| Message ID | 1446648600-27297-1-git-send-email-christoffer.dall@linaro.org |
|---|---|
| State | New |
| Headers | show |
On 04/11/2015 15:49, Christoffer Dall wrote: > Hi Paolo, > > Here is the set of changes for v4.4. Some of the commits listed here were > already merged as fixes for v4.3, but since they are not in kvm/next yet, they > show up here. Let me know if you want me to handle this differently somehow. > > As usual, there's a lot of churn in the vgic and timer code, and then there are > number of smaller tweaks and adjustments. Nothing major this time around. For > a detailed description, see below. > > The following changes since commit 920552b213e3dc832a874b4e7ba29ecddbab31bc: > > KVM: disable halt_poll_ns as default for s390x (2015-09-25 10:31:30 +0200) > > are available in the git repository at: > > git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm.git tags/kvm-arm-for-4.4 > > for you to fetch changes up to 26caea7693cb99833fe4ecc544c842289d6b3f69: > > KVM: arm/arm64: Merge vgic_set_lr() and vgic_sync_lr_elrsr() (2015-11-04 15:29:49 +0100) > > > Thanks, > -Christoffer > > ---------------------------------------------------------------- > KVM/ARM Changes for v4.4-rc1 > > Includes a number of fixes for the arch-timer, introducing proper > level-triggered semantics for the arch-timers, a series of patches to > synchronously halt a guest (prerequisite for IRQ forwarding), some tracepoint > improvements, a tweak for the EL2 panic handlers, some more VGIC cleanups > getting rid of redundant state, and finally a stylistic change that gets rid of > some ctags warnings. > > Christoffer Dall (10): > KVM: Add kvm_arch_vcpu_{un}blocking callbacks > arm/arm64: KVM: arch_timer: Only schedule soft timer on vcpu_block > arm/arm64: KVM: vgic: Factor out level irq processing on guest exit > arm/arm64: KVM: Implement GICD_ICFGR as RO for PPIs > arm/arm64: KVM: Use appropriate define in VGIC reset code > arm/arm64: KVM: Add forwarded physical interrupts documentation > arm/arm64: KVM: Rework the arch timer to use level-triggered semantics > arm/arm64: KVM: Support edge-triggered forwarded interrupts > arm/arm64: KVM: Improve kvm_exit tracepoint > arm/arm64: KVM: Add tracepoints for vgic and timer > > Eric Auger (4): > KVM: arm/arm64: rename pause into power_off > KVM: arm/arm64: check power_off in kvm_arch_vcpu_runnable > KVM: arm/arm64: check power_off in critical section before VCPU run > KVM: arm/arm64: implement kvm_arm_[halt,resume]_guest > > Mark Rutland (1): > arm64: kvm: restore EL1N SP for panic > > Michal Marek (1): > KVM: arm: Do not indent the arguments of DECLARE_BITMAP > > Pavel Fedin (4): > KVM: arm/arm64: Fix vGIC documentation > KVM: arm/arm64: Optimize away redundant LR tracking > KVM: arm/arm64: Clean up vgic_retire_lr() and surroundings > KVM: arm/arm64: Merge vgic_set_lr() and vgic_sync_lr_elrsr() > > Wei Huang (1): > arm/arm64: KVM : Enable vhost device selection under KVM config menu > > Documentation/virtual/kvm/arm/vgic-mapped-irqs.txt | 187 +++++++++++++ > Documentation/virtual/kvm/devices/arm-vgic.txt | 18 +- > arch/arm/include/asm/kvm_arm.h | 20 ++ > arch/arm/include/asm/kvm_host.h | 5 +- > arch/arm/kvm/Kconfig | 2 + > arch/arm/kvm/arm.c | 76 +++-- > arch/arm/kvm/psci.c | 10 +- > arch/arm/kvm/trace.h | 10 +- > arch/arm64/include/asm/kvm_arm.h | 16 ++ > arch/arm64/include/asm/kvm_host.h | 5 +- > arch/arm64/kvm/Kconfig | 2 + > arch/arm64/kvm/hyp.S | 8 + > arch/mips/include/asm/kvm_host.h | 2 + > arch/powerpc/include/asm/kvm_host.h | 2 + > arch/s390/include/asm/kvm_host.h | 2 + > arch/x86/include/asm/kvm_host.h | 3 + > include/kvm/arm_arch_timer.h | 4 +- > include/kvm/arm_vgic.h | 16 +- > include/linux/kvm_host.h | 2 + > virt/kvm/arm/arch_timer.c | 173 ++++++++---- > virt/kvm/arm/trace.h | 63 +++++ > virt/kvm/arm/vgic-v2.c | 6 +- > virt/kvm/arm/vgic-v3.c | 6 +- > virt/kvm/arm/vgic.c | 308 ++++++++------------- > virt/kvm/kvm_main.c | 3 + > 25 files changed, 646 insertions(+), 303 deletions(-) > create mode 100644 Documentation/virtual/kvm/arm/vgic-mapped-irqs.txt > create mode 100644 virt/kvm/arm/trace.h > Pulled into kvm/next, thanks. Paolo
Hi Paolo, Here is the set of changes for v4.4. Some of the commits listed here were already merged as fixes for v4.3, but since they are not in kvm/next yet, they show up here. Let me know if you want me to handle this differently somehow. As usual, there's a lot of churn in the vgic and timer code, and then there are number of smaller tweaks and adjustments. Nothing major this time around. For a detailed description, see below. The following changes since commit 920552b213e3dc832a874b4e7ba29ecddbab31bc: KVM: disable halt_poll_ns as default for s390x (2015-09-25 10:31:30 +0200) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm.git tags/kvm-arm-for-4.4 for you to fetch changes up to 26caea7693cb99833fe4ecc544c842289d6b3f69: KVM: arm/arm64: Merge vgic_set_lr() and vgic_sync_lr_elrsr() (2015-11-04 15:29:49 +0100) Thanks, -Christoffer ---------------------------------------------------------------- KVM/ARM Changes for v4.4-rc1 Includes a number of fixes for the arch-timer, introducing proper level-triggered semantics for the arch-timers, a series of patches to synchronously halt a guest (prerequisite for IRQ forwarding), some tracepoint improvements, a tweak for the EL2 panic handlers, some more VGIC cleanups getting rid of redundant state, and finally a stylistic change that gets rid of some ctags warnings. Christoffer Dall (10): KVM: Add kvm_arch_vcpu_{un}blocking callbacks arm/arm64: KVM: arch_timer: Only schedule soft timer on vcpu_block arm/arm64: KVM: vgic: Factor out level irq processing on guest exit arm/arm64: KVM: Implement GICD_ICFGR as RO for PPIs arm/arm64: KVM: Use appropriate define in VGIC reset code arm/arm64: KVM: Add forwarded physical interrupts documentation arm/arm64: KVM: Rework the arch timer to use level-triggered semantics arm/arm64: KVM: Support edge-triggered forwarded interrupts arm/arm64: KVM: Improve kvm_exit tracepoint arm/arm64: KVM: Add tracepoints for vgic and timer Eric Auger (4): KVM: arm/arm64: rename pause into power_off KVM: arm/arm64: check power_off in kvm_arch_vcpu_runnable KVM: arm/arm64: check power_off in critical section before VCPU run KVM: arm/arm64: implement kvm_arm_[halt,resume]_guest Mark Rutland (1): arm64: kvm: restore EL1N SP for panic Michal Marek (1): KVM: arm: Do not indent the arguments of DECLARE_BITMAP Pavel Fedin (4): KVM: arm/arm64: Fix vGIC documentation KVM: arm/arm64: Optimize away redundant LR tracking KVM: arm/arm64: Clean up vgic_retire_lr() and surroundings KVM: arm/arm64: Merge vgic_set_lr() and vgic_sync_lr_elrsr() Wei Huang (1): arm/arm64: KVM : Enable vhost device selection under KVM config menu Documentation/virtual/kvm/arm/vgic-mapped-irqs.txt | 187 +++++++++++++ Documentation/virtual/kvm/devices/arm-vgic.txt | 18 +- arch/arm/include/asm/kvm_arm.h | 20 ++ arch/arm/include/asm/kvm_host.h | 5 +- arch/arm/kvm/Kconfig | 2 + arch/arm/kvm/arm.c | 76 +++-- arch/arm/kvm/psci.c | 10 +- arch/arm/kvm/trace.h | 10 +- arch/arm64/include/asm/kvm_arm.h | 16 ++ arch/arm64/include/asm/kvm_host.h | 5 +- arch/arm64/kvm/Kconfig | 2 + arch/arm64/kvm/hyp.S | 8 + arch/mips/include/asm/kvm_host.h | 2 + arch/powerpc/include/asm/kvm_host.h | 2 + arch/s390/include/asm/kvm_host.h | 2 + arch/x86/include/asm/kvm_host.h | 3 + include/kvm/arm_arch_timer.h | 4 +- include/kvm/arm_vgic.h | 16 +- include/linux/kvm_host.h | 2 + virt/kvm/arm/arch_timer.c | 173 ++++++++---- virt/kvm/arm/trace.h | 63 +++++ virt/kvm/arm/vgic-v2.c | 6 +- virt/kvm/arm/vgic-v3.c | 6 +- virt/kvm/arm/vgic.c | 308 ++++++++------------- virt/kvm/kvm_main.c | 3 + 25 files changed, 646 insertions(+), 303 deletions(-) create mode 100644 Documentation/virtual/kvm/arm/vgic-mapped-irqs.txt create mode 100644 virt/kvm/arm/trace.h