From patchwork Wed Apr 8 08:17:56 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Ga=C3=ABl_PORTAY?= X-Patchwork-Id: 459163 Return-Path: X-Original-To: incoming-imx@patchwork.ozlabs.org Delivered-To: patchwork-incoming-imx@bilbo.ozlabs.org Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2001:1868:205::9]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 4400D14016A for ; Wed, 8 Apr 2015 18:21:56 +1000 (AEST) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1YflCO-0004zL-PD; Wed, 08 Apr 2015 08:19:00 +0000 Received: from 20.mo5.mail-out.ovh.net ([91.121.55.239]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1YflCK-0004rg-FU for linux-arm-kernel@lists.infradead.org; Wed, 08 Apr 2015 08:18:57 +0000 Received: from mail640.ha.ovh.net (b9.ovh.net [213.186.33.59]) by mo5.mail-out.ovh.net (Postfix) with SMTP id AF160FF9CE3 for ; Wed, 8 Apr 2015 10:18:32 +0200 (CEST) Received: from b0.ovh.net (HELO queueout) (213.186.33.50) by b0.ovh.net with SMTP; 8 Apr 2015 10:18:31 +0200 Received: from unknown (HELO gael-pc.int.overkiz.com) (g.portay@overkiz.com@80.245.18.66) by ns0.ovh.net with SMTP; 8 Apr 2015 10:18:18 +0200 From: =?UTF-8?q?Ga=C3=ABl=20PORTAY?= To: Nicolas Ferre , Boris Brezillon , Alexandre Belloni , Jean-Christophe PLAGNIOL-VILLARD Subject: [PATCH v2] ARM: at91/dt: add support for kizbox2 Date: Wed, 8 Apr 2015 10:17:56 +0200 Message-Id: <1428481076-6704-1-git-send-email-g.portay@overkiz.com> X-Mailer: git-send-email 1.9.1 MIME-Version: 1.0 X-Ovh-Tracer-Id: 16449960589547727724 X-Ovh-Remote: 80.245.18.66 () X-Ovh-Local: 213.186.33.20 (ns0.ovh.net) X-OVH-SPAMSTATE: OK X-OVH-SPAMSCORE: -100 X-OVH-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrfeektddrfeduucetufdoteggodetrfcurfhrohhfihhlvgemucfqggfjnecuuegrihhlohhuthemuceftddtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmd X-VR-SPAMSTATE: OK X-VR-SPAMSCORE: -100 X-VR-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrfeektddrfeduucetufdoteggodetrfcurfhrohhfihhlvgemucfqggfjnecuuegrihhlohhuthemuceftddtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmd X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20150408_011856_858372_72461511 X-CRM114-Status: GOOD ( 14.03 ) X-Spam-Score: -0.0 (/) X-Spam-Report: SpamAssassin version 3.4.0 on bombadil.infradead.org summary: Content analysis details: (-0.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [91.121.55.239 listed in list.dnswl.org] -0.0 RCVD_IN_MSPIKE_H3 RBL: Good reputation (+3) [91.121.55.239 listed in wl.mailspike.net] -0.0 SPF_PASS SPF: sender matches SPF record -0.0 RCVD_IN_MSPIKE_WL Mailspike good senders Cc: =?utf-8?q?Ga=C3=ABl=20PORTAY?= , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+incoming-imx=patchwork.ozlabs.org@lists.infradead.org List-Id: linux-imx-kernel.lists.patchwork.ozlabs.org Add DT file for Kizbox 2 board. This board is based on Atmel's SAMA5D31 Cortex-A5 SoC. Signed-off-by: Gaël PORTAY Acked-by: Boris Brezillon --- Changes since v1: - drop ek boards from compatible machine - drop useless pmc node arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-kizbox2.dts | 217 +++++++++++++++++++++++++++++++++++++ 2 files changed, 218 insertions(+) create mode 100644 arch/arm/boot/dts/at91-kizbox2.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9c11888..d2b559d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -37,6 +37,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ at91sam9x25ek.dtb \ at91sam9x35ek.dtb dtb-$(CONFIG_SOC_SAM_V7) += \ + at91-kizbox2.dtb \ at91-sama5d3_xplained.dtb \ sama5d31ek.dtb \ sama5d33ek.dtb \ diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts new file mode 100644 index 0000000..3f52835 --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox2.dts @@ -0,0 +1,217 @@ +/* + * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board + * + * Copyright (C) 2014 Gaël PORTAY + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d31.dtsi" +#include "sama5d3_emac.dtsi" +#include + +/ { + model = "Overkiz Kizbox 2"; + compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + chosen { + bootargs = "ubi.mtd=ubi"; + linux,stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x10000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + i2c1: i2c@f0018000 { + status = "okay"; + + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + status = "okay"; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddfuse_reg: LDO_REG1 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + vddana_reg: LDO_REG2 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vled_reg: LDO_REG3 { + regulator-name = "VLED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + v3v8_rf_reg: LDO_REG4 { + regulator-name = "V3V8_RF"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-always-on; + }; + }; + }; + }; + + usart0: serial@f001c000 { + status = "okay"; + }; + + usart1: serial@f0020000 { + status = "okay"; + }; + + pwm0: pwm@f002c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwmh0_1 + &pinctrl_pwm0_pwmh1_1 + &pinctrl_pwm0_pwmh2_0>; + status = "okay"; + }; + + adc0: adc@f8018000 { + atmel,adc-vref = <3333>; + status = "okay"; + }; + + usart2: serial@f8020000 { + status = "okay"; + }; + + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + dbgu: serial@ffffee00 { + status = "okay"; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + + usb1: ohci@00600000 { + status = "okay"; + }; + + usb2: ehci@00700000 { + status = "okay"; + }; + + nand0: nand@60000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; + + pwm_leds { + compatible = "pwm-leds"; + + blue { + label = "pwm:blue:user"; + pwms = <&pwm0 2 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + green { + label = "pwm:green:user"; + pwms = <&pwm0 1 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + red { + label = "pwm:red:user"; + pwms = <&pwm0 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + prog { + label = "PB_PROG"; + gpios = <&pioE 27 GPIO_ACTIVE_LOW>; + linux,code = <0x102>; + gpio-key,wakeup; + }; + + reset { + label = "PB_RST"; + gpios = <&pioE 29 GPIO_ACTIVE_LOW>; + linux,code = <0x100>; + gpio-key,wakeup; + }; + + user { + label = "PB_USER"; + gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; + linux,code = <0x101>; + gpio-key,wakeup; + }; + }; +};