| Message ID | 1507108713-10686-2-git-send-email-fabrizio.castro@bp.renesas.com |
|---|---|
| State | New |
| Headers | show |
| Series | ARM: dts: iwg20d-q7: New DT architecture | expand |
Hi Fabrizio, On Wed, Oct 4, 2017 at 11:18 AM, Fabrizio Castro <fabrizio.castro@bp.renesas.com> wrote: > Since the same carrier board may host RZ/G1M and RZ/G1N based > Systems on Module, the DT architecture for iwg20d-q7 needs > better decoupling. This patch provides: > * iwg20d-q7-common.dtsi - its purpose is to define the carrier > board definitions, and its content is basically the same > as the previous version of r8a7743-iwg20d-q7.dts, only it > has no reference to the SoM .dtsi, and that's why the > filename doesn't mention the SoC name any more. > * r8a7743-iwg20d-q7.dts - its new purpose is to put together > the SoM .dtsi (r8a7743-iwg20m.dtsi) and the carrier board > .dtsi defined by this very patch, along with "model" and > "compatible" properties. > The final DT architecture to describe the board is now: > r8a7743-iwg20d-q7.dts # Carrier Board + SoM > ├── r8a7743-iwg20m.dtsi # SoM > │ └── r8a7743.dtsi # SoC > └── iwg20d-q7-common.dtsi # Carrier Board > and maximizes the reuse of the definitions for the carrier board > and for the SoM. > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Thanks for your patch! Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- /dev/null > +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi > +&pfc { > + i2c2_pins: i2c2 { > + groups = "i2c2"; > + function = "i2c2"; > + }; > + > + scif0_pins: scif0 { > + groups = "scif0_data_d"; > + function = "scif0"; > + }; > + > + avb_pins: avb { > + groups = "avb_mdio", "avb_gmii"; > + function = "avb"; > + }; Perhaps you want to use this opportunity to restore alphabetical sort order? > +&scif0 { [...] > +}; > + > +&avb { Likewise. Can be a separate patch, though. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Hello Geert, > > Hi Fabrizio, > > On Wed, Oct 4, 2017 at 11:18 AM, Fabrizio Castro > <fabrizio.castro@bp.renesas.com> wrote: > > Since the same carrier board may host RZ/G1M and RZ/G1N based > > Systems on Module, the DT architecture for iwg20d-q7 needs > > better decoupling. This patch provides: > > * iwg20d-q7-common.dtsi - its purpose is to define the carrier > > board definitions, and its content is basically the same > > as the previous version of r8a7743-iwg20d-q7.dts, only it > > has no reference to the SoM .dtsi, and that's why the > > filename doesn't mention the SoC name any more. > > * r8a7743-iwg20d-q7.dts - its new purpose is to put together > > the SoM .dtsi (r8a7743-iwg20m.dtsi) and the carrier board > > .dtsi defined by this very patch, along with "model" and > > "compatible" properties. > > The final DT architecture to describe the board is now: > > r8a7743-iwg20d-q7.dts # Carrier Board + SoM > > ├── r8a7743-iwg20m.dtsi # SoM > > │ └── r8a7743.dtsi # SoC > > └── iwg20d-q7-common.dtsi # Carrier Board > > and maximizes the reuse of the definitions for the carrier board > > and for the SoM. > > > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> > > Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> > > Thanks for your patch! > > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > --- /dev/null > > +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi > > > +&pfc { > > + i2c2_pins: i2c2 { > > + groups = "i2c2"; > > + function = "i2c2"; > > + }; > > + > > + scif0_pins: scif0 { > > + groups = "scif0_data_d"; > > + function = "scif0"; > > + }; > > + > > + avb_pins: avb { > > + groups = "avb_mdio", "avb_gmii"; > > + function = "avb"; > > + }; > > Perhaps you want to use this opportunity to restore alphabetical sort order? good idea > > > +&scif0 { > > [...] > > > +}; > > + > > +&avb { > > Likewise. > > Can be a separate patch, though. I'll send a V2 for this. Thanks, Fab > > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like that. > -- Linus Torvalds Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
Some of the serial interfaces are exposed on the camera daughter board. The camera daughter board can be connected to the carrier board by means of expansion connectors 1, 2 and 3. The carrier board may host an RZ/G1M or an RZ/G1N based SoM. While adding support for the serial interfaces on the camera daughter board we faced the dilemma of how to properly describe all of the possible HW configurations and how to maximize code reuse. The best option would be to use device tree overlays, however there is still some work to be done on that front before actually using them, therefore for the time being we decided to provide .dtsi files to describe the carrier board and the camera daughter board, and provide .dts files to describe the HW configurations we need to support. Best regards, Fabrizio Castro (2): ARM: dts: iwg20d-q7: Rework DT architecture ARM: dts: iwg20d-q7-dbcm-ca: Add device trees for camera DB arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/iwg20d-q7-common.dtsi | 147 ++++++++++++++++++++++++ arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi | 43 +++++++ arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts | 19 +++ arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 139 +--------------------- 5 files changed, 212 insertions(+), 137 deletions(-) create mode 100644 arch/arm/boot/dts/iwg20d-q7-common.dtsi create mode 100644 arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi create mode 100644 arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts
On Fri, Oct 06, 2017 at 06:59:51PM +0100, Fabrizio Castro wrote: > Some of the serial interfaces are exposed on the camera daughter board. > The camera daughter board can be connected to the carrier board > by means of expansion connectors 1, 2 and 3. The carrier board may host > an RZ/G1M or an RZ/G1N based SoM. > While adding support for the serial interfaces on the camera daughter > board we faced the dilemma of how to properly describe all of the > possible HW configurations and how to maximize code reuse. > The best option would be to use device tree overlays, however there is > still some work to be done on that front before actually using them, > therefore for the time being we decided to provide .dtsi files to > describe the carrier board and the camera daughter board, and provide > .dts files to describe the HW configurations we need to support. > > Best regards, > > Fabrizio Castro (2): > ARM: dts: iwg20d-q7: Rework DT architecture > ARM: dts: iwg20d-q7-dbcm-ca: Add device trees for camera DB Thanks, applied.
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi new file mode 100644 index 0000000..f9d153c --- /dev/null +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -0,0 +1,147 @@ +/* + * Device Tree Source for the iWave-RZ/G1M/G1N Qseven carrier board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + aliases { + serial0 = &scif0; + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + vcc_sdhi1: regulator-vcc-sdhi1 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio1 16 GPIO_ACTIVE_LOW>; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&pfc { + i2c2_pins: i2c2 { + groups = "i2c2"; + function = "i2c2"; + }; + + scif0_pins: scif0 { + groups = "scif0_data_d"; + function = "scif0"; + }; + + avb_pins: avb { + groups = "avb_mdio", "avb_gmii"; + function = "avb"; + }; + + sdhi1_pins: sd1 { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <3300>; + }; + + sdhi1_pins_uhs: sd1_uhs { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <1800>; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + groups = "usb1"; + function = "usb1"; + }; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy3>; + phy-mode = "gmii"; + renesas,no-ether-link; + status = "okay"; + + phy3: ethernet-phy@3 { + reg = <3>; + micrel,led-mode = <1>; + }; +}; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi1>; + vqmmc-supply = <&vccq_sdhi1>; + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + sd-uhs-sdr50; + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + rtc@68 { + compatible = "ti,bq32000"; + reg = <0x68>; + }; +}; + +&pci0 { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts index 0136864..6aa6b74 100644 --- a/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts +++ b/arch/arm/boot/dts/r8a7743-iwg20d-q7.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the iWave-RZG1M Qseven carrier board + * Device Tree Source for the iWave-RZ/G1M Qseven board * * Copyright (C) 2017 Renesas Electronics Corp. * @@ -10,144 +10,9 @@ /dts-v1/; #include "r8a7743-iwg20m.dtsi" +#include "iwg20d-q7-common.dtsi" / { model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M"; compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; - - aliases { - serial0 = &scif0; - ethernet0 = &avb; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = "serial0:115200n8"; - }; - - vcc_sdhi1: regulator-vcc-sdhi1 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI1 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - - vccq_sdhi1: regulator-vccq-sdhi1 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI1 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; - gpios-states = <1>; - states = <3300000 1 - 1800000 0>; - }; -}; - -&pfc { - i2c2_pins: i2c2 { - groups = "i2c2"; - function = "i2c2"; - }; - - scif0_pins: scif0 { - groups = "scif0_data_d"; - function = "scif0"; - }; - - avb_pins: avb { - groups = "avb_mdio", "avb_gmii"; - function = "avb"; - }; - - sdhi1_pins: sd1 { - groups = "sdhi1_data4", "sdhi1_ctrl"; - function = "sdhi1"; - power-source = <3300>; - }; - - sdhi1_pins_uhs: sd1_uhs { - groups = "sdhi1_data4", "sdhi1_ctrl"; - function = "sdhi1"; - power-source = <1800>; - }; - - usb0_pins: usb0 { - groups = "usb0"; - function = "usb0"; - }; - - usb1_pins: usb1 { - groups = "usb1"; - function = "usb1"; - }; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&avb { - pinctrl-0 = <&avb_pins>; - pinctrl-names = "default"; - - phy-handle = <&phy3>; - phy-mode = "gmii"; - renesas,no-ether-link; - status = "okay"; - - phy3: ethernet-phy@3 { - reg = <3>; - micrel,led-mode = <1>; - }; -}; - -&sdhi1 { - pinctrl-0 = <&sdhi1_pins>; - pinctrl-1 = <&sdhi1_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi1>; - vqmmc-supply = <&vccq_sdhi1>; - cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; - sd-uhs-sdr50; - status = "okay"; -}; - -&i2c2 { - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - rtc@68 { - compatible = "ti,bq32000"; - reg = <0x68>; - }; -}; - -&pci0 { - status = "okay"; - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; -}; - -&pci1 { - status = "okay"; - pinctrl-0 = <&usb1_pins>; - pinctrl-names = "default"; -}; - -&usbphy { - status = "okay"; };