| Message ID | 1430755147-12086-3-git-send-email-g.portay@overkiz.com |
|---|---|
| State | New |
| Headers | show |
Le 04/05/2015 17:59, Gaël PORTAY a écrit : > Add DT file for Kizbox mini board. > This board is based on Atmel's AT91SAM9G25 SoC. > > Signed-off-by: Gaël PORTAY <g.portay@overkiz.com> > Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> > Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Nitpicking below... > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/at91-kizboxmini.dts | 130 ++++++++++++++++++++++++++++++++++ > 2 files changed, 131 insertions(+) > create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 21726fd..4bf72c0 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -30,6 +30,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ > at91sam9rlek.dtb \ > at91-ariag25.dtb \ > at91-cosino_mega2560.dtb \ > + at91-kizboxmini.dtb \ > at91sam9g15ek.dtb \ > at91sam9g25ek.dtb \ > at91sam9g35ek.dtb \ > diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts > new file mode 100644 > index 0000000..7a899ca > --- /dev/null > +++ b/arch/arm/boot/dts/at91-kizboxmini.dts > @@ -0,0 +1,130 @@ > +/* > + * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board > + * > + * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com> > + * > + * Licensed under GPLv2 or later. > + */ > +/dts-v1/; > +#include "at91sam9g25.dtsi" > +#include "at91sam9x5.dtsi" Not needed as already included in at91sam9g25.dtsi: I remove it before applying the patch. Bye, > +#include <dt-bindings/pwm/pwm.h> > + > +/ { > + model = "Overkiz Kizbox mini"; > + compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9"; > + > + chosen { > + bootargs = "ubi.mtd=ubi"; > + linux,stdout-path = &dbgu; > + }; > + > + memory { > + reg = <0x20000000 0x8000000>; > + }; > + > + clocks { > + slow_xtal { > + clock-frequency = <32768>; > + }; > + > + main_xtal { > + clock-frequency = <12000000>; > + }; > + }; > + > + ahb { > + apb { > + usart0: serial@f801c000 { > + status = "okay"; > + }; > + > + macb0: ethernet@f802c000 { > + phy-mode = "rmii"; > + status = "okay"; > + }; > + > + pwm0: pwm@f8034000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm0_pwm0_1 > + &pinctrl_pwm0_pwm1_1>; > + status = "okay"; > + }; > + > + dbgu: serial@fffff200 { > + status = "okay"; > + }; > + > + watchdog@fffffe40 { > + status = "okay"; > + }; > + }; > + > + usb0: ohci@00600000 { > + num-ports = <1>; > + status = "okay"; > + }; > + > + usb1: ehci@00700000 { > + status = "okay"; > + }; > + > + nand0: nand@40000000 { > + nand-bus-width = <8>; > + nand-ecc-mode = "hw"; > + atmel,has-pmecc; > + atmel,pmecc-cap = <4>; > + atmel,pmecc-sector-size = <512>; > + nand-on-flash-bbt; > + status = "okay"; > + > + bootstrap@0 { > + label = "bootstrap"; > + reg = <0x0 0x20000>; > + }; > + > + ubi@20000 { > + label = "ubi"; > + reg = <0x20000 0x7fe0000>; > + }; > + }; > + }; > + > + gpio_keys { > + compatible = "gpio-keys"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + prog { > + label = "PB_PROG"; > + gpios = <&pioC 17 GPIO_ACTIVE_LOW>; > + linux,code = <0x102>; > + gpio-key,wakeup; > + }; > + > + reset { > + label = "PB_RST"; > + gpios = <&pioC 16 GPIO_ACTIVE_LOW>; > + linux,code = <0x100>; > + gpio-key,wakeup; > + }; > + }; > + > + pwm_leds { > + compatible = "pwm-leds"; > + > + green { > + label = "pwm:green:user"; > + pwms = <&pwm0 0 10000000 0>; > + max-brightness = <255>; > + linux,default-trigger = "default-on"; > + }; > + > + red { > + label = "pwm:red:user"; > + pwms = <&pwm0 1 10000000 0>; > + max-brightness = <255>; > + linux,default-trigger = "default-on"; > + }; > + }; > +}; >
Thanks Sent from my Cyanogen phone On May 11, 2015 11:17 AM, Nicolas Ferre <nicolas.ferre@atmel.com> wrote: > > Le 04/05/2015 17:59, Gaël PORTAY a écrit : > > Add DT file for Kizbox mini board. > > This board is based on Atmel's AT91SAM9G25 SoC. > > > > Signed-off-by: Gaël PORTAY <g.portay@overkiz.com> > > Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> > > Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> > > Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> > Nitpicking below... > > > --- > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/at91-kizboxmini.dts | 130 ++++++++++++++++++++++++++++++++++ > > 2 files changed, 131 insertions(+) > > create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts > > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > index 21726fd..4bf72c0 100644 > > --- a/arch/arm/boot/dts/Makefile > > +++ b/arch/arm/boot/dts/Makefile > > @@ -30,6 +30,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ > > at91sam9rlek.dtb \ > > at91-ariag25.dtb \ > > at91-cosino_mega2560.dtb \ > > + at91-kizboxmini.dtb \ > > at91sam9g15ek.dtb \ > > at91sam9g25ek.dtb \ > > at91sam9g35ek.dtb \ > > diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts > > new file mode 100644 > > index 0000000..7a899ca > > --- /dev/null > > +++ b/arch/arm/boot/dts/at91-kizboxmini.dts > > @@ -0,0 +1,130 @@ > > +/* > > + * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board > > + * > > + * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com> > > + * > > + * Licensed under GPLv2 or later. > > + */ > > +/dts-v1/; > > +#include "at91sam9g25.dtsi" > > +#include "at91sam9x5.dtsi" > > Not needed as already included in at91sam9g25.dtsi: I remove it before > applying the patch. > > Bye, > > > +#include <dt-bindings/pwm/pwm.h> > > + > > +/ { > > + model = "Overkiz Kizbox mini"; > > + compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9"; > > + > > + chosen { > > + bootargs = "ubi.mtd=ubi"; > > + linux,stdout-path = &dbgu; > > + }; > > + > > + memory { > > + reg = <0x20000000 0x8000000>; > > + }; > > + > > + clocks { > > + slow_xtal { > > + clock-frequency = <32768>; > > + }; > > + > > + main_xtal { > > + clock-frequency = <12000000>; > > + }; > > + }; > > + > > + ahb { > > + apb { > > + usart0: serial@f801c000 { > > + status = "okay"; > > + }; > > + > > + macb0: ethernet@f802c000 { > > + phy-mode = "rmii"; > > + status = "okay"; > > + }; > > + > > + pwm0: pwm@f8034000 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_pwm0_pwm0_1 > > + &pinctrl_pwm0_pwm1_1>; > > + status = "okay"; > > + }; > > + > > + dbgu: serial@fffff200 { > > + status = "okay"; > > + }; > > + > > + watchdog@fffffe40 { > > + status = "okay"; > > + }; > > + }; > > + > > + usb0: ohci@00600000 { > > + num-ports = <1>; > > + status = "okay"; > > + }; > > + > > + usb1: ehci@00700000 { > > + status = "okay"; > > + }; > > + > > + nand0: nand@40000000 { > > + nand-bus-width = <8>; > > + nand-ecc-mode = "hw"; > > + atmel,has-pmecc; > > + atmel,pmecc-cap = <4>; > > + atmel,pmecc-sector-size = <512>; > > + nand-on-flash-bbt; > > + status = "okay"; > > + > > + bootstrap@0 { > > + label = "bootstrap"; > > + reg = <0x0 0x20000>; > > + }; > > + > > + ubi@20000 { > > + label = "ubi"; > > + reg = <0x20000 0x7fe0000>; > > + }; > > + }; > > + }; > > + > > + gpio_keys { > > + compatible = "gpio-keys"; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + prog { > > + label = "PB_PROG"; > > + gpios = <&pioC 17 GPIO_ACTIVE_LOW>; > > + linux,code = <0x102>; > > + gpio-key,wakeup; > > + }; > > + > > + reset { > > + label = "PB_RST"; > > + gpios = <&pioC 16 GPIO_ACTIVE_LOW>; > > + linux,code = <0x100>; > > + gpio-key,wakeup; > > + }; > > + }; > > + > > + pwm_leds { > > + compatible = "pwm-leds"; > > + > > + green { > > + label = "pwm:green:user"; > > + pwms = <&pwm0 0 10000000 0>; > > + max-brightness = <255>; > > + linux,default-trigger = "default-on"; > > + }; > > + > > + red { > > + label = "pwm:red:user"; > > + pwms = <&pwm0 1 10000000 0>; > > + max-brightness = <255>; > > + linux,default-trigger = "default-on"; > > + }; > > + }; > > +}; > > > > > -- > Nicolas Ferre
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 21726fd..4bf72c0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -30,6 +30,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ at91sam9rlek.dtb \ at91-ariag25.dtb \ at91-cosino_mega2560.dtb \ + at91-kizboxmini.dtb \ at91sam9g15ek.dtb \ at91sam9g25ek.dtb \ at91sam9g35ek.dtb \ diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts new file mode 100644 index 0000000..7a899ca --- /dev/null +++ b/arch/arm/boot/dts/at91-kizboxmini.dts @@ -0,0 +1,130 @@ +/* + * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board + * + * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91sam9g25.dtsi" +#include "at91sam9x5.dtsi" +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Overkiz Kizbox mini"; + compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "ubi.mtd=ubi"; + linux,stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + usart0: serial@f801c000 { + status = "okay"; + }; + + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + pwm0: pwm@f8034000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm0_1 + &pinctrl_pwm0_pwm1_1>; + status = "okay"; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + + usb0: ohci@00600000 { + num-ports = <1>; + status = "okay"; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + prog { + label = "PB_PROG"; + gpios = <&pioC 17 GPIO_ACTIVE_LOW>; + linux,code = <0x102>; + gpio-key,wakeup; + }; + + reset { + label = "PB_RST"; + gpios = <&pioC 16 GPIO_ACTIVE_LOW>; + linux,code = <0x100>; + gpio-key,wakeup; + }; + }; + + pwm_leds { + compatible = "pwm-leds"; + + green { + label = "pwm:green:user"; + pwms = <&pwm0 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + red { + label = "pwm:red:user"; + pwms = <&pwm0 1 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + }; +};