[6/7] ARM: dts: imx6ul: add support for TXUL modules on TXUL-Mainboard

Message ID	1507891383-15452-7-git-send-email-LW@KARO-electronics.de
State	New
Headers	show Return-Path: <linux-arm-kernel-bounces+incoming-imx=patchwork.ozlabs.org@lists.infradead.org> From: =?utf-8?q?Lothar_Wa=C3=9Fmann?= <LW@KARO-electronics.de> To: Fabio Estevam <fabio.estevam@nxp.com>, Mark Rutland <mark.rutland@arm.com>, Rob Herring <robh+dt@kernel.org>, Russell King <linux@armlinux.org.uk>, Sascha Hauer <kernel@pengutronix.de>, Shawn Guo <shawnguo@kernel.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 6/7] ARM: dts: imx6ul: add support for TXUL modules on TXUL-Mainboard Date: Fri, 13 Oct 2017 12:43:02 +0200 Message-Id: <1507891383-15452-7-git-send-email-LW@KARO-electronics.de> In-Reply-To: <1507891383-15452-1-git-send-email-LW@KARO-electronics.de> References: <1507891383-15452-1-git-send-email-LW@KARO-electronics.de> MIME-Version: 1.0 summary: Content analysis details: (-2.6 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_MSPIKE_H3 RBL: Good reputation (+3) [80.67.18.44 listed in wl.mailspike.net] -0.7 RCVD_IN_DNSWL_LOW RBL: Sender listed at http://www.dnswl.org/, low trust [80.67.18.44 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record -0.0 SPF_HELO_PASS SPF: HELO matches SPF record -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] -0.0 RCVD_IN_MSPIKE_WL Mailspike good senders Precedence: list Cc: =?utf-8?q?Lothar_Wa=C3=9Fmann?= <LW@KARO-electronics.de> Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+incoming-imx=patchwork.ozlabs.org@lists.infradead.org
Series	ARM: dts: imx6ul: Update dts files for the Ka-Ro TXUL module series \| expand [0/7] ARM: dts: imx6ul: Update dts files for the Ka-Ro TXUL module series [1/7] ARM: dts: imx6ul-txul: enable I2C bus recovery [2/7] ARM: dts: imx6ul-txul: specify ethernet phy reset post-delay [3/7] ARM: dts: imx6ul: add support for TXUL-8013 [4/7] ARM: dts: imx6ul-txul: use panel-simple driver for LCD [5/7] ARM: dts: imx6ul-txul: use interrupts-extended property [6/7] ARM: dts: imx6ul: add support for TXUL modules on TXUL-Mainboard [7/7] ARM: dts: imx6ul-txul: add support for TXUL modules on MB7 baseboard

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 6d25253..f61cee7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -474,9 +474,11 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-pico-hobbit.dtb \ imx6ul-tx6ul-0010.dtb \ imx6ul-tx6ul-0011.dtb \ - imx6ul-tx6ul-mainboard.dtb \ + imx6ul-txul-5010-mainboard.dtb \ + imx6ul-txul-5011-mainboard.dtb \ imx6ull-14x14-evk.dtb \ - imx6ull-txul-8013.dtb + imx6ull-txul-8013.dtb \ + imx6ull-txul-8013-mainboard.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ imx7d-colibri-eval-v3.dtb \ diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts deleted file mode 100644 index 28d055e..0000000 --- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts +++ /dev/null @@ -1,271 +0,0 @@ -/* - * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "imx6ul.dtsi" -#include "imx6ul-tx6ul.dtsi" - -/ { - model = "Ka-Ro electronics TXUL-0010 Module on TXUL Mainboard"; - compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul"; - - aliases { - lcdif_24bit_pins_a = &pinctrl_disp0_3; - mmc0 = &usdhc1; - /delete-property/ mmc1; - serial2 = &uart3; - serial4 = &uart5; - }; - /delete-node/ sound; -}; - -&can1 { - xceiver-supply = <&reg_3v3>; -}; - -&can2 { - xceiver-supply = <&reg_3v3>; -}; - -&ds1339 { - status = "disabled"; -}; - -&fec1 { - pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>; - /delete-node/ mdio; -}; - -&fec2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>; - phy-mode = "rmii"; - phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; - phy-supply = <&reg_3v3_etn>; - phy-handle = <&etnphy1>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - etnphy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_etnphy0_int>; - interrupt-parent = <&gpio5>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>; - status = "okay"; - }; - - etnphy1: ethernet-phy@2 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <2>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_etnphy1_int>; - interrupt-parent = <&gpio4>; - interrupts = <27 IRQ_TYPE_EDGE_FALLING>; - interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>; - status = "okay"; - }; - }; -}; - -&i2c_gpio { - status = "disabled"; -}; - -&i2c2 { - /delete-node/ codec@0a; - /delete-node/ touchscreen@48; - - rtc: mcp7940x@6f { - compatible = "microchip,mcp7940x"; - reg = <0x6f>; - }; -}; - -&kpp { - status = "disabled"; -}; - -&lcdif { - pinctrl-0 = <&pinctrl_disp0_3>; -}; - -&reg_usbotg_vbus{ - status = "disabled"; -}; - -&usdhc1 { - pinctrl-0 = <&pinctrl_usdhc1>; - non-removable; - /delete-property/ cd-gpios; - cap-sdio-irq; -}; - -&uart1 { - pinctrl-0 = <&pinctrl_uart1>; - /delete-property/ uart-has-rtscts; -}; - -&uart2 { - pinctrl-0 = <&pinctrl_uart2>; - /delete-property/ uart-has-rtscts; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&uart6 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart6>; - status = "okay"; -}; - -&uart7 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart7>; - status = "okay"; -}; - -&uart8 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart8>; - status = "disabled"; /* conflicts with LCDIF */ -}; - -&iomuxc { - hoggrp { - fsl,pins = < - MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x0b0b0 /* WLAN_RESET */ - >; - }; - - pinctrl_disp0_3: disp0grp-3 { - fsl,pins = < - MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */ - MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */ - MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x10 /* HSYNC */ - MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x10 /* VSYNC */ - MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x10 - MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x10 - MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x10 - MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x10 - MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x10 - MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x10 - /* LCD_DATA08..09 not wired */ - MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x10 - MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x10 - MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x10 - MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x10 - MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x10 - MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x10 - /* LCD_DATA16..17 not wired */ - MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x10 - MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x10 - MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x10 - MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x10 - MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x10 - MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x10 - >; - }; - - pinctrl_enet2_mdio: enet2-mdiogrp { - fsl,pins = < - MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x0b0b0 - MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x0b0b0 - MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x0b0b0 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x0b0b0 - MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x0b0b0 - >; - }; - - pinctrl_uart6: uart6grp { - fsl,pins = < - MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x0b0b0 - MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x0b0b0 - >; - }; - - pinctrl_uart7: uart7grp { - fsl,pins = < - MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0b0b0 - MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x0b0b0 - >; - }; - - pinctrl_uart8: uart8grp { - fsl,pins = < - MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0b0b0 - MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x0b0b0 - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6ul-txul-5010-mainboard.dts b/arch/arm/boot/dts/imx6ul-txul-5010-mainboard.dts new file mode 100644 index 0000000..b2d3a51 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-txul-5010-mainboard.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6ul-tx6ul-0010.dts" +#include "imx6ul-txul-mainboard.dtsi" + +/ { + model = "Ka-Ro electronics TXUL-5010/-0010 Module on TXUL Mainboard"; +}; diff --git a/arch/arm/boot/dts/imx6ul-txul-5011-mainboard.dts b/arch/arm/boot/dts/imx6ul-txul-5011-mainboard.dts new file mode 100644 index 0000000..fbdea92 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-txul-5011-mainboard.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6ul-tx6ul-0011.dts" +#include "imx6ul-txul-mainboard.dtsi" + +/ { + model = "Ka-Ro electronics TXUL-5011/-0011 Module on TXUL Mainboard"; +}; diff --git a/arch/arm/boot/dts/imx6ul-txul-mainboard.dtsi b/arch/arm/boot/dts/imx6ul-txul-mainboard.dtsi new file mode 100644 index 0000000..8bb986f --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-txul-mainboard.dtsi @@ -0,0 +1,265 @@ +/* + * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + aliases { + lcdif_24bit_pins_a = &pinctrl_disp0_3; + mmc0 = &usdhc1; + /delete-property/ mmc1; + serial2 = &uart3; + serial4 = &uart5; + }; + + /delete-node/ sound; +}; + +&can1 { + xceiver-supply = <&reg_3v3>; +}; + +&can2 { + xceiver-supply = <&reg_3v3>; +}; + +&ds1339 { + status = "disabled"; +}; + +&fec1 { + pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>; + /delete-node/ mdio; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio &pinctrl_etnphy1_rst>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + phy-supply = <&reg_3v3_etn>; + phy-handle = <&etnphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + etnphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etnphy0_int>; + interrupt-parent = <&gpio5>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio5 5 IRQ_TYPE_EDGE_FALLING>; + status = "okay"; + }; + + etnphy1: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etnphy1_int>; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&gpio4 27 IRQ_TYPE_EDGE_FALLING>; + status = "okay"; + }; + }; +}; + +&i2c_gpio { + status = "disabled"; +}; + +&i2c2 { + /delete-node/ codec@0a; + /delete-node/ touchscreen@48; + + rtc: mcp7940x@6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + }; +}; + +&kpp { + status = "disabled"; +}; + +&lcdif { + pinctrl-0 = <&pinctrl_disp0_3>; +}; + +&reg_usbotg_vbus { + status = "disabled"; +}; + +&usdhc1 { + pinctrl-0 = <&pinctrl_usdhc1>; + non-removable; + /delete-property/ cd-gpios; + cap-sdio-irq; +}; + +&uart1 { + pinctrl-0 = <&pinctrl_uart1>; + /delete-property/ uart-has-rtscts; +}; + +&uart2 { + pinctrl-0 = <&pinctrl_uart2>; + /delete-property/ uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7>; + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8>; + status = "disabled"; /* conflicts with LCDIF */ +}; + +&iomuxc { + hoggrp { + fsl,pins = < + MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x0b0b0 /* WLAN_RESET */ + >; + }; + + pinctrl_disp0_3: disp0grp-3 { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x10 /* LSCLK */ + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x10 /* OE_ACD */ + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x10 /* HSYNC */ + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x10 /* VSYNC */ + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x10 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x10 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x10 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x10 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x10 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x10 + /* LCD_DATA08..09 not wired */ + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x10 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x10 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x10 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x10 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x10 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x10 + /* LCD_DATA16..17 not wired */ + MX6UL_PAD_LCD_DATA18__LCDIF_DATA18 0x10 + MX6UL_PAD_LCD_DATA19__LCDIF_DATA19 0x10 + MX6UL_PAD_LCD_DATA20__LCDIF_DATA20 0x10 + MX6UL_PAD_LCD_DATA21__LCDIF_DATA21 0x10 + MX6UL_PAD_LCD_DATA22__LCDIF_DATA22 0x10 + MX6UL_PAD_LCD_DATA23__LCDIF_DATA23 0x10 + >; + }; + + pinctrl_enet2_mdio: enet2-mdiogrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x0b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x0b0b0 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x0b0b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX 0x0b0b0 + MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX 0x0b0b0 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX6UL_PAD_CSI_MCLK__UART6_DCE_TX 0x0b0b0 + MX6UL_PAD_CSI_PIXCLK__UART6_DCE_RX 0x0b0b0 + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA16__UART7_DCE_TX 0x0b0b0 + MX6UL_PAD_LCD_DATA17__UART7_DCE_RX 0x0b0b0 + >; + }; + + pinctrl_uart8: uart8grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA20__UART8_DCE_TX 0x0b0b0 + MX6UL_PAD_LCD_DATA21__UART8_DCE_RX 0x0b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ull-txul-8013-mainboard.dts b/arch/arm/boot/dts/imx6ull-txul-8013-mainboard.dts new file mode 100644 index 0000000..34d42e5 --- /dev/null +++ b/arch/arm/boot/dts/imx6ull-txul-8013-mainboard.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6ull-txul-8013.dts" +#include "imx6ul-txul-mainboard.dtsi" + +/ { + model = "Ka-Ro electronics TXUL-8013 Module on TXUL Mainboard"; +};

[6/7] ARM: dts: imx6ul: add support for TXUL modules on TXUL-Mainboard

Commit Message

Comments

Patch