFIG_IIO=y
 CONFIG_MMA8452=y