diff mbox

[v3] ARM: mx25: Remove mach-mx25_3ds board file

Message ID 1425617851-7645-1-git-send-email-festevam@gmail.com
State New
Headers show

Commit Message

Fabio Estevam March 6, 2015, 4:57 a.m. UTC
From: Fabio Estevam <fabio.estevam@freescale.com>

imx25-pdk.dts provides a more complete support than the board file version, so
let's get rid of the board file.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v2:
- Do not use -D option when generating the patch

 arch/arm/mach-imx/Kconfig         |  15 ---
 arch/arm/mach-imx/Makefile        |   1 -
 arch/arm/mach-imx/mach-mx25_3ds.c | 270 --------------------------------------
 3 files changed, 286 deletions(-)
 delete mode 100644 arch/arm/mach-imx/mach-mx25_3ds.c

Comments

Shawn Guo March 6, 2015, 5:02 a.m. UTC | #1
On Fri, Mar 06, 2015 at 01:57:31AM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> imx25-pdk.dts provides a more complete support than the board file version, so
> let's get rid of the board file.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Applied, thanks.
diff mbox

Patch

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index f9d17f3..247a465 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -151,21 +151,6 @@  config MACH_MX21ADS
 
 comment "MX25 platforms:"
 
-config MACH_MX25_3DS
-	bool "Support MX25PDK (3DS) Platform"
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMXDI_RTC
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select SOC_IMX25
-
 config MACH_EUKREA_CPUIMX25SD
 	bool "Support Eukrea CPUIMX25 Platform"
 	select IMX_HAVE_PLATFORM_FLEXCAN
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 8d1b101..e92ede9 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -49,7 +49,6 @@  obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
 # i.MX25 based machines
-obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
 obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
deleted file mode 100644
index 584248a..0000000
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ /dev/null
@@ -1,270 +0,0 @@ 
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-/*
- * This machine is known as:
- *  - i.MX25 3-Stack Development System
- *  - i.MX25 Platform Development Kit (i.MX25 PDK)
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/usb/otg.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx25.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx25.h"
-#include "mx25.h"
-
-#define MX25PDK_CAN_PWDN	IMX_GPIO_NR(4, 6)
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const iomux_v3_cfg_t mx25pdk_pads[] __initconst = {
-	MX25_PAD_FEC_MDC__FEC_MDC,
-	MX25_PAD_FEC_MDIO__FEC_MDIO,
-	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
-	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
-	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
-	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
-	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
-	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
-
-	/* LCD */
-	MX25_PAD_LD0__LD0,
-	MX25_PAD_LD1__LD1,
-	MX25_PAD_LD2__LD2,
-	MX25_PAD_LD3__LD3,
-	MX25_PAD_LD4__LD4,
-	MX25_PAD_LD5__LD5,
-	MX25_PAD_LD6__LD6,
-	MX25_PAD_LD7__LD7,
-	MX25_PAD_LD8__LD8,
-	MX25_PAD_LD9__LD9,
-	MX25_PAD_LD10__LD10,
-	MX25_PAD_LD11__LD11,
-	MX25_PAD_LD12__LD12,
-	MX25_PAD_LD13__LD13,
-	MX25_PAD_LD14__LD14,
-	MX25_PAD_LD15__LD15,
-	MX25_PAD_GPIO_E__LD16,
-	MX25_PAD_GPIO_F__LD17,
-	MX25_PAD_HSYNC__HSYNC,
-	MX25_PAD_VSYNC__VSYNC,
-	MX25_PAD_LSCLK__LSCLK,
-	MX25_PAD_OE_ACD__OE_ACD,
-	MX25_PAD_CONTRAST__CONTRAST,
-
-	/* Keypad */
-	MX25_PAD_KPP_ROW0__KPP_ROW0,
-	MX25_PAD_KPP_ROW1__KPP_ROW1,
-	MX25_PAD_KPP_ROW2__KPP_ROW2,
-	MX25_PAD_KPP_ROW3__KPP_ROW3,
-	MX25_PAD_KPP_COL0__KPP_COL0,
-	MX25_PAD_KPP_COL1__KPP_COL1,
-	MX25_PAD_KPP_COL2__KPP_COL2,
-	MX25_PAD_KPP_COL3__KPP_COL3,
-
-	/* SD1 */
-	MX25_PAD_SD1_CMD__SD1_CMD,
-	MX25_PAD_SD1_CLK__SD1_CLK,
-	MX25_PAD_SD1_DATA0__SD1_DATA0,
-	MX25_PAD_SD1_DATA1__SD1_DATA1,
-	MX25_PAD_SD1_DATA2__SD1_DATA2,
-	MX25_PAD_SD1_DATA3__SD1_DATA3,
-	MX25_PAD_A14__GPIO_2_0, /* WriteProtect */
-	MX25_PAD_A15__GPIO_2_1, /* CardDetect */
-
-	/* I2C1 */
-	MX25_PAD_I2C1_CLK__I2C1_CLK,
-	MX25_PAD_I2C1_DAT__I2C1_DAT,
-
-	/* CAN1 */
-	MX25_PAD_GPIO_A__CAN1_TX,
-	MX25_PAD_GPIO_B__CAN1_RX,
-	MX25_PAD_D14__GPIO_4_6,	/* CAN_PWDN */
-};
-
-static const struct fec_platform_data mx25_fec_pdata __initconst = {
-	.phy    = PHY_INTERFACE_MODE_RMII,
-};
-
-#define FEC_ENABLE_GPIO		IMX_GPIO_NR(2, 3)
-#define FEC_RESET_B_GPIO	IMX_GPIO_NR(4, 8)
-
-static void __init mx25pdk_fec_reset(void)
-{
-	gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
-	gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
-
-	gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
-	gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
-	udelay(2);
-
-	/* turn on PHY power and lift reset */
-	gpio_set_value(FEC_ENABLE_GPIO, 1);
-	gpio_set_value(FEC_RESET_B_GPIO, 1);
-}
-
-static const struct mxc_nand_platform_data
-mx25pdk_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-static struct imx_fb_videomode mx25pdk_modes[] = {
-	{
-		.mode	= {
-			.name		= "CRT-VGA",
-			.refresh	= 60,
-			.xres		= 640,
-			.yres		= 480,
-			.pixclock	= 39683,
-			.left_margin	= 45,
-			.right_margin	= 114,
-			.upper_margin	= 33,
-			.lower_margin	= 11,
-			.hsync_len	= 1,
-			.vsync_len	= 1,
-		},
-		.bpp	= 16,
-		.pcr	= 0xFA208B80,
-	},
-};
-
-static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = {
-	.mode		= mx25pdk_modes,
-	.num_modes	= ARRAY_SIZE(mx25pdk_modes),
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-};
-
-static const uint32_t mx25pdk_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_DOWN),
-	KEY(0, 2, KEY_VOLUMEDOWN),
-	KEY(0, 3, KEY_HOME),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(1, 1, KEY_LEFT),
-	KEY(1, 2, KEY_ENTER),
-	KEY(1, 3, KEY_VOLUMEUP),
-	KEY(2, 0, KEY_F6),
-	KEY(2, 1, KEY_F8),
-	KEY(2, 2, KEY_F9),
-	KEY(2, 3, KEY_F10),
-	KEY(3, 0, KEY_F1),
-	KEY(3, 1, KEY_F2),
-	KEY(3, 2, KEY_F3),
-	KEY(3, 3, KEY_POWER),
-};
-
-static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = {
-	.keymap		= mx25pdk_keymap,
-	.keymap_size	= ARRAY_SIZE(mx25pdk_keymap),
-};
-
-static int mx25pdk_usbh2_init(struct platform_device *pdev)
-{
-	return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
-	.init	= mx25pdk_usbh2_init,
-	.portsc	= MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_UTMI,
-};
-
-static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = {
-	.bitrate = 100000,
-};
-
-#define SD1_GPIO_WP	IMX_GPIO_NR(2, 0)
-#define SD1_GPIO_CD	IMX_GPIO_NR(2, 1)
-
-static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
-	.wp_gpio = SD1_GPIO_WP,
-	.cd_gpio = SD1_GPIO_CD,
-	.wp_type = ESDHC_WP_GPIO,
-	.cd_type = ESDHC_CD_GPIO,
-};
-
-static void __init mx25pdk_init(void)
-{
-	imx25_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
-			ARRAY_SIZE(mx25pdk_pads));
-
-	imx25_add_imx_uart0(&uart_pdata);
-	imx25_add_fsl_usb2_udc(&otg_device_pdata);
-	imx25_add_mxc_ehci_hs(&usbh2_pdata);
-	imx25_add_mxc_nand(&mx25pdk_nand_board_info);
-	imx25_add_imxdi_rtc();
-	imx25_add_imx_fb(&mx25pdk_fb_pdata);
-	imx25_add_imx2_wdt();
-
-	mx25pdk_fec_reset();
-	imx25_add_fec(&mx25_fec_pdata);
-	imx25_add_imx_keypad(&mx25pdk_keymap_data);
-
-	imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
-	imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
-
-	gpio_request_one(MX25PDK_CAN_PWDN, GPIOF_OUT_INIT_LOW, "can-pwdn");
-	imx25_add_flexcan0();
-}
-
-static void __init mx25pdk_timer_init(void)
-{
-	mx25_clocks_init();
-}
-
-MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.atag_offset = 0x100,
-	.map_io = mx25_map_io,
-	.init_early = imx25_init_early,
-	.init_irq = mx25_init_irq,
-	.init_time	= mx25pdk_timer_init,
-	.init_machine = mx25pdk_init,
-	.restart	= mxc_restart,
-MACHINE_END